Search

Wildland fire–atmosphere interaction generates complex turbulence patterns, organized across multiple scales, which inform fire-spread behaviour, firebrand transport, and smoke dispersion. Here, we utilize wavelet-based techniques to explore the characteristic temporal scales associated with coherent patterns in the measured temperature and the turbulent fluxes during a prescribed wind-driven (heading) surface fire beneath a forest canopy. We use temperature and velocity measurements from tower-mounted sonic anemometers at multiple heights. Patterns in the wavelet-based energy density of the measured temperature plotted on a time–frequency plane indicate the presence of fire-modulated ramp–cliff structures in the low-to-mid-frequency band (0.01–0.33 Hz), with mean ramp durations approximately 20% shorter and ramp slopes that are an order of magnitude higher compared to no-fire conditions. We then investigate heat- and momentum-flux events near the canopy top through a cross-wavelet coherence analysis. Briefly before the fire-front arrives at the tower base, momentum-flux events are relatively suppressed and turbulent fluxes are chiefly thermally-driven near the canopy top, owing to the tilting of the flame in the direction of the wind. Fire-induced heat-flux events comprising warm updrafts and cool downdrafts are coherent down to periods of a second, whereas ambient heat-flux events operate mainly at higher periods (above 17 s). Later, when the strongest temperature fluctuations are recorded near the surface, fire-induced heat-flux events occur intermittently at shorter scales and cool sweeps start being seen for periods ranging from 8 to 35 s near the canopy top, suggesting a diminishing influence of the flame and increasing background atmospheric variability thereat. The improved understanding of the characteristic time scales associated with fire-induced turbulence features, as the fire-front evolves, will help develop more reliable fire behaviour and scalar transport models.

Mesoscale-to-microscale coupling is an important tool for conducting turbulence-resolving multiscale simulations of realistic atmospheric flows, which are crucial for applications ranging from wind energy to wildfire spread studies. Different techniques are used to facilitate the development of realistic turbulence in the large-eddy simulation (LES) domain while minimizing computational cost. Here, we explore the impact of a simple and computationally efficient Stochastic Cell Perturbation method using momentum perturbation (SCPM-M) to accelerate turbulence generation in boundary-coupled LES simulations using the Weather Research and Forecasting model. We simulate a convective boundary layer (CBL) to characterize the production and dissipation of turbulent kinetic energy (TKE) and the variation of TKE budget terms. Furthermore, we evaluate the impact of applying momentum perturbations of three magnitudes below, up to, and above the CBL on the TKE budget terms. Momentum perturbations greatly reduce the fetch associated with turbulence generation. When applied to half the vertical extent of the boundary layer, momentum perturbations produce an adequate amount of turbulence. However, when applied above the CBL, additional structures are generated at the top of the CBL, near the inversion layer. The magnitudes of the TKE budgets produced by SCPM-M when applied at varying heights and with different perturbation amplitudes are always higher near the surface and inversion layer than those produced by No-SCPM, as are their contributions to the TKE. This study provides a better understanding of how SCPM-M reduces computational costs and how different budget terms contribute to TKE in a boundary-coupled LES simulation.

The intensity and frequency of wildfires in California (CA) have increased in recent years, causing significant damage to human health and property. In October 2007, a number of small fire events, collectively referred to as the Witch Creek Fire or Witch Fire started in Southern CA and intensified under strong Santa Ana winds. As a test of current mesoscale modeling capabilities, we use the Weather Research and Forecasting (WRF) model to simulate the 2007 wildfire event in terms of meteorological conditions. The main objectives of the present study are to investigate the impact of horizontal grid resolution and planetary boundary layer (PBL) scheme on the model simulation of meteorological conditions associated with a Mega fire. We evaluate the predictive capability of the WRF model to simulate key meteorological and fire-weather forecast parameters such as wind, moisture, and temperature. Results of this study suggest that more accurate predictions of temperature and wind speed relevant for better prediction of wildfire spread can be achieved by downscaling regional numerical weather prediction products to 1 km resolution. Furthermore, accurate prediction of near-surface conditions depends on the choice of the planetary boundary layer parameterization. The MYNN parameterization yields more accurate prediction as compared to the YSU parameterization. WRF simulations at 1 km resolution result in better predictions of temperature and wind speed than relative humidity during the 2007 Witch Fire. In summary, the MYNN PBL parameterization scheme with finer grid resolution simulations improves the prediction of near-surface meteorological conditions during a wildfire event.

