15 results on '"Lin, Chih‐Hong"'
Search Results
2. RETRACTED ARTICLE: Integral Backstepping Control of LPMSM Drive System Using Revised Recurrent Fuzzy NN and Mended Particle Swarm Optimization
- Author
-
Lin, Chih-Hong
- Published
- 2020
- Full Text
- View/download PDF
3. RETRACTED ARTICLE: Nonlinear backstepping control design of LSM drive system using adaptive modified recurrent Laguerre orthogonal polynomial neural network
- Author
-
Lin, Chih-Hong
- Published
- 2017
- Full Text
- View/download PDF
4. Integral backstepping control with RRFNN and MPSO of LPMSM drive system.
- Author
-
Lin, Chih-Hong
- Abstract
A linear permanent magnet synchronous motor drive system is existed in many nonlinear effects such as the external load force, the flux saturation, the cogging force, the column friction and Stribeck force, and the parameters variations. Due to the uncertainty effects, the linear permanent magnet synchronous motor drive system is hard to achieve the good control performance by using linear controller. To raise robustness under occurrence of uncertainty, the integral backstepping control system with hitting function is first proposed for controlling the linear permanent magnet synchronous motor drive system. The used integrator can ameliorate the system's robustness under the parameters uncertainties and external force disturbances. To reduce vibration of control strength, the integral backstepping control system by means of the revised recurrent fuzzy neural network with mended particle swarm optimization is next proposed to operate the linear permanent magnet synchronous motor drive system to raise robustness of system. Furthermore, four variable learning rates in the weights of the revised recurrent fuzzy neural network are adopted by using mended particle swarm optimization to speed up parameter's convergence. Finally, comparative performances through some experimental upshots are verified that the integral backstepping control system by means of revised recurrent fuzzy neural network with mended particle swarm optimization has better control performances than those of the proposed methods for the linear permanent magnet synchronous motor drive system. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
5. Smart backstepping control using revised recurrent fuzzy neural network and revised ant colony optimization for linear permanent magnet synchronous motor drive system.
- Author
-
Lin, Chih-Hong and Chang, Kuo-Tsai
- Subjects
- *
PERMANENT magnet motors , *FUZZY neural networks , *RECURRENT neural networks , *ADAPTIVE control systems , *SYNCHRONOUS electric motors , *LINEAR control systems , *LYAPUNOV stability , *LYAPUNOV functions - Abstract
Because of the uncertainty's action in a linear permanent magnet synchronous motor drive system such as the external load force, the cogging force, the column friction force and the Stribeck effect force and the parameters variations, it is difficult to reach specific control performances by using the existing linear controller. To raise robustness under occurrence of parameters uncertainties and external force disturbances, the smart backstepping control system with three adaptive laws is proposed for controlling the linear permanent magnet synchronous motor drive system. In accordance with the Lyapunov function, three adaptive laws are derived to ameliorate the system's robustness. Furthermore, the smart backstepping control system using revised recurrent fuzzy neural network and revised ant colony optimization with the compensated controller is proposed to improve the control performance. The revised recurrent fuzzy neural network acts as the estimator of the uncertainty's disturbances. In addition, the compensated controller with error estimation law is proposed to compensate the minimum rebuilt error. Moreover, two learning rates of the weights in the revised recurrent fuzzy neural network are derived according to the discrete-type Lyapunov stability to assure convergence of the output tracking error and are adopted by using the revised ant colony optimization to speed-up parameter's convergence. Finally, some comparative performances are verified through some tentative upshots that the smart backstepping control system by virtue of revised recurrent fuzzy neural network and revised ant colony optimization with the compensated controller results in better control performances for the linear permanent magnet synchronous motor drive system. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
