Search

We present the results of investigations on the possibility of the application of the asphaltene fraction isolated from the oxidized residue from vacuum distillation of crude oil as a stationary phase for gas chromatography. The results of the investigation revealed that the asphaltene stationary phases can find use for the separation of a wide range of volatile organic compounds. The experimental values of Rohrschneider/McReynolds constants characterize the asphaltenes as stationary phases of medium polarity and selectivity similar to commercially available phases based on alkyl phthalates. Isolation of asphaltenes from the material obtained under controlled process conditions allows the production of a stationary phase having reproducible sorption properties and chromatographic columns having the same selectivity. Unique selectivity and high thermal stability make asphaltenes attractive as a material for stationary phases for gas chromatography. A low production cost from a readily available raw material (oxidized petroleum bitumens) is an important economic factor in case of application of the asphaltene stationary phases for preparative and process separations. [ABSTRACT FROM AUTHOR]

[Display omitted] • An efficient and economical adsorbent for waste gases treatment. • Remarkable enhancement of adsorption capacity by nitrated asphaltenes. • Over 2 times higher adsorption capacity for benzene comparing to Carbotrap adsorbent. • Detailed examination by inverse gas chromatography explained VOCs adsorption. • Step forward in design of adsorbents for removal of environmental pollutants. Asphaltenes isolated from bitumen possess unusual adsorption characteristics that can be further enhanced by chemical modifications to promote interactions with VOCs'. Herein, nitrated asphaltenes are used as an active layer coated on a surface of a diatomaceous earth, in order to prepare an efficient adsorbent (AsfNitro). Breakthrough experiments with benzene, pyridine, and 1-nitropropane revealed significant increase in adsorption capacity, after deposition of nitrated asphaltenes, by 26, 12, and 8 times respectively. The adsorption capacity of AsfNitro for benzene per square meter of surface area is far more superior than for other adsorbents in use. Moreover, the AsfNitro exhibited excellent efficiency. For adsorption of 1-nitropropane and pyridine, almost 100% of the adsorbent's bed was effectively used. Inverse gas chromatography measurements proved that nitrated asphaltenes were exclusively responsible for the adsorption properties, and the role of the diatomaceous earth was only to provide the surface area. Presented findings can be extended to other support materials and their inherent limitations for adsorption of VOCs can be overcome. Comparison of adsorption enthalpies demonstrated that common adsorbents e.g. activated carbons, cannot compete with AsfNitro in terms of sorbate-sorbent interactions. Additionally, contribution of chemisorption mechanism was recognized for AsfNitro, which indicate catalytic properties, and opens a new research field about asphaltenes' novel practical applications. Application of asphaltenes in adsorption processes can be an effective procedure for risk mitigation of hazardous VOCs, accompanied by effective waste management and materials' valorisation. Wasted adsorbent can be easily regenerated (without deterioration of surface properties), or blended in bitumen-aggregates mixes for road paving applications. [ABSTRACT FROM AUTHOR]