Search

Molecular clouds (MC) are structures of dense gas in the interstellar medium (ISM), that extend from ten to a few hundred parsecs and form the main gas reservoir available for star formation. Hydrodynamical simulations of varying complexity are a promising way to investigate MC evolution and their properties. However, each simulation typically has a limited range in resolution and different cloud extraction algorithms are used, which complicates the comparison between simulations. In this work, we aim to extract clouds from different simulations covering a wide range of spatial scales. We compare their properties, such as size, shape, mass, internal velocity dispersion and virial state. We apply the Hop cloud detection algorithm on (M)HD numerical simulations of stratified ISM boxes and isolated galactic disk simulations that were produced using Flash Ramses and Arepo We find that the extracted clouds are complex in shape ranging from round objects to complex filamentary networks in all setups. Despite the wide range of scales, resolution, and sub-grid physics, we observe surprisingly robust trends in the investigated metrics. The mass spectrum matches in the overlap between simulations without rescaling and with a high-mass slope of $\mathrm{d} N/\mathrm{d}\ln M\propto-1$ in accordance with theoretical predictions. The internal velocity dispersion scales with the size of the cloud as $\sigma\propto R^{0.75}$ for large clouds ($R\gtrsim3\,\mathrm{pc}$). For small clouds we find larger sigma compared to the power-law scaling, as seen in observations, which is due to supernova-driven turbulence. Almost all clouds are gravitationally unbound with the virial parameter scaling as $\alpha_\mathrm{vir}\propto M^{-0.4}$, which is slightly flatter compared to observed scaling, but in agreement given the large scatter., Comment: 22 pages, 16 figures, proposed for acceptance in A&A

Star formation is a complex multi-scale phenomenon that is of significant importance for astrophysics in general. Stars and star formation are key pillars in observational astronomy from local star forming regions in the Milky Way up to high-redshift galaxies. From a theoretical perspective, star formation and feedback processes (radiation, winds, and supernovae) play a pivotal role in advancing our understanding of the physical processes at work, both individually and of their interactions. In this review we will give an overview of the main processes that are important for the understanding of star formation. We start with an observationally motivated view on star formation from a global perspective and outline the general paradigm of the life-cycle of molecular clouds, in which star formation is the key process to close the cycle. After that we focus on the thermal and chemical aspects in star forming regions, discuss turbulence and magnetic fields as well as gravitational forces. Finally, we review the most important stellar feedback mechanisms., Comment: 86 pages, 4 figures. To appear in Space Science Reviews, topical collection Star formation

Star clusters form in dense, hierarchically collapsing gas clouds. Bulk kinetic energy is transformed to turbulence with stars forming from cores fed by filaments. In the most compact regions, stellar feedback is least effective in removing the gas and stars may form very efficiently. These are also the regions where, in high-mass clusters, ejecta from some kind of high-mass stars are effectively captured during the formation phase of some of the low mass stars and effectively channeled into the latter to form multiple populations. Star formation epochs in star clusters are generally set by gas flows that determine the abundance of gas in the cluster. We argue that there is likely only one star formation epoch after which clusters remain essentially clear of gas by cluster winds. Collisional dynamics is important in this phase leading to core collapse, expansion and eventual dispersion of every cluster. We review recent developments in the field with a focus on theoretical work., Comment: 53 pages, 7 figures, preprint of a review to appear in Space Science Reviews Topical collection "Star formation". Changes in this version: updated comments line to to acceptance of the paper by the journal

We present three-dimensional radiation-hydrodynamical simulations of the impact of stellar winds, photoelectric heating, photodissociating and photoionising radiation, and supernovae on the chemical composition and star formation in a stratified disc model. This is followed with a sink-based model for star clusters with populations of individual massive stars. Stellar winds and ionising radiation regulate the star formation rate at a factor of ~10 below the simulation with only supernova feedback due to their immediate impact on the ambient interstellar medium after star formation. Ionising radiation (with winds and supernovae) significantly reduces the ambient densities for most supernova explosions to rho < 10^-25 g cm^-3, compared to 10^-23 g cm^-3 for the model with only winds and supernovae. Radiation from massive stars reduces the amount of molecular hydrogen and increases the neutral hydrogen mass and volume filling fraction. Only this model results in a molecular gas depletion time scale of 2 Gyr and shows the best agreement with observations. In the radiative models, the Halpha emission is dominated by radiative recombination as opposed to collisional excitation (the dominant emission in non-radiative models), which only contributes ~1-10 % to the total Halpha emission. Individual massive stars (M >= 30 M_sun) with short lifetimes are responsible for significant fluctuations in the Halpha luminosities. The corresponding inferred star formation rates can underestimate the true instantaneous star formation rate by factors of ~10., Comment: submitted to MNRAS, movies https://hera.ph1.uni-koeln.de/~silcc/