6. Clever backstepping control using two adaptive laws, a RRFNN and a compensated controller of SPCRIM drive system.
- Author
-
Lin, Chih-Hong
- Subjects
- *
FUZZY neural networks , *RECURRENT neural networks , *PARTICLE swarm optimization , *INDUCTION machinery , *COULOMB friction - Abstract
A six phase copper rotor induction motor (SPCRIM) drive system still exists in lots of nonlinear characteristics such as the added load torque, the Stribeck effect torque, the the cogging torque, the coulomb friction torque and the parameters variations. Due to some uncertainties effects, the using linear controller can not achieve better control performance for the SPCRIM drive system. To obtain better performance, a clever backstepping control system using two adaptive laws and a hitting function is proposed for controlling the SPCRIM drive system. To improve larger chattering phenomenon under uncertainties affects for aforementioned control system, the clever backstepping control system using two adaptive laws, a revised recurrent fuzzy neural network (RRFNN) and a compensated controller is proposed to estimate the required lumped uncertainty and to compensate the minimum reconstructed error of the estimated law. Furthermore, the corrected particle swarm optimization (CPSO) algorithm by using variable dynamic inertia weight and variable dynamic constriction factor with segment regulation mechanics that is the innovativeness for using the CPSO algorithm is adopted to regulate four variable learning rates of the weights in the RRFNN to speed-up parameter's convergence. Finally, comparative performances through some experimental results are verified that the clever backstepping control system using two adaptive laws, a RRFNN and a compensated controller has better control performances than those of the proposed methods for the SPCRIM drive system. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
7. Integral Backstepping Control of LPMSM Drive System Using Revised Recurrent Fuzzy NN and Mended Particle Swarm Optimization.
- Author
-
Lin, Chih-Hong
- Subjects
PARTICLE swarm optimization ,LYAPUNOV functions ,PARAMETER estimation ,LYAPUNOV stability ,ROBUST control - Abstract
A linear permanent magnet synchronous motor (LPMSM) drive system is keeping in many nonlinear effects such as the external load force, the flux saturation, the cogging force, the column friction and Stribeck force, and the parameters variations. Due to the uncertainty effects the existing linear controllers can not achieve better control performances for the LPMSM drive system. To raise robustness under occurrence of uncertainty, the integral backstepping control system with hitting function is proposed for controlling the LPMSM drive system in accordance with the Lyapunov function. To improve larger chattering phenomenon under uncertainties effects, the integral backstepping control system with revised recurrent fuzzy neural network (RRFNN) and mended particle swarm optimization (MPSO) is proposed to operate the LPMSM drive system to raise robustness of system. The RRFNN is used to estimate the value of the external lumped force uncertainty. Moreover, the error compensation control with the error compensation mechanism is proposed to compensate the minimum reconstructed error of the error estimation law. Besides, four variable learning rates in the weights of the RRFNN are regulated by virtue of MPSO with segment regulation to speed-up parameter's convergence. Finally, comparative performances through some tentative upshots are verified that the integral backstepping control system by virtue of RRFNN with MPSO has better control performances than those of the proposed methods for the LPMSM drive system. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
8. SCRIM drive system using adaptive backstepping control and mended recurrent Romanovski polynomials neural network with reformed particle swarm optimization.
- Author
-
Lin, Chih‐Hong and Chang, Kuo‐Tsai
- Subjects
- *
TRACKING control systems , *PARTICLE swarm optimization , *ADAPTIVE control systems , *ARTIFICIAL neural networks , *INDUCTION machinery , *POLYNOMIALS , *PERMANENT magnet motors - Abstract
Summary: Due to air‐gap field harmonic, cogging torque, stator's current time harmonic, and the influence of flux saturation, a six‐phase copper rotor induction motor (SCRIM) drive system has highly nonlinear uncertainties. Thus, the linear control method for the SCRIM drive system is difficult to achieved good performance under the nonlinear uncertainty action. To obtain better control performance, the adaptive backstepping control system using switching function is firstly proposed for controlling the SCRIM drive system to overcome the uncertainty influence. With the proposed control system, the SCRIM drive system holds in robustness to these uncertainties for the tracking of periodic reference trajectories. To enhance the robustness of the SCRIM drive system, the adaptive backstepping control system using adaptive law is proposed for estimating the required lumped uncertainty to reduce chattering phenomenon. When the inertia of the counterweight is varying, this proposed method can perform well in general situations but cannot get a satisfactory performance. The adaptive backstepping control system using mended recurrent Romanovski polynomials neural network with reformed particle swarm optimization (PSO) is thus proposed to estimate the lumped uncertainty and to compensate estimated error for obtaining better control performance. Furthermore, two variable learning rates of the weights in the mended recurrent Romanovski polynomials neural network are adopted by using reformed PSO to speed up parameter's convergence. Finally, some experimental results with comparative control performances are demonstrated, and then, the effectiveness of proposed control system with better control performance is verified for the position tracking of periodic reference inputs. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
9. Backstepping control and revamped recurrent fuzzy neural network with mended ant colony optimization applied in SCRIM drive system.
