Search

Anisotropic growth of two-dimensional (2D) tungsten disulfide (WS2) crystals occurs during atomic layer deposition (ALD) from WS2 seeds at predetermined locations on large area dielectric substrates. The number of ALD reaction cycles determines the lateral dimensions of the WS2 crystals. This 2D synthesis approach is compatible with temperature sensitive structures due to the low deposition temperature and can be extended to other 2D materials and heterostructures thereof. The crystallinity of the seed and the selectivity of ALD precursors toward seeds and underlying starting surface affect the structural quality of the 2D crystals. [ABSTRACT FROM AUTHOR]

The structure, crystallinity and properties of as-deposited two-dimensional (2D) transition metal dichalcogenides are determined by nucleation mechanisms in the deposition process. 2D materials grown by atomic layer deposition (ALD) in the absence of a template are polycrystalline or amorphous. Little is known about their nucleation mechanisms. Therefore, the nucleation behavior of WS2 during plasma enhanced ALD from WF6, H2 plasma and H2S at 300 °C is investigated on amorphous ALD Al2O3 starting surface and on monocrystalline, bulk sapphire. Preferential interaction of the precursors with the Al2O3 starting surface promotes fast closure of the WS2 layer. The WS2 layers are fully continuous at WS2 content corresponding to only 1.2 WS2 monolayers. On amorphous Al2O3, (0002) textured and polycrystalline WS2 layers form with grain size of 5 to 20 nm due to high nucleation density (∼1014 nuclei/cm2). The WS2 growth mode changes from 2D (layer-by-layer) growth on the initial Al2O3 surface to three-dimensional (Volmer-Weber) growth after WS2 layer closure. Further growth proceeds from both WS2 basal planes in register with the underlying WS2 grain and from or over grain boundaries of the underlying WS2 layer with different in-plane orientation. In contrast, on monocrystalline sapphire, WS2 crystal grains can locally align along a preferred in-plane orientation. Epitaxial seeding occurs locally albeit a large portion of crystals remain randomly oriented, presumably due to the low deposition temperature. The WS2 sheet resistance is 168 MΩμm, suggesting that charge transport in the WS2 layers is limited by grain boundaries. [ABSTRACT FROM AUTHOR]

The process characteristics, the surface chemistry, and the resulting film properties of Ru deposited by atomic layer deposition from (ethylbenzyl)(1-ethyl-1,4-cyclohexadienyl)Ru(0) (EBECHRu) and O2 are discussed. The surface chemistry was characterized by both combustion reactions as well as EBECHRu surface reactions by ligand release. The process behavior on TiN starting surfaces at 325 °C was strongly influenced by Ti(O,N)x segregation on the growing Ru surface with consequences for both the growth per cycle as well as the film properties. For optimized process conditions, the films showed high purity with low C and O concentrations of the order of 1020 at./cm3. Higher deposition temperature led to strong (001) fiber texture of the films on SiO2 starting surfaces. Annealing in forming gas improved the crystallinity and led to resistivity values as low as 11 μΩcm for Ru films with a thickness of 10 nm. [ABSTRACT FROM AUTHOR]

Thethermal chemistry of methylcyclopentadienyl manganese tricarbonyl(MeCpMn(CO)3) on silicon oxide surfaces was characterizedby a combination of analytical techniques, including gas chromatography/massspectrometry (GC–MS), temperature-programmed desorption (TPD),infrared absorption spectroscopy, and X-ray photoelectron spectroscopy(XPS). The compound was found to be fairly stable, but to be ableto dissociatively chemisorb on the surface via the loss of one ormore carbonyl ligands followed by the oxidative addition of a surfacesilanol group. Further activation leads to the loss of the aromaticligand, at temperatures above approximately 575 K. This takes placeprimarily via the addition of a hydrogen atom to the MeCp ligand toform methylcyclopentadiene, which is released to the gas phase, buta small competing channel starts at slightly lower temperatures thatyields fulvene, and/or possibly benzene, after molecular rearrangement.The clean nature of the chemistry seen here for the methylcyclopentadienylMn complex makes it a good candidate as a precursor in the chemicaldeposition of metal thin films. However, the high stability and thehigh temperatures required for its decomposition do introduce somelimitations. [ABSTRACT FROM AUTHOR]