This study 1) identifies the seasons and biomes that exhibit significant (1980-2019) changes in fire danger potential, as quantified by the Canadian Fire Weather Index (FWI); 2) explores what types of fire behavior potentials may be contributing to changes in fire danger potential, as quantified by the United States Energy Release Component (ERC) and the Ignition Component (IC); 3) provides spatiotemporal insight on how fire danger potential and fire behavior potential are responding in relation to changes in seasonal precipitation totals and seasonal mean air temperature across biomes. Time series of these fire potentials, as well as seasonal mean temperature, and seasonal precipitation totals are generated using data from the 0.25° ECMWF spatial resolution Reanalysis 5th Generation (ERA5) and the Climatic Research Unit gridded Time Series (CRU TS). The Mann-Kendall test is then applied to identify significant spatiotemporal trends across each biome. Results indicate that the September-November season (SON) exhibits the greatest rate of increase in fire danger potential, followed by the June-August season (JJA), December, January-February season (DJF), and March-May season (MAM), and this is predominant over the Tropical and Subtropical Moist Broadleaf Forest Biome, as well as all vegetation types of the temperate biomes. Similarly, the temperate biomes experience the greatest rate of increase in fire intensity potential and ignition potential, but prevalent during the DJF and MAM seasons. Furthermore, there is a significant positive correlation between fire danger potential and seasonal mean air temperature during JJA in the Northern Hemisphere for the temperate biomes in North America and Europe, as well as the Tropical and Subtropical biomes in Africa. Our analysis provides quantitative insight as to how fire danger potential and fire behavior potential have been responding to changes in seasonal mean temperature and seasonal precipitation totals across different ecoregions around the world.

Flood and debris hazards are heightened following wildfires, but are challenging to quantify due to interdependence between fire frequency and severity, runoff and sediment fluxes during storms, and sedimentation that reduces infrastructure capacity. Herein we present a stochastic simulation framework to estimate compound flood and debris hazards from sequences of wildfires and rainstorms and the accumulation of sediment within flood infrastructure. Application of the framework to a hypothetical watershed representative of southern California shows that the present-day compound hazard may be up to 6 times greater than the marginal hazard posed by peak flows in the absence of wildfire, and that future compound hazards could be up to 11 times greater than the marginal hazard based on future increases in wildfire frequency. Numerous sensitivities are investigated, including infrastructure design and maintenance, which are shown to be crucial for moderating future increases in post-fire flood hazards.

Prescribed (Rx) burns are conducted on days when the meteorological thresholds of maximum air temperature, relative humidity, and wind speeds are all met (burn window) in order to ensure safe Rx burn practices. Limited burn windows have been consistently identified as one of the most important constraints for conducting Rx burns in California. We investigate whether burn windows across California can be extended from the typical fall season to include other opportune seasons for facilitating specific management objectives. We quantify the seasonal Rx burn efficiencies by assessing the frequency and burned areas using an aggregate of Rx datasets, and we compute the seasonal spatiotemporal trends in the number of days the set of meteorological parameters are met over thirty-five years (1984 to 2019), using the gridMET 4 km dataset. Our results indicate that while fall burns are most frequently executed (40% of the time), the spring (and to a lesser extent winter) seasons yield efficient Rx burns similar to fall because greater acres are being consumed with less burns. In addition, winter and spring seasons experience burn window opportunities (70-90% of the time) over larger areas than the other seasons, and this is predominantly over forested regions in Northern California. Our results also indicate that burn windows in the winter and spring are decreasing at a rate of one day per year over a larger spatial area than that of summer and fall. This decrease is primarily driven by changes in the number of days the relative humidity thresholds are met. Policymakers recognize the critical importance that Rx burns have on a multitude of ecosystem restoration factors, fire behavior dynamics, and firefighter safety. Therefore, there is a need to capitalize on these additional burn windows before these opportunities become less feasible in the future.

