Search

In this paper, the design of a cavity crossover with three intersecting channels is presented. The three fundamental modes of a cavity resonator, namely, TE011, TE101, and TM110 modes, are adopted to resonate at each of three channels, respectively. Due to the modal orthogonality of these fundamental modes, high isolation among three channels can be achieved. Two kinds of crossovers, for narrowband and broadband applications, are presented. For the narrowband case, the proposed crossover resonates at 2.91 GHz with the fractional bandwidth of 1.4%. For the broadband case, the proposed crossover resonates at 3 GHz with the fractional bandwidth of 24%. The isolations of both designs reach more than 50 dB. For a proof of concept, the broadband example of the cavity crossover structures is fabricated and measured. A good agreement between the simulated and the measured results verifies the accuracy of the proposed design methodology. [ABSTRACT FROM AUTHOR]

A class of bandwidth-enhanced full-metal cavity-backed slot filtenna is proposed in this communication. The design is constructed by three resonators. They are two resonance windows and one resonance cavity. As a consequence of that, three resonance modes are achieved using a single cavity. By using this resonance window, the 10 dB frequency bandwidth of the proposed cavity antenna has wide fractional bandwidth (FBW) of 20%. To the authors’ best knowledge, the proposed filtenna achieves the widest FBW among those published full-metal cavity-backed slot filtennas. Moreover, a fifth-order filtenna is also designed to further broaden the 10 dB FBW to 24%. Finally, an antenna prototype was fabricated and tested for experimental verification of the proposed design methodology. Good agreement between the measurement and simulation shows the feasibility of the proposed wideband full-metal filtenna using a resonance window approach. [ABSTRACT FROM AUTHOR]

Two third‐order continuously tunable bandpass filters featuring single‐/dual‐band operations, respectively, are presented in this letter. One requires a set of three metallic posts in a single metallic cavity, while the other needs one more set to achieve the desired dual‐band operation. The length of each post is adjusted through a screw from its top to establish the center frequency of the passband. Moreover, the coupling among these three resonators can be controlled by varying their locations to determine the bandwidth of the passband. At the bottom of the cavity, grooves are created to linearize and extend the frequency tuning range. In addition, compared to traditional coaxial cavity filters, the proposed designs offer the advantages of ease in fabrication and low in weight. A practical example for the dual‐band design is presented for experimental verification. The simulated range for the tunable passband is from 0.8 to 3.2 GHz, which amounts to a fractional bandwidth of 120%. The simulated results agree well with the measured data. [ABSTRACT FROM AUTHOR]

An integrated method of broadband duplex–filtenna based on a 3-D metallic cavity structure is proposed in this paper. In our design, two broadband filtennas with different operation frequency bands share the same metallic cavity-backed resonator. The two operation bands are realized with fractional bandwidths (FBWs) of 24% and 18%. The whole total FBW of two bands achieves 57%, and there are radiated nulls at the transition band showing a good filtering property. By integrating these two filtennas, a duplex–filtenna is formed with unidirectional radiation property. The radiation gain of these two filtennas exhibits good filtering property. The filtenna gain frequency responses have two transmission zeros near the lower and upper cutoff frequencies of both lower and upper operation bands. To validate the proposed concept, one cavity-backed duplex–filtenna with low-profile metallic cavity is designed and fabricated. The measured results have verified the simulation results well, and the isolation between the two wideband channels exceeds 30 dB as predicted in theory. [ABSTRACT FROM AUTHOR]

This paper proposes a novel class of wideband metal cavity multiple-mode bandpass filters (BPFs), consisting of a triple-mode filter and a quadruple-mode filter. Two TE11 degeneration modes in a single metal cavity are excited by using an off-centered approach instead of a traditional corner-cut approach. They work together with the TM10 mode to constitute a three-pole wide passband with a fractional bandwidth of 30% at the central frequency of 3.2 GHz. Moreover, an off-centered metal cylinder can properly excite an extra TM11 mode in the passband. As such, this TM11 mode, TM10 mode, and a pair of degeneration TE11 modes can be simultaneously utilized to form a quadruple-mode BPF. Compared with the triple-mode BPF, the quadruple-mode BPF has better performance in term of the steepness of rejection skirt. The fractional bandwidth of this BPF can achieve up to 31%. In final, the two proposed BPFs are fabricated by using the silver plated aluminum technology. Measured S-parameter frequency response and group delay have satisfactorily matched with the simulated results. [ABSTRACT FROM PUBLISHER]

