Search

We present the Stagger-grid, a comprehensive grid of time-dependent, 3D hydrodynamic model atmospheres for late-type stars with realistic treatment of radiative transfer, covering a wide range in stellar parameters. This grid of 3D models is intended for various applications like stellar spectroscopy, asteroseismology and the study of stellar convection. In this introductory paper, we describe the methods used for the computation of the grid and discuss the general properties of the 3D models as well as their temporal and spatial averages (<3D>). All our models were generated with the Stagger-code, using realistic input physics for the equation of state (EOS) and for continuous and line opacities. Our ~220 grid models range in Teff from 4000 to 7000K in steps of 500K, in log g from 1.5 to 5.0 in steps of 0.5 dex, and [Fe/H] from -4.0 to +0.5 in steps of 0.5 and 1.0 dex. We find a tight scaling relation between the vertical velocity and the surface entropy jump, which itself correlates with the constant entropy value of the adiabatic convection zone. The range in intensity contrast is enhanced at lower metallicity. The granule size correlates closely with the pressure scale height sampled at the depth of maximum velocity. We compare the <3D> models with widely applied 1D models, as well as with theoretical 1D hydrostatic models generated with the same EOS and opacity tables as the 3D models, in order to isolate the effects of using self-consistent and hydrodynamic modeling of convection, rather than the classical mixing length theory approach. For the first time, we are able to quantify systematically over a broad range of stellar parameters the uncertainties of 1D models arising from the simplified treatment of physics, in particular convective energy transport. In agreement with previous findings, we find that the differences can be significant, especially for metal-poor stars., Comment: Accepted for publication in A&A, 31 pages, 29 figures

We compare limb darkening laws derived from 3D hydrodynamical model atmospheres and 1D hydrostatic MARCS models for the host stars of the two transiting exoplanet systems HD 209458 and HD 189733. The surface brightness distribution of the stellar disks is calculated using 3D LTE spectrum formation and opacity sampling. We test our predictions using least-squares fits of model light curves to primary eclipses that were observed with the Hubble Space Telescope (HST). The limb darkening law derived from the 3D model of HD 209458 between 2900 A and 5700 A produces significantly better fits to the HST data, removing systematic residuals that were previously observed for model light curves based on 1D predictions. This difference arises mainly from the shallower mean temperature structure of the 3D model, which is a consequence of the explicit simulation of surface granulation. In the case of HD 189733, the model atmospheres produce practically equivalent limb darkening curves between 2900 A and 5700 A, partly due to obstruction by spectral lines, and the data are not sufficient to distinguish between the light curves. We also analyze HST observations between 5350 A and 10500 A for this star; the 3D model leads to a better fit compared to 1D predictions. The significant improvement of fit quality for the HD 209458 system demonstrates the higher degree of realism of 3D models and the importance of surface granulation for the formation of the atmospheric radiation field of late-type stars. This result agrees well with recent investigations of limb darkening in the solar continuum and other observational tests. The case of HD 189733 is no contradiction as the model light curves are less sensitive to the temperature stratification of the atmosphere and the observed data in the 2900 A - 5700 A region are not sufficient to distinguish more clearly between 3D and 1D limb darkening., Comment: To be published in Astronomy & Astrophysics (article accepted)

Radiative hydrodynamic simulations of solar and stellar surface convection have become an important tool for exploring the structure and gas dynamics in the envelopes and atmospheres of late-type stars and for improving our understanding of the formation of stellar spectra. We quantitatively compare results from three-dimensional, radiative hydrodynamic simulations of convection near the solar surface generated with three numerical codes CO5BOLD, MURaM, and STAGGER and different simulation setups in order to investigate the level of similarity and to cross-validate the simulations. For all three simulations, we considered the average stratifications of various quantities (temperature, pressure, flow velocity, etc.) on surfaces of constant geometrical or optical depth, as well as their temporal and spatial fluctuations. We also compared observables, such as the spatially resolved patterns of the emerging intensity and of the vertical velocity at the solar optical surface as well as the center-to-limb variation of the continuum intensity at various wavelengths. The depth profiles of the thermodynamical quantities and of the convective velocities as well as their spatial fluctuations agree quite well. Slight deviations can be understood in terms of differences in box size, spatial resolution and in the treatment of non-gray radiative transfer between the simulations. The results give confidence in the reliability of the results from comprehensive radiative hydrodynamic simulations., Comment: Astronomy & Astrophysics, in press

We investigate the effects of coherent isotropic continuum scattering on the formation of spectral lines in local thermodynamic equilibrium (LTE) using 3D hydrodynamical and 1D hydrostatic model atmospheres of red giant stars. Continuum flux levels, spectral line profiles and curves of growth for different species are compared with calculations that treat scattering as absorption. Photons may escape from deeper, hotter layers through scattering, resulting in significantly higher continuum flux levels beneath a wavelength of 5000 A. The magnitude of the effect is determined by the importance of scattering opacity with respect to absorption opacity; we observe the largest changes in continuum flux at the shortest wavelengths and lowest metallicities; intergranular lanes of 3D models are more strongly affected than granules. Continuum scattering acts to increase the profile depth of LTE lines: continua gain more brightness than line cores due to their larger thermalization depth in hotter layers. We thus observe the strongest changes in line depth for high-excitation species and ionized species, which contribute significantly to photon thermalization through their absorption opacity near the continuum optical surface. Scattering desaturates the line profiles, leading to larger abundance corrections for stronger lines, which reach -0.5 dex at 3000 A for Fe II lines in 3D with excitation potential 2 eV at [Fe/H]=-3.0. The corrections are less severe for low-excitation lines, longer wavelengths, and higher metallicity. Velocity fields increase the effects of scattering by separating emission from granules and intergranular lanes in wavelength. 1D calculations exhibit similar scattering abundance corrections for weak lines, but those for strong lines are generally smaller compared to 3D models and depend on the choice of microturbulence., Comment: Astronomy & Astrophysics, Volume 529, 05/2011