Dust grains are an important component of the interstellar medium (ISM) of galaxies. We present the first direct measurement of the residence times of interstellar dust in the different ISM phases, and of the transition rates between these phases, in realistic hydrodynamical simulations of the multi-phase ISM. Our simulations include a time-dependent chemical network that follows the abundances of H^+, H, H_2, C^+ and CO and take into account self-shielding by gas and dust using a tree-based radiation transfer method. Supernova explosions are injected either at random locations, at density peaks, or as a mixture of the two. For each simulation, we investigate how matter circulates between the ISM phases and find more sizeable transitions than considered in simple mass exchange schemes in the literature. The derived residence times in the ISM phases are characterised by broad distributions, in particular for the molecular, warm and hot medium. The most realistic simulations with random and mixed driving have median residence times in the molecular, cold, warm and hot phase around 17, 7, 44 and 1 Myr, respectively. The transition rates measured in the random driving run are in good agreement with observations of Ti gas-phase depletion in the warm and cold phases in a simple depletion model, although the depletion in the molecular phase is under-predicted. ISM phase definitions based on chemical abundance rather than temperature cuts are physically more meaningful, but lead to significantly different transition rates and residence times because there is no direct correspondence between the two definitions., Comment: submitted to MNRAS, movies https://hera.ph1.uni-koeln.de/~silcc/

The halo of the Milky Way contains a hot plasma with a surface brightness in soft X-rays of the order $10^{-12}$erg cm$^{-2}$ s$^{-1}$ deg$^{-2}$. The origin of this gas is unclear, but so far numerical models of galactic star formation have failed to reproduce such a large surface brightness by several orders of magnitude. In this paper, we analyze simulations of the turbulent, magnetized, multi-phase interstellar medium including thermal feedback by supernova explosions as well as cosmic-ray feedback. We include a time-dependent chemical network, self-shielding by gas and dust, and self-gravity. Pure thermal feedback alone is sufficient to produce the observed surface brightness, although it is very sensitive to the supernova rate. Cosmic rays suppress this sensitivity and reduce the surface brightness because they drive cooler outflows. Self-gravity has by far the largest effect because it accumulates the diffuse gas in the disk in dense clumps and filaments, so that supernovae exploding in voids can eject a large amount of hot gas into the halo. This can boost the surface brightness by several orders of magnitude. Although our simulations do not reach a steady state, all simulations produce surface brightness values of the same order of magnitude as the observations, with the exact value depending sensitively on the simulation parameters. We conclude that star formation feedback alone is sufficient to explain the origin of the hot halo gas, but measurements of the surface brightness alone do not provide useful diagnostics for the study of galactic star formation., Comment: ApJ Letters in press

We model driven, compressible, isothermal, turbulence with Mach numbers ranging from the subsonic ($\mathcal{M} \approx 0.65$) to the highly supersonic regime ($\mathcal{M}\approx 16 $). The forcing scheme consists both solenoidal (transverse) and compressive (longitudinal) modes in equal parts. We find a relation $\sigma_{s}^2 = \mathrm{b}\log{(1+\mathrm{b}^2\mathcal{M}^2)}$ between the Mach number and the standard deviation of the logarithmic density with $\mathrm{b} = 0.457 \pm 0.007$. The density spectra follow $\mathcal{D}(k,\,\mathcal{M}) \propto k^{\zeta(\mathcal{M})}$ with scaling exponents depending on the Mach number. We find $\zeta(\mathcal{M}) = \alpha \mathcal{M}^{\beta}$ with a coefficient $\alpha$ that varies slightly with resolution, whereas $\beta$ changes systematically. We extrapolate to the limit of infinite resolution and find $\alpha = -1.91 \pm 0.01,\, \beta =-0.30\pm 0.03$. The dependence of the scaling exponent on the Mach number implies a fractal dimension $D=2+0.96 \mathcal{M}^{-0.30}$. We determine how the scaling parameters depend on the wavenumber and find that the density spectra are slightly curved. This curvature gets more pronounced with increasing Mach number. We propose a physically motivated fitting formula $\mathcal{D}(k) = \mathcal{D}_0 k^{\zeta k^{\eta}}$ by using simple scaling arguments. The fit reproduces the spectral behaviour down to scales $k\approx 80$. The density spectrum follows a single power-law $\eta = -0.005 \pm 0.01$ in the low Mach number regime and the strongest curvature $\eta = -0.04 \pm 0.02$ for the highest Mach number. These values of $\eta$ represent a lower limit, as the curvature increases with resolution., Comment: 12 pages, 11 figures, MNRAS, submitted

