Search

Mechanical stirring of bulk Te in N‐methyl‐2‐pyrrolidone (NMP) solution at room temperature resulted in the formation of free‐standing few‐layer (∼1.2–2.8 nm) crystalline ultrathin nanosheets of tellurene with a large lateral thickness (∼1–1.6 μm) as confirmed by atomic force microscopy (AFM). High‐resolution transmission electron microscopy (HRTEM) confirms the presence of α‐ and β‐phases of tellurene. First‐principle density functional theoretical (DFT) based electronic structure calculations demonstrate the indirect band gap of bi‐layer β‐tellurene. The band gap decreases with increasing number of layers in the tellurene nanosheet. [ABSTRACT FROM AUTHOR]

Orthorhombic GeSe is a promising thermoelectric material. However, large band gap and strong covalent bonding result in a low thermoelectric figure of merit, zT≈0.2. Here, we demonstrate a maximum zT≈1.35 at 627 K in p‐type polycrystalline rhombohedral (GeSe)0.9(AgBiTe2)0.1 , which is the highest value reported among GeSe based materials. The rhombohedral phase is stable in ambient conditions for x=0.8–0.29 in (GeSe)1−x(AgBiTe2)x. The structural transformation accompanies change from covalent bonding in orthorhombic GeSe to metavalent bonding in rhombohedral (GeSe)1−x(AgBiTe2)x. (GeSe)0.9(AgBiTe2)0.1 has closely lying primary and secondary valence bands (within 0.25–0.30 eV), which results in high power factor 12.8 μW cm−1 K−2 at 627 K. It also exhibits intrinsically low lattice thermal conductivity (0.38 Wm−1 K−1 at 578 K). Theoretical phonon dispersion calculations reveal vicinity of a ferroelectric instability, with large anomalous Born effective charges and high optical dielectric constant, which, in concurrence with high effective coordination number, low band gap and moderate electrical conductivity, corroborate metavalent bonding in (GeSe)0.9(AgBiTe2)0.1. We confirmed the presence of low energy phonon modes and local ferroelectric domains using heat capacity measurement (3–30 K) and switching spectroscopy in piezoresponse force microscopy, respectively. [ABSTRACT FROM AUTHOR]

A two‐step optimization strategy is used to improve the thermoelectric performance of SnTe via modulating the electronic structure and phonon transport. The electrical transport of self‐compensated SnTe (that is, Sn1.03Te) was first optimized by Ag doping, which resulted in an optimized carrier concentration. Subsequently, Mn doping in Sn1.03−xAgxTe resulted in highly converged valence bands, which improved the Seebeck coefficient. The energy gap between the light and heavy hole bands, i.e. ΔEv decreases to 0.10 eV in Sn0.83Ag0.03Mn0.17Te compared to the value of 0.35 eV in pristine SnTe. As a result, a high power factor of ca. 24.8 μW cm−1 K−2 at 816 K in Sn0.83Ag0.03Mn0.17Te was attained. The lattice thermal conductivity of Sn0.83Ag0.03Mn0.17Te reached to an ultralow value (ca. 0.3 W m−1 K−1) at 865 K, owing to the formation of Ag7Te4 nanoprecipitates in SnTe matrix. A high thermoelectric figure of merit (z T≈1.45 at 865 K) was obtained in Sn0.83Ag0.03Mn0.17Te. [ABSTRACT FROM AUTHOR]

The realization of n‐type Ge chalcogenides is elusive owing to intrinsic Ge vacancies that make them p‐type semiconductors. GeSe crystallizes into a layered orthorhombic structure similar to SnSe at ambient conditions. The high‐symmetry cubic phase of GeSe is predicted to be stabilized by applying 7 GPa external pressure or by enhancing the entropy by increasing to temperature to 920 K. Stabilization of the n‐type cubic phase of GeSe at ambient conditions was achieved by alloying with AgBiSe2 (30–50 mol %), enhancing the entropy through solid solution mixing. The interplay of positive and negative chemical pressure anomalously changes the band gap of GeSe with increasing the AgBiSe2 concentration. The band gap of n‐type cubic (GeSe)1−x(AgBiSe2)x (0.30≤x≤0.50) has a value in the 0.3–0.4 eV range, which is significantly lower than orthorhombic GeSe (1.1 eV). Cubic (GeSe)1−x(AgBiSe2)x exhibits an ultralow lattice thermal conductivity (κL≈0.43 W m−1 K−1) in the 300–723 K range. The low κL is attributed to significant phonon scattering by entropy‐driven enhanced solid‐solution point defects. [ABSTRACT FROM AUTHOR]

Topological crystalline insulator (TCI), Pb0.6Sn0.4Te, exhibits metallic surface states protected by crystal mirror symmetry with negligibly small band gap. Enhancement of its thermoelectric performances needs tuning of its electronic structure particularly through engineering of its band gap. While physical perturbations tune the electronic structure of TCI by breaking of the crystal mirror symmetry, chemical means such as doping have been more attractive recently as they result in better thermoelectric performance in TCIs. Here, we demonstrate that K doping in TCI, Pb0.6Sn0.4Te, breaks the crystal mirror symmetry locally and widens electronic band gap, which is confirmed by direct electronic absorption spectroscopy and electronic structure calculations. K doping in Pb0.6Sn0.4Te increases p-type carrier concentration and suppresses the bipolar conduction via widening a band gap, which collectively boosts the thermoelectric figure of merit (ZT) to 1 at 708K. [ABSTRACT FROM AUTHOR]

Topological crystalline insulators (TCIs) are a new quantum state of matter in which linearly dispersed metallic surface states are protected by crystal mirror symmetry. Owing to its vanishingly small bulk band gap, a TCI like Pb0.6Sn0.4Te has poor thermoelectric properties. Breaking of crystal symmetry can widen the band gap of TCI. While breaking of mirror symmetry in a TCI has been mostly explored by various physical perturbation techniques, chemical doping, which may also alter the electronic structure of TCI by perturbing the local mirror symmetry, has not yet been explored. Herein, we demonstrate that Na doping in Pb0.6Sn0.4Te locally breaks the crystal symmetry and opens up a bulk electronic band gap, which is confirmed by direct electronic absorption spectroscopy and electronic structure calculations. Na doping in Pb0.6Sna4Te increases p-type carrier concentration and suppresses the bipolar conduction (by widening the band gap), which collectively gives rise to a promising zTof1 at 856 Kfor Pb0.58Sn0.40Na0.02Te. Breaking of crystal symmetry by chemical doping widens the bulk band gap in TCI, which uncovers a route to improve TCI for thermoelectric applications. [ABSTRACT FROM AUTHOR]