The atmospheric boundary layer mediates the exchange of energy, matter, and momentum between the land surface and the free troposphere, integrating a range of physical, chemical, and biological processes and is defined as the lowest layer of the atmosphere (ranging from a few meters to 3 km). In this review, we investigate how continuous, automated observations of the atmospheric boundary layer can enhance the scientific value of co-located eddy covariance measurements of land-atmosphere fluxes of carbon, water, and energy, as are being made at FLUXNET sites worldwide. We highlight four key opportunities to integrate tower-based flux measurements with continuous, long-term atmospheric boundary layer measurements: (1) to interpret surface flux and atmospheric boundary layer exchange dynamics and feedbacks at flux tower sites, (2) to support flux footprint modelling, the interpretation of surface fluxes in heterogeneous and mountainous terrain, and quality control of eddy covariance flux measurements, (3) to support regional-scale modeling and upscaling of surface fluxes to continental scales, and (4) to quantify land-atmosphere coupling and validate its representation in Earth system models. Adding a suite of atmospheric boundary layer measurements to eddy covariance flux tower sites, and supporting the sharing of these data to tower networks, would allow the Earth science community to address new emerging research questions, better interpret ongoing flux tower measurements, and would present novel opportunities for collaborations between FLUXNET scientists and atmospheric and remote sensing scientists.

Mesoscale-to-Large Eddy Simulation (LES) grid nesting is an important tool for many atmospheric model applications, ranging from wind energy to wildfire spread studies. Different techniques are used in such applications to accelerate the development of turbulence in the LES domain. Here, we explore the impact of a simple and computationally efficient Stochastic Cell Perturbation method (SCPM) to accelerate the generation of turbulence in the Weather Research and Forecasting (WRF) LES model on the Turbulence Kinetic Energy (TKE) budget. In a convective boundary layer, we study the variation of TKE budget terms under the initial conditions of the Scaled Wind Farm Technology (SWiFT) facility located in West Texas. In this study, WRF LES is used with a horizontal grid resolution of 12 m, and is one-way nested within an idealized mesoscale domain. It is crucial to understand how forced perturbation shifts the balance between the terms of the TKE budget. Here, we quantify the shear production, and buoyant production in an unstable case. Since additional production terms are introduced in the SCPM method, we investigate the dissipation term of TKE. In addition, we also study the generation of turbulent transport. Generally, it integrates over height to null in a planar homogeneous case without subsidence, indicating it is positive over some heights and negative over other heights. Furthermore, we also study the variation of the TKE transport term after extending the random perturbation up to a certain height. The findings of this study will provide a better understanding of the contribution of different budget terms in a forced LES simulation.

The vertical turbulent transfer of heat and momentum in the lower atmospheric boundary layer is accom-plished through intermittent sweep, ejection, outward interaction, and inward interaction events associated with turbulent updrafts and downdrafts. These events, collectively referred to as sweep–ejection dynamics, have been studied extensively in forested and nonforested environments and reported in the literature. However, little is known about the sweep–ejection dynamics that occur in response to turbulence regimes induced by wildland fires in forested and nonforested environments. This study attempts to fill some of that knowledge gap through analyses of turbulence data previously collected during three wildland (prescribed) fires that occurred in grassland and forested environments in Texas and New Jersey. Tower-based high-frequency (10 or 20 Hz) three-dimensional wind-velocity and temperature measurements are used to examine fre-quencies of occurrence of sweep, ejection, outward interaction, and inward interaction events and their actual contributions to the mean vertical turbulent fluxes of heat and momentum before, during, and after the passage of fire fronts. The observational results suggest that wildland fires in these environments can substantially change the sweep–ejection dynamics for turbulent heat and momentum fluxes that typically occur when no fires are present, especially the relative contributions of sweeps versus ejections in determining overall heat and momentum fluxes.