Three-dimensional (3D) radiative hydrodynamic model atmospheres of metal-poor late-type stars are characterized by cooler upper photospheric layers than their 1D counterparts. This property of 3D models can dramatically affect elemental abundances derived from temperature-sensitive spectral lines. We investigate whether the cool surface temperatures predicted by metal-poor 3D models can be ascribed to the approximated treatment of scattering in the radiative transfer. We use the Bifrost code to test three different ways to handle scattering in 3D model atmospheres of metal-poor stars. First, we solve self-consistently the radiative transfer equation for a source function with a coherent scattering term. Second, we solve the radiative transfer equation for a Planckian source function, neglecting the contribution of continuum scattering to extinction in the optically thin layers; this has been the default mode in previous models of ours. Third, we treat scattering as pure absorption everywhere, which is the standard case in CO5BOLD models. We find that the second approach produces temperature structures with cool upper photospheric layers very similar to the correct coherent scattering solution. In contrast, treating scattering as pure absorption leads to significantly hotter and shallower temperature stratifications. The main differences in temperature structure between our published models and those generated with the CO5BOLD code can be traced to the different treatments of scattering. Neglecting the contribution of continuum scattering to extinction in optically thin layers provides a good approximation to the full radiative transfer solution for metal-poor stars. Our results demonstrate that the cool temperature stratifications predicted for metal-poor late-type stellar atmospheres by previous models of ours are not an artifact of the approximated treatment of scattering., Comment: 12 pages, accepted for publication on A&A

We present the implementation of a radiative transfer solver with coherent scattering in the new BIFROST code for radiative magneto-hydrodynamical (MHD) simulations of stellar surface convection. The code is fully parallelized using MPI domain decomposition, which allows for large grid sizes and improved resolution of hydrodynamical structures. We apply the code to simulate the surface granulation in a solar-type star, ignoring magnetic fields, and investigate the importance of coherent scattering for the atmospheric structure. A scattering term is added to the radiative transfer equation, requiring an iterative computation of the radiation field. We use a short-characteristics-based Gauss-Seidel acceleration scheme to compute radiative flux divergences for the energy equation. The effects of coherent scattering are tested by comparing the temperature stratification of three 3D time-dependent hydrodynamical atmosphere models of a solar-type star: without scattering, with continuum scattering only, and with both continuum and line scattering. We show that continuum scattering does not have a significant impact on the photospheric temperature structure for a star like the Sun. Including scattering in line-blanketing, however, leads to a decrease of temperatures by about 350\,K below log tau < -4. The effect is opposite to that of 1D hydrostatic models in radiative equilibrium, where scattering reduces the cooling effect of strong LTE lines in the higher layers of the photosphere. Coherent line scattering also changes the temperature distribution in the high atmosphere, where we observe stronger fluctuations compared to a treatment of lines as true absorbers., Comment: A&A, in press

We report on a detailed abundance analysis of two strongly r-process enhanced, very metal-poor stars newly discovered in the HERES project, CS 29491-069 ([Fe/H]=-2.51, [r/Fe]=+1.1) and HE 1219-0312 ([Fe/H]=-2.96, [r/Fe]=+1.5). The analysis is based on high-quality VLT/UVES spectra and MARCS model atmospheres. We detect lines of 15 heavy elements in the spectrum of CS 29491-069, and 18 in HE 1219-0312; in both cases including the Th II 4019 {\AA} line. The heavy-element abundance patterns of these two stars are mostly well-matched to scaled solar residual abundances not formed by the s-process. We also compare the observed pattern with recent high-entropy wind (HEW) calculations, which assume core-collapse supernovae of massive stars as the astrophysical environment for the r-process, and find good agreement for most lanthanides. The abundance ratios of the lighter elements strontium, yttrium, and zirconium, which are presumably not formed by the main r-process, are reproduced well by the model. Radioactive dating for CS 29491-069 with the observed thorium and rare-earth element abundance pairs results in an average age of 9.5 Gyr, when based on solar r-process residuals, and 17.6 Gyr, when using HEW model predictions. Chronometry seems to fail in the case of HE 1219-0312, resulting in a negative age due to its high thorium abundance. HE 1219-0312 could therefore exhibit an overabundance of the heaviest elements, which is sometimes called an "actinide boost".

We present a preliminary local thermodynamic equilibrium (LTE) abundance analysis of the template halo red giant HD122563 based on a realistic, three-dimensional (3D), time-dependent, hydrodynamical model atmosphere of the very metal-poor star. We compare the results of the 3D analysis with the abundances derived by means of a standard LTE analysis based on a classical, 1D, hydrostatic model atmosphere of the star. Due to the different upper photospheric temperature stratifications predicted by 1D and 3D models, we find large, negative, 3D-1D LTE abundance differences for low-excitation OH and Fe I lines. We also find trends with lower excitation potential in the derived Fe LTE abundances from Fe I lines, in both the 1D and 3D analyses. Such trends may be attributed to the neglected departures from LTE in the spectral line formation calculations., Comment: 4 pages, 4 figures, contribution to proceedings for Joint Discussion 10 at the IAU General Assembly, Rio de Janeiro, Brazil, August 2009