Search

The present contribution investigates the possibility to obtain thermospheric neutral density estimates using satellite laser ranging (SLR) observations of low Earth orbiters (LEOs). This approach is based on the analysis of the satellite atmospheric drag, driven by the fact that the drag force is the largest non-gravitational perturbation acting on LEOs. Due to the uncertainty of current thermospheric models, it is the main error source in the LEO orbit determination process. Moreover, the drag is physically related to the thermospheric density distribution, the interaction of the satellite surface with the surrounding thermosphere and thermospheric winds. For this investigation, a spherical satellite called "Atmospheric Neutral Density Experiment-Pollux" (ANDE-P) developed by the Naval Research Laboratory (USA) is adopted as a case study. The satellite flew at the very low altitude of about 350 km. The most important perturbing acceleration at this altitude, the atmospheric drag, is easier to model for a spherical satellite like ANDE-P than for a satellite of complex geometry. A precise orbit determination of ANDE-P was performed with the DGFI Orbit and Geodetic parameter estimation Software (DOGS) over a period of 49 days (16 August 2009 until 3 October 2009) using SLR observations to this satellite and different thermospheric models. In total, we tested four thermospheric models, namely CIRA86, NRLMSISE00, JB2008 and DTM2013. Correspondingly, scale factors of these reference models are estimated with a 6-h resolution. The results confirm that the estimation of force model parameters from SLR measurements of the ANDE-P satellite is sensitive to differences in the density distributions provided by different models. As a consequence, information on the discrepancies between the various models and the true density can be derived from SLR measurements. Moreover, it is found that SLR observations to LEO satellites at very low altitudes are capable to estimate corrections to (scale factors of) the integrated thermospheric density if all other perturbing accelerations are modelled with sufficient accuracy. We derived time series of estimated scale factors of the thermospheric densities provided by the models and obtained the following mean values during the processed period of time at the ANDE-P altitude: 0.65±0.26 for CIRA86, 0.65±0.25 for NRLMSISE00, 0.79±0.24 for DTM2013, and 0.89±0.27 for JB2008. This suggests that all models overestimate the true thermospheric density along the ANDE-P trajectory during the processed period to a certain extent. The thermospheric densities need to be scaled downwards to fit ANDE-P SLR observations with JB2008 requiring the least amount of scaling. [ABSTRACT FROM AUTHOR]

During the last decade a significant progress has been reached in the investigation of the gravity field of the Earth. Besides static, also time variable geopotential models have been recently created. In this paper we investigate the impact of the recent time variable geopotential models on altimetry satellite orbits and such altimetry products based on these orbits, as global and regional mean sea level trends. We show that the modeling of time variable gravity improves the orbit solutions, at least for the GRACE period where time variable gravity is sufficiently accurately observed by this mission. Our analysis includes six geopotential models jointly developed by GFZ German Research Centre for Geosciences and Space Geodesy Research Group (CNES/GRGS) Toulouse: the stationary model EIGEN-GL04S, a stationary version of EIGEN-6S (EIGEN-6S_stat), a corrected version of EIGEN-6S and three enhanced versions of EIGEN-6S called EIGEN-6S2, EIGEN-6S2A and EIGEN-6S2B. By “stationary” we mean “containing periodic parameters such as annual and semi-annual variations, but no secular (drift) terms”. We computed precise orbits for the radar altimetry satellites ERS-1, ERS-2, TOPEX/Poseidon, and Envisat over 20years between 1991 and 2011. The orbit, single-mission and multi-mission altimetry crossover analyses show that the time variable models EIGEN-6S_corrected, EIGEN-6S2 and its two precursors EIGEN-6S2A/B perform notably better than the stationary models for the GRACE period from 2003 onwards. Thus, using EIGEN-6S2 and EIGEN-6S2A/B we have got 3.6% smaller root mean square fits of satellite laser ranging observations for Envisat, as when using EIGEN-GL04S. However, for the pre-GRACE period 1991–2003, the stationary geopotential models EIGEN-GL04S and EIGEN-6S_stat as well as EIGEN-6S2 having no drift terms for degree 3–50 at this time interval perform superior compared to EIGEN-6S_correct and EIGEN-6S2A/B which contain drifts for this period. We found, that the time variable geopotential models have a low (0.1–0.2mm/yr) impact on our results for the global mean sea level trend. However, we found strong East/West differences up to 3mm/yr in the regional mean sea level trends when using orbits of all four satellites based on time variable and stationary geopotential models. We show that these differences are related to the relative drifts of the centers-of-origin between the orbit solutions based on the time variable and stationary geopotential models. From the results of our detailed study, we conclude that the final version of the time variable gravity field model EIGEN-6S2 performs best for the four satellites tested. This model provides the most reliable and mission-consistent sea level estimates for the whole time period from 1992 to 2010. This model is of maximum spherical harmonic degree and order 260 and contains time series for drifts as well as annual and semiannual variations of the spherical harmonic coefficients for degree 2–50. [ABSTRACT FROM AUTHOR]

For low Earth orbiting satellites, non-gravitational forces cause one of the largest perturbing accelerations. During a precise orbit determination (POD), the accurate modeling of the satellite-body attitude and solar panel orientation is important since the satellite's effective cross-sectional area is directly related to the perturbing acceleration. Moreover, the position of tracking instruments that are mounted on the satellite body are affected by the satellite attitude. For satellites like Jason-1/-2/-3, attitude information is available in two forms—as a so-called nominal yaw steering model and as observation-based (measured by star tracking cameras) quaternions of the spacecraft body orientation and rotation angles of the solar arrays. In this study, we have developed a preprocessing procedure for publicly available satellite attitude information. We computed orbits based on Satellite Laser Ranging (SLR) observations to the Jason satellites at an overall time interval of approximately 25 years, using each of the two satellite attitude representations. Based on the analysis of the orbits, we investigate the influence of using preprocessed observation-based attitude in contrast to using a nominal yaw steering model for the POD. About 75% of all orbital arcs calculated with the observation-based satellite attitude data result in a smaller root mean square (RMS) of residuals. More precisely, the resulting orbits show an improvement in the overall mission RMS of SLR observation residuals of 5.93% (Jason-1), 8.27% (Jason-2) and 4.51% (Jason-3) compared to the nominal attitude realization. Besides the satellite orbits, also the estimated station coordinates benefit from the refined attitude handling, that is, the station repeatability is clearly improved at the draconitic period. Moreover, altimetry analysis indicates a clear improvement of the single-satellite crossover differences (6%, 15%, and 16% reduction of the mean of absolute differences and 1.2%, 2.7%, and 1.3% of their standard deviations for Jason-1/-2/-3, respectively). On request, the preprocessed attitude data are available. [ABSTRACT FROM AUTHOR]