Search

This paper presents a new power electronic topology for a STATCOM allowing the generation of multilevel AC voltages. This topology is characterized by a modular configuration since it uses two well known four-leg two-level voltage source inverters. A Scott transformer with multiple secondary windings connects the two four-leg inverters to the grid. One of the important features of the proposed power topology is the capability to generate AC voltages with high number of levels, in spite of using only two four-leg two-level voltage source inverters. To maximize the number of voltage levels a geometric progression ratio of 3 between the windings of the transformers connected in cascade is proposed. However, to reduce the turns-ratio span, alternatively a fractional geometric ratio of 1.5 is also proposed and analyzed. A control strategy adapted to the proposed power converter topology is also presented. Besides the control of the reactive power the regulation of the four-leg inverter DC voltage will also be considered. To support the theoretical studies and assumptions, simulations and experiments are presented. Experimental results were obtained using a low power laboratory prototype. The results shown give evidence to the characteristics and features of the proposed power converter topology and control system. [ABSTRACT FROM AUTHOR]

In this paper, a static synchronous compensator (STATCOM) is proposed in which a new modular structure with conventional three-phase voltage source inverters is used to multilevel operation. The inverters are connected to a transformer in an open-end winding configuration and with three independent DC links. In this structure, the inverters will be connected in a cascade configuration. Besides the multilevel operation, the system is also characterized by low required blocking voltages for switch ratings, since the proposed STATCOM can apply the double of the DC capacitor voltage to the transformer windings. The development of the control system for the proposed topology is also presented. The operation of the proposed topology and the performance of the developed control system will be tested through several simulation and experimental tests. [ABSTRACT FROM AUTHOR]