Search

Natural fibre reinforced polymer composites have drawn the attention of researchers in the creation of novel materials suitable for industrial applications. These polymer composites have favourable mechanical characteristics. Epoxy polymer's versatility and diversity make it suitable for a wide range of industrial applications. The mould casting technique approach was utilised in this work to develop polymer composites using alkali-treated banana fibres and filled with MgO nanoparticle. The study was conducted on the characteristics of Nano MgO, as well as its mechanical qualities such as fracture toughness and surface morphology. The incorporation of Nano MgO enhanced the fracture toughness of the polymer composites with the addition of 1 % MgO. The scanning electron microscopy analysis of the surface morphology revealed the presence of brittle fracture in the specimen.

Recognizing the importance of properties of the plant fibers for their use in polymeric composites and nonavailability of data on tensile, thermal, and other properties of banana fibers of Karnataka (India), a study was undertaken with the objective of determining some of these properties. This article presents determination of structural aspects of the fibers by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) techniques; obtaining stress-strain curves and tensile properties by tensile testing; finally, thermal properties by differential scanning calorimetry and thermogravimetric analysis. FTIR spectrum of banana fibers showed aromatic character, while XRD results indicated the fiber to have mainly the cellulose I structure and crystallinity index of 52%. Thermal-degradation details of fiber samples were revealed by thermal studies. Stress-strain curves of banana fibers suggested their brittle nature with moderate values of tensile strength, but low percentage elongation. Weibull analysis of obtained tensile strength values revealed variation of “characteristic strength” values from 3800 MPa at 99% reliability to 22,700 MPa with 0.01% reliability. Morphology studies revealed the number of defects along the length of the fiber, while fractured surface exhibited flat surface with intracellular fractures clearly indicating brittle nature of the fiber. [ABSTRACT FROM PUBLISHER]