Turbulence is a dominant feature operating in gaseous flows across nearly all scales in astrophysical environments. Accordingly, accurately estimating the statistical properties of such flows is necessary for developing a comprehensive understanding of turbulence. We develop and employ a hierarchical Bayesian fitting method to estimate the parameters describing the scaling relationships of the velocity power spectra of supersonic turbulence. We demonstrate the accuracy and other advantages of this technique compared with ordinary linear regression methods. Using synthetic power spectra, we show that the Bayesian method provides accurate parameter and error estimates. Commonly used normal linear regression methods can provide estimates that fail to recover the underlying slopes, up to 70% of the instances, even when considering the 2std.dev. uncertainties. Additionally, we apply the Bayesian methods to analyse the statistical properties of compressible turbulence in 3D numerical simulations. We model driven, isothermal, turbulence with rms Mach numbers in the highly supersonic regime M~15. We study the influence of purely solenoidal (divergence-free) and purely compressive (curl-free) forcing on the scaling exponent of the power spectrum. In simulations with solenoidal forcing and 1024^3 resolution, our results indicate that there is no extended inertial range with a constant scaling exponent. The bottleneck effect results in a curved power spectrum at all wave numbers and is more pronounced in the transversal modes compared with the longitudinal modes. Therefore, this effect is stronger in stationary turbulent flows driven by solenoidal forcing compared to the compressive one. The longitudinal spectrum driven with compressive forcing is the only spectrum with constant scaling exponent z=-1.94 +- 0.01, corresponding to slightly shallower slopes than the Burger's prediction., Comment: 10 pages, 6 figures

The time evolution of the probability density function (PDF) of the mass density is formulated and solved for systems in free-fall using a simple appoximate function for the collapse of a sphere. We demonstrate that a pressure-free collapse results in a power-law tail on the high-density side of the PDF. The slope quickly asymptotes to the functional form $\mathrm{P}_v(\rho)\propto\rho^{-1.54}$ for the (volume-weighted) PDF and $\mathrm{P}_m(\rho)\propto\rho^{-0.54}$ for the corresponding mass-weighted distribution. From the simple approximation of the PDF we derive analytic descriptions for mass accretion, finding that dynamically quiet systems with narrow density PDFs lead to retarded star formation and low star formation rates. Conversely, strong turbulent motions that broaden the PDF accelerate the collapse causing a bursting mode of star formation. Finally, we compare our theoretical work with observations. The measured star formation rates are consistent with our model during the early phases of the collapse. Comparison of observed column density PDFs with those derived from our model suggests that observed star-forming cores are roughly in free-fall., Comment: accepted for publication, 13 pages

The probability density function (PDF) of the gas density in subsonic and supersonic, isothermal, driven turbulence is analyzed with a systematic set of hydrodynamical grid simulations with resolutions up to 1024^3 cells. We performed a series of numerical experiments with root mean square (r.m.s.) Mach number M ranging from the nearly incompressible, subsonic (M=0.1) to the highly compressible, supersonic (M=15) regime. We study the influence of two extreme cases for the driving mechanism by applying a purely solenoidal (divergence-free) and a purely compressive (curl-free) forcing field to drive the turbulence. We find that our measurements fit the linear relation between the r.m.s. Mach number and the standard deviation of the density distribution in a wide range of Mach numbers, where the proportionality constant depends on the type of the forcing. In addition, we propose a new linear relation between the standard deviation of the density distribution and the standard deviation of the velocity in compressible modes, i.e. the compressible component of the r.m.s. Mach number. In this relation the influence of the forcing is significantly reduced, suggesting a linear relation between the standard deviation of the density distribution and the standard deviation of the velocity in compressible modes, independent of the forcing, ranging from the subsonic to the supersonic regime., Comment: 8 pages,6 figures, The Astrophysical Journal (submitted)

