Search

A new glass with a composition of 40P2O5-30ZnO-20LiCl-10BaF2 (in mol%), doped with 3.5Nd2O3-3.5Yb2O3, was fabricated by the quenching melt technique. The luminescence (PL) and gamma spectroscopy of the glass were investigated systematically. The spectroscopic parameters of the prepared glass, such as the optical energy gap, Judd–Ofelt parameters Ωk (where k = 2, 4 and 6), lifetimes and branching ratio of the Nd3+/Yb3+ level, were evaluated. Moreover, the shielding parameters, such as the linear and mass attenuation coefficients, mean free path and half-value layer, were evaluated. The prepared glass had a spectroscopic quality factor (Ω4/Ω6) of 0.84, which is about three-times larger than that of the most standard laser host, Nd3+:YAG. The energy of the 2P1/2 (Nd3+) level (~23,250 cm−1) was twice the energy of the Yb3+ transition (~10,290 cm−1). The value of the emission cross section ( σ e m (λ) ) of Nd3+:4F3/2→4I9/2 and Yb3+:2F5/2→2F7/2 were 2.23 × 10−24 cm2 and 2.88 × 10−24 cm2, respectively. The fabricated glass had a high emission cross section and low mean free path parameters, which makes the fabricated glass a potential candidate for multifunctional applications, such as laser emissions for medical purposes. [ABSTRACT FROM AUTHOR]

In this study, the X-ray and gamma attenuation characteristics and optical properties of a synthesized tellurite–phosphate–sodium oxide glass system with a composition of (85 − x)TeO2–10P2O5–xNa2O mol% (where x = 15, 20, and 25) were evaluated. The glass systems we re fabricated by our research group using quenching melt fabrication. The shielding parameters of as-synthesized systems, such as the mass attenuation coefficient (MAC), linear attenuation coefficient (LAC), effective atomic number (Zeff), half-value layer (HVL), tenth value layer (TVL), mean free path (MFP), and effective electron density (Neff) in a wide energy range between 15 keV and 15 MeV, were estimated using well-known PHY-X/PSD software and recently developed MIKE software. Herein, the optical parameters of prepared glasses, such as molar volume (VM), oxygen molar volume (VO), oxygen packing density (OPD), molar polarizability ( α m ), molar refractivity (Rm), reflection loss (RL), and metallization (M), were estimated using MIKE software. Furthermore, the shielding performance of the prepared glasses was compared with that of commonly used standard glass shielding materials. The results show that the incorporation of sodium oxide into the matrix TeO2/P2O5 with an optimum concentration can yield a glass system with good shielding performance as well as good optical and physical properties, especially at low photon energy. [ABSTRACT FROM AUTHOR]

The synthesized glass system with a composition of (80-x) TeO2-10P2O5-10Nb2O5-xKCl mol% (where x = 5, 10, 15, 20, and 25) was successfully fabricated. The density (ρ) and molar volume (Vm) have been calculated. The investigated glasses were characterized using different analysis methods (differential thermal analysis (DTA) and UV-VIS-NIR spectroscopy). The radiation shielding effectiveness of the synthesized glass system was evaluated using different shielding parameters, such as mass and linear attenuation coefficients (MAC, LAC), half-value layer (HVL), mean free path (MFP), effective atomic number (Zeff), and effective electron number (Neff). The results showed that with the increasing potassium chloride (KCl) concentration and decreasing tellurium oxide (TeO2) concentration, the density, refractive index, Urbach energy (Eu), and glass transition temperature (Tg) decreased, while the optical energy gap (Eopt) and thermal stability increased. As the KCl concentration increases, the values of MAC, LAC, and Zeff increase in the following order: TPNK5 % > TPNK10 % > TPNK15 % > TPNK20 % > TPNK25 %. Additionally, the shielding effectiveness of TPNK glass system showed good performance compared with some standard materials. The synthesized glass with a minimum KCl content has both good shielding effectiveness and good optical properties, in addition to reasonable thermal stability, which makes it suitable for shielding and optical applications. [ABSTRACT FROM AUTHOR]

Shielding glass materials doped with heavy metal oxides show an improvement in the effectiveness of the materials used in radiation shielding. In this work, the photon shielding parameters of six tellurite glass systems doped with several metal oxides namely, 70TeO2-10P2O5- 10ZnO- 5.0PbF2- 0.0024Er2O3- 5.0X (where X represents different doped metail oxides namely, Nb2O5, TiO2, WO3, PbO, Bi2O3, and CdO) in a broad energy spectrum, ranging from 0.015 MeV to 15 MeV, were evaluated. The shielding parameters were calculated using the online software Phy-X/PSD. The highest linear and mass attenuation coefficients recorded were obtaibed from the samples containing bismuth oxide (Bi2O3), and the lowest half-value layer and mean free path were recorded among the other samples. Furthermore, the shielding effectiveness of tellurite glass systems was compared with commercial shielding materials (RS-369, RS-253 G18, chromite, ferrite, magnetite, and barite). The optical parameters viz, dispersion energy, single-oscillator energy, molar refraction, electronic polarizability, non-linear refractive indices, n2, and third-order susceptibility were measured and reported at a different wavelength. Bi2O3 has a strong effect on enhancing the optical and shielding properties. The outcome of this study suggests the potential of using the proposed glass samples as radiation-shielding materials for a broad range of imaging and therapeutic applications. [ABSTRACT FROM AUTHOR]

BACKGROUND: Metal oxide glass composites have attracted huge interest as promising shielding materials to replace toxic, heavy, and costly conventional shielding materials. OBJECTIVE: In this work, we evaluate shielding effectiveness of four novel tellurite-based glasses samples doped with oxide metals (namely, A, B, C, and D, which are 75TeO2- 10P2O5- 10ZnO- 5PbF2- 0.24Er2O3 ; 70TeO2- 10P2O5- 10ZnO- 5PbF2 -5MgO- 0.24Er2O3; 70TeO2- 10P2O5- 10ZnO- 5PbF2- 5BaO- 0.24Er2O3 ; and 70TeO2- 10P2O5-10ZnO- 5PbF2- 5SrO; respectively) by assessing them through a wide range of ionizing radiation energies (0.015–15 MeV). METHODS: The radiation-shielding parameters including mass attenuation coefficient (MAC), linear attenuation coefficient (LAC), half-value layer (HVL), mean free path, (MFP), effective atomic number (Zeff), effective electron number (Neff), and the transmission factor are computed in the selected range of ionizing radiation energies. Furthermore, the proposed samples were compared with the most common shielding glass materials. The optical parameters viz oscillator, dispersion energy, nonlinear refractive indices, molar, and electronic polarizability of these transparent glasses are reported at different wavelengths. RESULTS: The results show that the proposed samples have considerable effectiveness as transparent shielding glass materials at various ionizing radiation energies. They can be employed for effective radiation-protection outcomes. Sample C demonstrated slightly better shielding properties than the other samples with differences of 1.33%, 4.6%, and 4.2% for samples A, B, and D, respectively. A similar trend is observed regarding the mass attenuation coefficients. Nevertheless, sample B shows better optical properties than the other prepared glass samples. CONCLUSIONS: Our findings indicate that the proposed novel glass samples have good shielding properties and optical characteristics, which can pave the way for their utilization as transparent radiation-shielding materials in medical and industrial applications. [ABSTRACT FROM AUTHOR]