- Author
-
Lin, Chih-Hong
- Subjects
- *
FUZZY neural networks , *RECURRENT neural networks , *ANT algorithms , *INDUCTION machinery - Abstract
A six-phase copper rotor induction motor (SCRIM) drive system causes a lot of nonlinear effects such as nonlinear uncertainties. To obtain better performance, the backstepping control system using switching function is firstly proposed for controlling the SCRIM drive system. To reduce chattering in control effort, the backstepping control system using revamped recurrent fuzzy neural network (RFNN) with mended ant colony optimization (ACO) is secondly proposed for controlling the SCRIM drive system to raise robustness of system. Furthermore, four variable learning rates of the weights in the revamped RFNN are adopted by using mended ACO to speed-up parameter's convergence. Finally, comparative performances through some experimental results are verified that the proposed backstepping control system by means of revamped RFNN with mended ACO has better control performances than the other methods for the SCRIM drive system. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
10. Novel Nonlinear Backstepping Control of Synchronous Reluctance Motor Drive System for Position Tracking of Periodic Reference Inputs with Torque Ripple Consideration.
- Author
-
Lin, Chih-Hong and Ting, Jung-Chu
- Abstract
Owing to air-gap field harmonic, cogging torque, stator's current time harmonic and the influence of flux saturation, a synchronous reluctance motor (SynRM) drive system has highly nonlinear uncertainties. Thus the linear control method for the SynRM drive system is difficult to achieved good performance under the nonlinear uncertainty action. To obtain better control performance the novel nonlinear backstepping control system using upper bound with switching function is firstly proposed for controlling the SynRM drive system to prevail the lumped uncertainty. With the proposed control system, the SynRM servo-drive system holds in robustness to uncertainties for the tracking of periodic reference trajectories. To enhance the robustness of the SynRM drive system, the novel nonlinear backstepping control system using adaptive law is proposed for estimating the required lumped uncertainty to reduce chattering phenomenon. When the inertia of the counterweight is varying, this proposed method can perform well in general situations, but cannot get a satisfactory performance. The novel nonlinear backstepping control system using reformed recurrent Hermite polynomial neural network with adaptive law and error estimated law is thus proposed to estimate the lumped uncertainty and compensate estimated error for obtaining better control performance. Furthermore, two varied learning rates of the reformed recurrent Hermite polynomial neural network is derived according to increment type Lyapunov function to speed-up parameter's convergence. Finally, some experimental results with comparative control performances are demonstrated, and then the effectiveness of the proposed control system with better control performance is verified for the position tracking of periodic reference inputs with torque ripple consideration. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
11. Nonlinear backstepping control design of LSM drive system using adaptive modified recurrent Laguerre orthogonal polynomial neural network.