We investigate the formation of protostellar clusters during the collapse of dense molecular cloud cores with a focus on the evolution of potential and kinetic energy, the degree of substructure, and the early phase of mass segregation. Our study is based on a series of hydrodynamic simulations of dense cores, where we vary the initial density profile and the initial turbulent velocity. In the three-dimensional adaptive mesh refinement simulations, we follow the dynamical formation of filaments and protostars until a star formation efficiency of 20%. Despite the different initial configurations, the global ensemble of all protostars in a setup shows a similar energy evolution and forms sub-virial clusters with an energy ratio $E_\mathrm{kin}/|E_\mathrm{pot}|\sim0.2$. Concentrating on the innermost central region, the clusters show a roughly virialised energy balance. However, the region of virial balance only covers the innermost $\sim10-30%$ of all the protostars. In all simulations with multiple protostars, the total kinetic energy of the protostars is higher than the kinetic energy of the gas cloud, although the protostars only contain 20% of the total mass. The clusters vary significantly in size, mass, and number of protostars, and show different degrees of substructure and mass segregation. Flat density profiles and compressive turbulent modes produce more subclusters then centrally concentrated profiles and solenoidal turbulence. We find that dynamical relaxation and hence dynamical mass segregation is very efficient in all cases from the very beginning of the nascent cluster, i.e., during a phase when protostars are constantly forming and accreting., Comment: 19 pages, MNRAS accepted

We investigate the impact of different initial conditions for the initial density profile and the initial turbulence on the formation process of protostellar clusters. We study the collapse of dense molecula r cloud cores with three-dimensional adaptive mesh refinement simulations. We focus our discussion on the distribution of the gas among the protostellar objects in the turbulent dynamical cores. Despite the large variations in the initial configurations and the resulting gas and cluster morphology we find that all stellar clusters follow a very similar gas accretion behaviour. Once secondary protostars begin to form, the central region of a cluster is efficiently shielded from further accretion. Hence, objects located close to the centre are starved of material, as indicated by a strong decrease of the central acc retion rate. This Fragmentation Induced Starvation occurs not only in rotationally supported discs and filaments, but also in more spherically symmetric clusters with complex chaotic motions., Comment: 15 pages, MNRAS, in press, small changes (referee's suggestions and comments)

We present a detailed parameter study of collapsing turbulent cloud cores, varying the initial density profile and the initial turbulent velocity field. We systematically investigate the influence of different initial conditions on the star formation process, mainly focusing on the fragmentation, the number of formed stars, and the resulting mass distributions. Our study compares four different density profiles (uniform, Bonnor-Ebert type, $\rho\propto r^{-1.5}$, and $\rho\propto r^{-2}$), combined with six different supersonic turbulent velocity fields (compressive, mixed, and solenoidal, initialised with two different random seeds each) in three-dimensional simulations using the adaptive-mesh refinement, hydrodynamics code FLASH. The simulations show that density profiles with flat cores produce hundreds of low-mass stars, either distributed throughout the entire cloud or found in subclusters, depending on the initial turbulence. Concentrated density profiles always lead to the formation of one high-mass star in the centre of the cloud and, if at all, low-mass stars surrounding the central one. In uniform and Bonnor-Ebert type density distributions, compressive initial turbulence leads to local collapse about 25% earlier than solenoidal turbulence. However, central collapse in the steep power-law profiles is too fast for the turbulence to have any significant influence. We conclude that (I) the initial density profile and turbulence mainly determine the cloud evolution and the formation of clusters, (II) the initial mass function (IMF) is not universal for all setups, and (III) that massive stars are much less likely to form in flat density distributions. The IMFs obtained in the uniform and Bonnor-Ebert type density profiles are more consistent with the observed IMF, but shifted to lower masses., Comment: 20 pages, MNRAS in press