Search

A near-IR high-resolution, R=80000 spectrometer has been developed at IPAG to directly characterize the atmosphere of exoplanets using adaptive optics (AO) assisted telescopes, and a single-mode fiber-injection unit. A first technical test with the 200' Hale telescope at Palomar Observatory occurred in March 2022 using the PALM3000 AO system offered by this telescope. Observations have also been made at the same time with the PARVI spectrometer so that a direct comparison can be made between the two instruments. This spectrometer uses a virtually imaged phased array (VIPA) instead of an echelle grating, resulting in a very compact optical layout that fits in a 0.25m3 cryostat. Using a quarter of an H2RG detector, the spectrometer analyses the middle part of the H-band, from 1.57 to 1.7 microns for 2 sources whose light is transferred from the telescope to the spectrometer using single-mode fibers. By design, the transmission of the spectrometer is expected to be 40-50%, which is 2-3 times higher than the transmission of current high-resolution spectrometers such as CRIRES+ and NIRSPEC. A damaged cross-disperser limited it to 21%, however. A replacement grating with a correct, twice as high efficiency has been procured after the on-sky demonstration. In addition to recalling the main specifications of the VIPA spectrometer, this paper presents the control software, the calibration process, and the reduction pipeline that have been developed for the instrument. It also presents the results of the on-sky technical test with the Hale telescope, as well as measurements of the effective resolution and transmission, along with a comparison of a spectrum of the sun obtained with the spectrometer with the BASS2000 reference spectrum. Planned modifications are also discussed. That includes the integration of a new dedicated H2RG detector, and of K-band optics.

AMICal sat, a dedicated 2U cubesat, has been developed, in order to monitor the auroral emissions, with a dedicated imager. It aims to help to reconstruct the low energy electrons fluxes up to 30 keV in Earth auroral regions. It includes an imager entirely designed in Grenoble University Space Center. The imager uses a 1.3 Mpixels sparse RGB CMOS detector and a wide field objective (f=22.5 mm). The satellite platform has been built by the polish company Satrevolution. Launched September, 3rd, 2020 from Kuru (French Guyana) on board the Vega flight 16, it produces its first images in October 2020. The aim of this paper is to describe the design of the payload especially the optics and the proximity electronics, to describe the use of the payload for space weather purpose. A preliminary analysis of a first image showing the relevance of such an instrument for auroral monitoring is performed. This analysis allowed to reconstruct from one of the first images the local electron input flux at the top of the atmosphere during the exposure time., Comment: Submitted to IEEE-JMASS. Under review