Search

A novel single-stage single-switch electronic ballast topology with a unity power factor is presented in this paper. The proposed circuit consists of an integrated buck–boost stage that operates in the discontinuous conduction mode to provide a high power factor and a single-switch current-fed resonant inverter to stabilize the lamp current. The proposed topology presents a low cost and compact electronic ballast design method. The detailed descriptions of the circuit's operating principles are provided in this paper. The design equations and mathematical analysis regarding the proposed circuit are discussed in this paper. The proposed ballast has been tested with an 18-W compact fluorescent lamp, and the experimental results confirmed that a very high power factor of 0.995 and an efficiency of 83.4% have been achieved. [ABSTRACT FROM PUBLISHER]

A very high power factor electronic ballast that uses a single switch in the power circuit is proposed in this paper for compact fluorescent lamps (CFLs). The proposed power circuit is designed by integrating a SEPIC power factor corrector with a novel single-switch current-fed resonant inverter. The advantage of this single-switch electronic ballast is that it greatly simplifies the gate-drive circuit design due to the elimination of isolation devices that are otherwise required in the conventional half-bridge totem pole configuration. This topology features a reduction of at least two switches in the power stage compared to conventional two-stage approach for high-power-factor electronic ballasts. In addition, the proposed circuit is also able to achieve close-to-unity power factor by operating the integrated SEPIC power factor corrector in discontinuous conduction mode. The conduction loss of the switch in the proposed circuit is also significantly reduced compared to the conventional class-E single-switch resonant inverter. Experimental results are provided to justify all the theoretical analysis and highlight the features of the proposed circuit on a 13-W CFL. [ABSTRACT FROM AUTHOR]

A single-stage dimmable electronic ballast with very high power factor and high efficiency is presented in this paper. A compact lamp power circuit is designed by integrating a buck-boost power factor corrector with a current-fed resonant inverter. This integration produces a single power-processing unit that minimizes the number of circuit components. The proposed resonant inverter reduces the circulating current in the resonant tank and allows simple gate drivers to be used so that isolation devices can be eliminated. With the buck-boost stage operating in the discontinuous conduction mode (DCM), a close-to-unity power factor is achieved for different lamp-power conditions. A small-signal analysis is presented, and a simple variable frequency controller is developed using the modified 555 timer to provide dimming operations. Simulation and experimental waveforms are provided to highlight the merits of the proposed circuit for a 40-W compact fluorescent lamp. [ABSTRACT FROM AUTHOR]