ABSTRACT A compact triple-mode dielectric resonator (DR) bandpass filter (BPF) based on a single waveguide cavity is proposed, while three resonant modes of a single cavity are classified as a TM mode and a pair of hybrid degenerate modes (HE modes). Two HE degeneration modes in a single metal cavity are excited by using an off-centered DR approach. They work together to constitute a three-pole passband with a fractional bandwidth of 2.7% at the central frequency of 2.53 GHz. To verify the proposed idea, the proposed triple-mode DR BPF is fabricated by using silver plated aluminum metal cavity, and the simulated and measured results are in good agreement. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:1645-1647, 2016 [ABSTRACT FROM AUTHOR]

In this communication, an $S$ -band wide-bandwidth and wide-beamwidth full-metal circularly polarized (CP) cavity-backed slot antenna is proposed. A pair of triangular prisms placed at the corners of the cavity is introduced to produce TE101 and TE011 modes with orthogonal electric fields. These two modes are used to achieve the CP radiation and radiate the energy through a single-circular slot. By simultaneously varying the prisms’ size and slot radius, the axial ratio (AR) bandwidth (ARBW) improves. The ARBW is further improved by replacing the circular slot with an elliptical slot. As a result, the ARBW increases from 1.0% to 10.3% without complicating the antenna structure and without enlarging the antenna size. Besides, the antenna still operates at two degenerate modes to introduce stable radiation gain and pattern. In addition, the proposed CP slot antenna features a wide ARBW. The final measurement shows that the proposed CP antenna can achieve a 9.5% bandwidth, a stable gain of 7.65 dBic ± 0.15 dBic, and higher than 140° ARBWs in a wide frequency range. The peak total radiation efficiency and aperture efficiency are about 97% and 91%, respectively. [ABSTRACT FROM AUTHOR]

This article introduces a simple wideband circularly polarized (CP) S‐shaped slot antenna for ISM band wireless communication applications. By using a wide curve S‐shaped slot patch on the top side and a T‐shaped feeding line on the bottom side of the substrate, the wideband CP wave is generated. The overall size of the proposed antenna is 0.85λ × 0.85λ × 0.011λ (λ is the wavelength of the lowest operating frequency) and it has a broad impedance bandwidth of 68.1% between 1.66 and 3.44 GHz for S11 < –10 dB and a 3 dB axial‐ratio bandwidth of 57.1% between 1.68 and 3.06 GHz. Within the axial‐ratio bandwidth, the measured gain of the proposed antenna ranged from 2.1 to 5.4 dBic. The measured results are in good agreement with simulated results. The new type of slot antenna with wide bandwidth and simple structure is a good candidate for various RFID applications. [ABSTRACT FROM AUTHOR]

A wideband high-efficiency millimeter-wave (mm-wave) circularly polarized (CP) array which is constituted by novel planar substrate integrated waveguide (SIW)-fed S-dipoles is presented in this communication. The proposed mm-wave CP S-dipole consists of two rotational symmetric curved arms and is fed differentially through aperture coupling, which features simple configuration and excellent performance. Detailed analysis is given to explain the operating principles of this element. It is noted that superior element performance including a wide impedance bandwidth of 43%, a wide 3 dB axial ratio (AR) bandwidth of 36%, and 1 dB gain bandwidth of 38% is achieved by the planar SIW-fed S-dipole. By feeding 64 in-phase S-dipole elements through a full-corporate SIW feeding network, a planar wideband highly efficient mm-wave $8 \times 8$ CP array is realized. To verify the design concept, a prototype operating at Ka-band is fabricated and measured. The measurement results indicate that the proposed array achieves a wide overlapped bandwidth of 27.6%, a high antenna gain of 25.2 dBic, and a high aperture efficiency of 89.9%. Attributed to the planar and robust array structure as well as its excellent performance, the presented array is a good candidate for various mm-wave applications. [ABSTRACT FROM AUTHOR]

