Search

Abstract: Fluidized Bed Membrane Reactors gain worldwide increasing interest for various applications. Nevertheless, fundamental research on the hydrodynamics of these reactors is required in order to improve the predictive capabilities of numerical models and to improve reactor performance. This study comprises an experimental investigation in a pseudo-2D gas–solid fluidized bed containing horizontal submerged membrane tubes, through which gas can be added to – or extracted from – the fluidized suspension. Employing Particle Image Velocimetry (PIV) combined with a novel Digital Image Analysis (DIA) technique, the effect of the presence of, and permeation of gas through the membranes, on both the solids flux profiles as well as the bubble properties has been investigated in great detail for different membrane configurations. It has been shown that merely the presence of the membrane tubes decreases the solid fluxes by about a factor three, but does not significantly change the overall circulation patterns in the bed. The permeation ratio and the membrane tube arrangement (in-line vs. staggered, size and number of membranes) hardly influence the time-averaged solid flux profiles. In addition, it has been found that, compared to a fluidized bed without inserts, the average bubble size with horizontally submerged membrane tubes decreases by a factor of approximately three, but is hardly dependent on the permeation ratio. The average total superficial gas velocity is more important than the permeation ratio. With respect to bubble size and number of bubbles, the staggered membrane arrangement with 9.6mm tubes outperforms the in-line arrangement, the arrangement with smaller tubes and the arrangement with fewer membrane tubes, which is of great benefit to reduce bubble-to-emulsion phase mass transfer limitations in fluidized bed membrane reactors under reactive conditions. [Copyright &y& Elsevier]

Abstract: Among many research studies on fluidized bed membrane reactors, only very few focus on the details of the effects of gas permeation through the membranes on the hydrodynamic properties of the membrane-assisted fluidized bed. For this reason, in the first part of this paper, a novel hybrid Immersed Boundary Method (IBM) Discrete Particle Model (DPM) has been developed. In the second part of the paper, this model is employed to investigate fluidized bed membrane reactors in more detail. Simulations without membrane inserts (having vertical membranes at the side walls instead), with membrane tubes in an in-line arrangement and membranes in a staggered arrangement are compared with each other. The time-averaged particle fraction maps display a lower bed height for the simulations with inserts. A very important aspect of the simulation with gas extraction/addition via the side walls is the solids circulation; an inversion of the solids circulation is observed when gas is added via the side walls with altered bubble properties. Because of this phenomenon, the bubble size counter-intuitively decreases when gas is added, and increases slightly when gas is extracted. The latter is a result of the existence of compacted zones near the membranes. For the simulation cases with membrane inserts, the solids circulation and bubble properties are different; in these cases they mainly depend on the local fluidization velocity, and not so much on the extent of permeation itself. Although the arrangement of the membrane tubes plays only a minor role in this matter, their presence has a pronounced influence on the bubble size. The system''s energy and energy dissipation are both smaller for the simulations with inserts compared to those with permeation via the side walls. Also in this respect, the local fluidization velocity is found to be more important than the extent of permeation. [Copyright &y& Elsevier]

Abstract: Many novel reactor concepts based on the integration of membranes in fluidized beds have been proposed. For the detailed numerical investigation of such systems, a method is required describing the motion of the particles while accounting for (i) the gas motion and (ii) the encounters between particles and confining walls/membranes. In this paper a novel hybrid computational method is presented, combining the Discrete Particle Model (DPM) and the Immersed Boundary Method (IBM). The first part focuses on the implementation and validation of these models. The IBM component of the model has been verified by comparing the computed drag coefficients for Simple Cubic (SC) arrays of cylinders with data of Sangani and Acrivos (1982) at creeping flow conditions. For higher Reynolds numbers the code has been compared to Ferziger and Peric (2002) for a single off-center cylinder, after which simulations with addition and extraction of gas through the membrane surface have been conducted. In the second part of this work we will focus on actual fluidized bed membrane systems, and will report results of simulations for several membrane geometries as well as permeation ratios. [Copyright &y& Elsevier]

Abstract: Recently, many novel reactor concepts based on membrane fluidized bed reactors have been proposed. In this work, the effects of gas permeation through flat membranes on the hydrodynamics in a pseudo-2D membrane-assisted gas–solid fluidized bed have been investigated experimentally. A combination of the non-invasive techniques (Particle Image Velocimetry (PIV) and Digital Image Analysis (DIA)) was employed to simultaneously investigate solids phase and bubble phase properties in great detail. Counter-intuitively, addition of secondary gas via the membranes, that constituted the confining walls of a gas–solid suspension at conditions close to incipient fluidization, did not result in a larger, but in a smaller equivalent bubble diameter, while gas extraction on the other hand, resulted in a larger equivalent bubble diameter, although in this case the effect was less pronounced. This could be explained by changes in the larger scale particle circulation patterns due to gas extraction and addition via the membranes. [Copyright &y& Elsevier]