Search

Thermo-optical and magneto-optical characteristics of a uniaxial CeF3 crystal have been investigated. Its optical anisotropy parameter, magneto-optical figure of merit, and the ratio of the thermo-optical constants P and Q have been measured. The found characteristics have been compared with the corresponding values for the TGG crystal. Based on the obtained results it has been concluded that, despite its anisotropy, the CeF3 crystal is promising material for the development of Faraday isolators for high-power lasers.

As a new bonding technique for high-power laser optics, pulsed electric current bonding (PECB) of sapphire and Nd:YAG ceramics was demonstrated. The optical properties of the composite were measured, and its microstructure at the interface and laser performance was analyzed. The optical transmittance was equal to the theoretical value, and the transmitted wavefront was λ/3 (λ=633 nm); both are appropriate values for laser applications. The microstructural analysis indicated an absence of scattering sources such as pores or non-contact points at the sapphire/Nd:YAG interface, and the distance of yttrium diffusion into the sapphire was theoretically expected to be less than 10 nm, much smaller than that of ceramic materials bonded by conventional thermal diffusion techniques. The laser performance of the composite material showed an 18% higher output power with almost the same threshold power and slope efficiency as a Nd:YAG ceramic due to the sapphire-conductive cooling effect. This new PECB technique for different transparent materials has the potential to bond large aperture optical materials over 100 mm in diameter and could be especially effective for fabricating active laser media for high-average-power lasers having both high-pulse energy and high repetition rates.

Faraday effect measurements of holmium oxide (Ho2O3) ceramics-based magneto-optical materials, highly potential material candidates for high-energy laser Faraday isolators, are presented in this paper. Temperature dependence of the Verdet constant of nondoped Ho2O3 ceramics was measured for temperatures 15–305 K at $1.064~\unicode[STIX]{x03BC}\text{m}$ wavelength. The Verdet constant dispersion for wavelengths 0.5–$1~\unicode[STIX]{x03BC}\text{m}$ and $1.064~\unicode[STIX]{x03BC}\text{m}$ was measured for both nondoped Ho2O3 ceramics and Ho2O3 ceramics doped with terbium Tb3+ (0.2 at. %) and cerium Ce3+ (0.1 at. %) ions. The results suggest that the relatively low level of doping of Ho2O3 with these ions has no significant boosting impact on the Faraday effect. Therefore, other compositions of Ho2O3 ceramics-based magneto-optical materials, as well as various doping concentrations, should be further examined.

The thermally induced depolarization and Verdet constant of CeFsub3/subcrystals-their most important characteristics-have been studied in the 79-293 K temperature range. It has been found that thermal effects reduce substantially upon cooling down to 79 K and the Verdet constant grows in inverse proportion to the temperature. It was shown that CeFsub3/subcrystals are not inferior to TGG as a medium for Faraday isolators, including cryogenic ones.

A monolithic composite ceramic with multi total-reflection active-mirrors has been proposed as a repeatable amplifier in diode pump for joule-class pulse energy. The new amplifier was designed under both experimental and theoretical researches with a single total-reflection active-mirror amplifier.

A total-reflection active-mirror (TRAM) amplifier is functionally designed by using a composite ceramic for high pulse energy and high average power. A chirped-pulse regenerative amplifier with a cryogenic TRAM has been successfully demonstrated as a feasibility study. A 3.5 mJ pulse energy is obtained at a repetition rate of 100 Hz. The corresponding energy fluence on the TRAM is as high as 1.5 J/cm2 for 0.46 ns short pulses. The M2-factor is below 1.1 and no significant beam distortion is observed.

We have measured optical transmittance through germanium in the mid-infrared region at room temperature using the Osaka free-electron laser (FEL). In spite of the fact that germanium is transparent in the mid-infrared region, we observed strong suppression of optical transmission under high-intensity FEL excitation. We found that the observed suppression is due to optical absorption in germanium. To analyze the experimental results, we have calculated optical transmittance of germanium within Keldysh theory

The amplified spontaneous emission (ASE) and parasitic lasing (PL) effects in thin disk laser with an anti-ASE cap have been investigated in detail by measuring both time-resolved radiated intensity at longer axis of elliptical pump profile (dominant ASE direction) and small signal gain (SSG) in laser amplifier. A cryogenically-cooled total-reflection active-mirror laser consisting of 9.8 at.% doped, 0.6-mm thick Yb:YAG and un-doped YAG trapezoidal ceramics cap was used as a sample. The phased transitions from spontaneous emission (SE) to ASE and from ASE to PL have been unambiguously observed. For several pump beam diameters, the ASE gain parameter g(0)l(ASE) at ASE threshold was about 3, and the SSG coefficient was down to about 65% until PL started. To the best of our knowledge, this is the first quantitative characterization of the ASE/PL effects in the thin disk laser with an anti-ASE cap.