- Author
-
Lin, Chih-Hong
- Abstract
The good control performance of the permanent magnet linear synchronous motor (LSM) drive system is very difficult to achieve using linear controller because of uncertainty effects, such as ending-fictitious force. A backstepping approach is proposed to control the motion of the LSM drive system. With the proposed backstepping control system, the mover position of the LSM drive achieves good transient control performance and robustness. Although favorable tracking responses can be obtained by the backstepping control system, the chattering in the control effort is critical because of the large control gain. Because there are many nonlinear and time-varying uncertainties in the LSM drive systems, the nonlinear backsteping control system, which an adaptive modified recurrent Laguerre orthogonal polynomial neural network (NN) is used to estimate uncertainty, is thus proposed to reduce the chattering in the control effort and thereby enhance the robustness of the LSM drive system. In addition, the on-line parameter training methodology of the modified recurrent Laguerre orthogonal polynomial NN is based on the Lyapunov stability theorem. Furthermore, two optimal learning rates of the modified recurrent Laguerre orthogonal polynomial NN are derived to accelerate parameter convergence. Finally, comparison of the experimental results of the present study demonstrates the high control performance of the proposed control scheme. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
12. Permanent-Magnet Synchronous Motor Drive System Using Backstepping Control with Three Adaptive Rules and Revised Recurring Sieved Pollaczek Polynomials Neural Network with Reformed Grey Wolf Optimization and Recouped Controller.
- Author
-
Lin, Chih-Hong
- Subjects
- *
SYNCHRONOUS electric motors , *ADAPTIVE control systems , *TORQUE control , *LYAPUNOV stability , *POLYNOMIALS , *ALGORITHMS - Abstract
Owing to some nonlinear characteristics in the permanent-magnet synchronous motor (SM), such as nonlinear friction, cogging torque, wind stray torque, external load torque, and unmodeled systems, fine control performances cannot be accomplished by utilizing the general linear controllers. Thereby, the backstepping approach adopting three adaptive rules and a swapping function is brought forward for controlling the rotor motion in the permanent-magnet SM drive system to reduce nonlinear uncertainties effects. To improve the chattering phenomenon, the backstepping control with three adaptive rules using a revised recurring sieved Pollaczek polynomials neural network (RRSPPNN) with reformed grey wolf optimization (RGWO) and a recouped controller is proposed to estimate the internal collection and external collection torque uncertainties, and to recoup the smallest fabricated error of the appraised rule. In the light of the Lyapunov stability, the on-line parametric training method of the RRSPPNN can be derived through an adaptive rule. Furthermore, to obtain a beneficial learning rate and improve the convergence of the weights, the RGWO algorithm adopting two exponential-functional adjustable factors is applied to adjust the two learning rates of the weights. Then, the efficiency of the used controller is validated by test results. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
13. A Rectified Reiterative Sieved-Pollaczek Polynomials Neural Network Backstepping Control with Improved Fish School Search for Motor Drive System.
- Author
-
Lin, Chih-Hong
- Subjects
- *
FISH schooling , *INDUCTION machinery , *POLYNOMIALS , *INDUCTION motors , *TORQUE control , *LYAPUNOV stability , *INDUCTION generators , *SEARCH algorithms - Abstract
As the six-phase squirrel cage copper rotor induction motor has some nonlinear characteristics, such as nonlinear friction, nonsymmetric torque, wind stray torque, external load torque, and time-varying uncertainties, better control performances cannot be achieved by utilizing general linear controllers. The snug backstepping control with sliding switching function for controlling the motion of a six-phase squirrel cage copper rotor induction motor drive system is proposed to reduce nonlinear uncertainty effects. However, the previously proposed control results in high chattering on nonlinear system effects and overtorque on matched uncertainties. So as to reduce the immense chattering situation, we then put forward the rectified reiterative sieved-Pollaczek polynomials neural network backstepping control with an improved fish school search method to estimate the external bundled torque uncertainties and to recoup the smallest reorganized error of the evaluated rule. In the light of Lyapunov stability, the online parametric training method of the rectified reiterative sieved-Pollaczek polynomials neural network can be derived by utilizing an adaptive rule. Moreover, to improve convergence and obtain beneficial learning manifestation, the improved fish school search algorithm is made use of to readjust two fickle learning rates of the weights in the rectified reiterative sieved-Pollaczek polynomials neural network. Lastly, the effectuality of the proposed control system is validated by examination results. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
