Search

In recent years, harvesting solar energy as a renewable and sustainable energy source has been studied extensively across engineering fields. Having reviewed more than 50 large-scale projects of Hydronic Asphalt Pavement (HAP), this paper offers a series of findings: the range of construction cost of asphalt collector varies between 25 and 151 €/m2 and 1.760–3.000 €/m2 for the heat exchanger and the total cost. The energy harvest capacity of asphalt solar collector systems (0,6–0,8 GJ/m2/year) and the required amount of heat for snow melting projects (100–900 W/m2) vary significantly in different projects. Using grid supports for easier pipe placement and protection of pipes against heavy loads during and after construction is recommended. Pavement solar collector systems reduced carbon dioxide emissions by 8–100% in different projects by changing their source of energy from fossil fuels to renewable and sustainable sources. Moreover, in order to further evaluate the sustainability of the HAP systems, a detailed life cycle assessment is required, including all available data related to the energy performance, pavement service life, material end-of-life recycling, etc. Finally, the paper identifies the knowledge gaps requiring further research especially in the area of energy output of the HAP systems, pavement service life and life cycle assessment. • A comprehensive review of large-scale hydronic asphalt pavement projects is provided. • Potential challenges in the large-scale hydronic asphalt pavement are investigated. • Technical specifications, operational aspects and performance are explored. • Construction cost and structural response of systems are analyzed. • The projects' performance is evaluated based on energy output and sustainability. [ABSTRACT FROM AUTHOR]

• Heating and cooling tests on a fully monitored large-scale pavement solar collector. • Thermal performance investigation of a controllable and configurable prototype. • Sensitivity analysis of design and operational parameters on system performance. • A great potential in reducing asphalt surface temperature to mitigate UHI effects. Solar energy harvesting as a renewable and sustainable energy source has been widely investigated in recent years across engineering fields. The use of Pavement Solar Collectors (PSC) can lead to clean energy production, an increase in road safety, prolong the service life of asphalt pavement, and can mitigate the Urban Heat Island (UHI) effect. This study describes a controllable large-scale research PSC prototype with high configuration flexibility, and full monitoring capability at the University of Antwerp, Belgium. Since small- or laboratory-scale setups do not reflect the behavior of actual projects, the present paper investigates the thermal response of a large-scale PSC in the Western European climate, including heating load, heat extraction capacity, and asphalt surface and profile temperature changes during heating and cooling experiments. The study shows that a low supply temperature compared to high (14 °C vs. 28 °C) can reduce the depletion rate of the stored thermal energy in borehole thermal energy storage up to 7 times. The sensitivity analysis indicates that an increase in flow rate from laminar to transient regime requires twice as much thermal power compared to the same flow rate changes within transient and turbulent regimes. The maximum average daily efficiency of the PSC could reach 34% with a flow rate of 4 l/min. The experimental results showed that increasing the pipe length from 50 m to 200 m reduces the cumulative power extraction capacity by up to 48%. Furthermore, the PSC system shows great potential in reducing the asphalt surface temperature (up to 12 °C) to mitigate the UHI effects. Finally, the PSC system effectively controls the temperatures of the interface zones to reduce the rutting distress in the summertime and lower the potential of cold thermal crack developments and brittle shear failure behavior in wintertime. [ABSTRACT FROM AUTHOR]