Momentum and mass exchanges between the atmosphere and forests situated on complex terrain continue to draw significant research attention primarily because of their significance to a plethora of applications. In this paper, we investigated flows behavior on the leeward side of a two-dimensional forested ridge under neutrally stratified conditions using large-eddy simulations (LESs). The goal is to understand how variations in leaf area index (LAI), vertical canopy foliage distributions, and forest edge positions affect mean/turbulent flow statistics, momentum fluxes, and onset of recirculation patterns. Although pressure perturbations are dominated by the hill shape, it is demonstrated here that changes in canopy foliage distribution modulate intensities and patterns of the leeward adverse pressure gradients. Such changes in the adverse pressure gradients alter the mean velocity streamlines including the patterns and magnitudes of the leeward downward mean vertical velocity and the velocity variances and momentum flux in the wake region. While a downwind recirculation zone develops in all cases, the details regarding the incipient location and recirculation zone size vary including positions of the separation and reattachment points. Furthermore, changes in the strength and depth of the zone occur due to canopy-induced changes in adverse pressure gradients, advection, and canopy drag. Because the recirculation zone impacts the local mean advective terms in momentum and scalar exchanges, the simulations here indicate that canopy morphology-induced changes in the leeward flows have significant implications to both measurements and models of biosphere-atmosphere exchange over complex terrain.

Wildfire behavior is dictated by the complex interaction of numerous physical phenomena including dynamic ambient and fire-induced winds, heat transfer, aerodynamic drag on the wind by the fuel and combustion. These phenomena create complex feedback effects between the fire and its surroundings. In this study, we aim to study the mechanisms by which buoyant flame dynamics along with vortical motions and instabilities control wildfire propagation. Specifically, this study employs a suite of simulations conducted with the physics-based coupled fire-atmosphere behavior model (FIRETEC). The simulations are initialized with a fire line and the fires are allowed to propagate on a grass bed, where the fuel heights and wind conditions are varied systematically. Flow variables are extracted to identify the characteristics of the alternating counter-rotational vortices, called towers and troughs, that drive convective heat transfer and fire spread. These vortices have previously been observed in wildfires and laboratory fires, and have also been observed to arise spontaneously in FIRETEC due to the fundamental physics incorporated in the model. However, these past observations have been qualitative in nature and no quantitative studies can be found in the literature which connected these coherent structures fundamental to fire behavior with the constitutive flow variables. To that end, a variety of state variables are examined in the context of these coherent structures under various wind profile and grass height conditions. Identification of various correlated signatures and fire-atmosphere feedbacks in simulations provides a hypothesis that can be tested in future observational or experimental efforts, potentially assisting experimental design, and can aid in the interpretation of data from in situ detectors.

We investigate the effects of an isolated meso-γ-scale surface heterogeneity for roughness and albedo on the atmospheric boundary-layer (ABL) height, with a case study at a semi-arid forest surrounded by sparse shrubland (forest area: 28km2, forest length in the main wind direction: 7 km). Doppler lidar and ceilometer measurements at this semi-arid forest show an increase in the ABL height over the forest compared with the shrubland on four out of eight days. The differences in the ABL height between shrubland and forest are explained for all days with a model that assumes a linear growth of the internal boundary layer of the forest through the convective ABL upwind of the forest followed by a square-root growth into the stable free atmosphere. For the environmental conditions that existed during our measurements, the increase in ABL height due to large sensible heat fluxes from the forest (600Wm-2 in summer) is subdued by stable stratification in the free atmosphere above the ABL, or reduced by high wind speeds in the mixed layer.