14. Micrometer Backstepping Control System for Linear Motion Single Axis Robot Machine Drive.
- Author
-
Lin, Chih-Hong and Chang, Kuo-Tsai
- Subjects
- *
PULSE width modulation transformers , *MOTOR drives (Electric motors) , *LINEAR control systems , *DIGITAL signal processing , *PULSE width modulation , *MICROMETERS , *MOTION , *LYAPUNOV functions - Abstract
In order to cut down influence on the uncertainty disturbances of a linear motion single axis robot machine, such as the external load force, the cogging force, the column friction force, the Stribeck force, and the parameters variations, the micrometer backstepping control system, using an amended recurrent Gottlieb polynomials neural network and altered ant colony optimization (AACO) with the compensated controller, is put forward for a linear motion single axis robot machine drive system mounted on the linear-optical ruler with 1 um resolution. To achieve high-precision control performance, an adaptive law of the amended recurrent Gottlieb polynomials neural network based on the Lyapunov function is proposed to estimate the lumped uncertainty. Besides this, a novel error-estimated law of the compensated controller is also proposed to compensate for the estimated error between the lumped uncertainty and the amended recurrent Gottlieb polynomials neural network with the adaptive law. Meanwhile, the AACO is used to regulate two variable learning rates in the weights of the amended recurrent Gottlieb polynomials neural network to speed up the convergent speed. The main contributions of this paper are: (1) The digital signal processor (DSP)-based current-regulation pulse width modulation (PWM) control scheme being successfully applied to control the linear motion single axis robot machine drive system; (2) the micrometer backstepping control system using an amended recurrent Gottlieb polynomials neural network with the compensated controller being successfully derived according to the Lyapunov function to diminish the lumped uncertainty effect; (3) achieving high-precision control performance, where an adaptive law of the amended recurrent Gottlieb polynomials neural network based on the Lyapunov function is successfully applied to estimate the lumped uncertainty; (4) a novel error-estimated law of the compensated controller being successfully used to compensate for the estimated error; and (5) the AACO being successfully used to regulate two variable learning rates in the weights of the amended recurrent Gottlieb polynomials neural network to speed up the convergent speed. Finally, the effectiveness of the proposed control scheme is also verified by the experimental results. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
15. Precision Motion Control of a Linear Permanent Magnet Synchronous Machine Based on Linear Optical-Ruler Sensor and Hall Sensor.
- Author
-
Lin, Chih-Hong
- Subjects
- *
PERMANENT magnets , *PARTICLE swarm optimization , *SYNCHRONOUS electric motors , *LYAPUNOV stability , *NEURAL circuitry , *ONLINE education - Abstract
The linear optical-ruler sensor with 1 μm precision mounted in the linear permanent magnet synchronous machine (LPMSM) is used for measuring the mover position of LPMSM in order to enhance the precision of a measured mover position. Due to nonlinear friction and uncertainty effects, linear controllers are very hard to achieve good mover positioning of LPMSM. The proposed adaptive amended Elman neural network backstepping (AAENNB) control system is adopted for controlling the LPMSM drive system to bring about the mover positioning precision of LPMSM. Firstly, a backstepping scheme is posed for controlling the tracing motion of the LPMSM drive system. The proposed backstepping control system, which is applied in the mover position of the LPMSM drive system, possesses better dynamic control performance and robustness to uncertainties for the tracing trajectories. Because of the LPMSM with nonlinear and time-varying dynamic characteristics, an adaptive amended Elman neural network uncertainty observer (AAENNUO) is posed to estimate the required lumped uncertainty. According to the Lyapunov stability theorem, on-line parameter training methodology of the amended Elman neural network (AENN) can be derived by use of adaptive law. The error estimated law is proposed to compensate for the observed error induced by the AENN with adaptive law. Furthermore, to help improve convergence and to obtain better learning performance, the mended particle swarm optimization (PSO) algorithm is utilized for adjusting the varied learning rate of the weights in the AENN. At last, these experimental results, which show better performance, are verified by the proposed control system. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.