We investigate the effect of dispersion compensation on temporal characteristics in mode-locking by nonlinear polarization rotation in an ytterbium-doped fiber (YDF) oscillator with intracavity and external grating pairs. A short fixed length YDF was spliced with a longer single-mode fiber (SMF). Using experimentally measured dispersion characteristics of the YDF, SMF and cavity optics, we control the group velocity dispersion (GVD) and spectral broadening in a cavity by changing the SMF length. As a result, the oscillator generated 29.4-fs transform-limited wing-free pulses, which are to our knowledge the shortest and cleanest pulses achieved without the use of additional optics like a prism pair for high-order dispersion compensation. The results show that a precise balance of higher order terms of the GVD and self-phase modulation is essential for shortening pulse duration.

We have studied the amplification characteristics of a cryogenically cooled Yb³⁺:YAG total-reflection active-mirror (TRAM) ceramic laser including wavefront distortion, birefringence loss, small signal gain (SSG), and temperature rise for developing high-performance master oscillator power amplifier (MOPA) systems. A 0.6 mm thick Yb³⁺:YAG ceramic sample was used, and maximum pump intensity ~10 kW/cm² was reached. The transmitted wavefront was measured by using a Shack-Hartmann wavefront sensor, and we evaluated the thermal lens focal length and Strehl ratio for different pump conditions. We have also observed a butterfly-like leakage profile of thermally induced birefringence loss at the maximum pump intensity. From SSG measurements, we obtained moderate laser gain of G=3 for one bounce with a near aberration-free wavefront. Gain calculations, which included also temperature dependence of the emission cross section and reabsorption of Yb³⁺:YAG, were in good agreement with the experiments. These experimental results will be useful as benchmark data for numerical simulations of temperature distribution in TRAM and for designing multikilowatt-class high-performance MOPA systems.

The temperature dependence of the thermo-optic effect in cryogenically cooled Yb:YAG ceramics was evaluated by measuring the thermo-optic coefficient (the derivative of refractive index with respect to temperature, i.e., dn/dT), thermal expansion coefficient (α), and thermal conductivity (κ) between 70 and 300 K. These parameters significantly improved at low temperature. Observed values indicated that a laser gain medium cooled to 70 K can sustain a thermal load up to 20 times higher than that at 300 K, for comparable thermo-optic effects. To our best knowledge, this is the first quantitative evaluation of the improvement in thermo-optic characteristics of cryogenically cooled Yb:YAG ceramics.

We analyzed the output power characteristics of a cryogenically cooled Yb:YAG total-reflection active-mirror (TRAM) laser oscillator including the temperature dependence of the emission cross section and the reabsorption loss of the Yb:YAG TRAM. A CW multi-transverse mode oscillation of a 9.8 at.% doped 0.6 mm thick Yb:YAG ceramic TRAM was investigated for various pump spot sizes and compared with theoretical results. The Yb:YAG temperatures were inferred from the ratio between fluorescence intensities at 1022 nm and 1027 nm which varied significantly with temperature below 200 K. Output power calculations using evaluated temperatures were in good agreement with the experimental data measured between 77 and 200 K, and the output power suppression due to the temperature rise observed above ~140 K. To the best of our knowledge, this is the first evaluation of output power for a cryogenically cooled Yb:YAG TRAM laser.

We report on a novel amplifier configuration concept for a 10 kW laser system using a zig-zag optical path based on a cryogenic Yb:YAG Total-Reflection Active-Mirror (TRAM) laser. The laser material is a compact composite ceramic, in which three Yb:YAG TRAMs are combined in series to increase the output power. Output powers of up to 214 W with a slope efficiency of 63% have been demonstrated for CW operation, even at a quite low pump intensity of less than 170 W/cm2. Further scaling could achieve output powers of more than 10 kW.

An efficient high-power laser operation has been demonstrated by using a cryogenic Yb:YAG composite ceramic with a total-reflection active-mirror arrangement. The composite ceramic, which had no high-reflection coating and was cooled with liquid nitrogen directly, showed four-level operation even at 67 kW/cm(3) of high pump density. A 273 W cw output power was obtained with 65% optical efficiency and 72% slope efficiency.

We propose a simple coherent beam combining technique for applications in high-power multichannel laser amplifier systems with tiled aperture design. Using a photodiode pair coupled with piezo-actuator mirrors, we demonstrated robust beam combining bandwidth (∼1 KHz) and root mean-square deviation (∼λ/25) for two beam channels. We estimate that the performance of this technique can be further enhanced in terms of operational bandwidth and phase locking accuracy. It is not limited by single beam power or channel number restrictions, does not require optical phase retrieval algorithms, or calibrations, and can be integrated into various master oscillator power amplifier architectures.