High-isolation in-band full-duplex (IBFD) cavity-backed slot antennas (CBSAs) in a single resonant cavity are presented in this article. The TE101 and TE011 cavity modes combined with a modified orthogonal feeding structure are first used to design the duplex antenna. The proposed feeding structure can reduce the port-to-port coupling strength and produce a very high isolation. By replacing the crossed radiation slots with two pairs of parallel radiation slots, enhanced radiation gain is achieved. To tackle the narrow bandwidth for the single-mode operation, two orthogonal resonant-iris modes produced by the two feeding slots are introduced to design a dual-mode wideband IBFD antenna. The simulated bandwidth is increased from 0.8% to 5.7%. All the presented antennas with improved performances are designed and realized in a single full-metal resonant cavity. Compared with the conventional design method, high isolation, enhanced gain, and enhanced bandwidth are simultaneously achieved without enlarging the antenna size. Finally, the prototype of the wideband IBFD slot antenna is measured and presented to validate the design concept, which has a 5.8% bandwidth, higher than 95% total efficiency, especially an isolation higher than 72 dB. [ABSTRACT FROM AUTHOR]

A dual-band planar crossover with simple structure is proposed. This crossover is derived from the conventional single-band two-section branch-line crossover by doubly extending the length of its vertical transmission lines, which realizes the dual-band operation. Closed-form equations for design parameters are derived, which simplifies design procedure of the proposed crossover and shows that the available bandwidth of the passband increases with the increasing frequency ratio. By adding one short-circuited stub and one open-circuited stub to the originally proposed dual-band crossover, two types of modified dual-band crossovers and their closed-form design equations are proposed for smaller and larger frequency ratios applications. For verification, four different dual-band crossovers are designed and simulated, of which two microstrip crossovers operating at 1/1.8 and 1/2.3 GHz are fabricated and measured. The measured results are in good agreement with the simulated ones. [ABSTRACT FROM PUBLISHER]

An ultrawideband stacked single-turn spiral antenna with an integrated feeding structure is presented in this communication. The proposed antenna consists of two stacked planar single-turn Archimedean spirals which are wound in orthogonal directions. By connecting these two stacked spirals through two vertical posts, the traveling-wave current path is lengthened and, hence, the operating frequency of Mode 1 is decreased. To reduce the feeding complexity, an integrated tapered microstrip line is used to feed the spiral, which also acts an impedance transformer. It is demonstrated that the proposed antenna can operate across 0.29–5 GHz with |S11| < −10 dB and 0.75–3.64 GHz with axial ratio (AR) < 3 dB. Compared with the single-turn Archimedean spiral with the same radius, the impedance and AR bandwidth of the proposed antenna are enhanced from 5:1 to 17:1 and from 1.6:1 to 4.9:1, respectively, showing that the proposed antenna can be a good candidate for ultrawideband applications. [ABSTRACT FROM AUTHOR]

A printed dual‐band dipole filtenna with flexible frequency ratio and improved band‐notched performance is proposed. It consists of a driven dipole and three parasitic elements. For the driven dipole with short and long arms, a radiation null is found between two passbands, which achieves a band‐notched filtering characteristic. Two parasitic elements are introduced to enhance the passband bandwidth and an additional parasitic element is utilized to improve the band‐notched performance. In addition, the characteristics of the proposed design including flexible frequency ratio, independent controllable operating frequency, and controllable band‐notched bandwidth have also been demonstrated. A filtenna prototype is fabricated and tested. Measured results show that a fractional bandwidth of 21.1% and 18.1% is obtained in the lower and upper passbands, respectively. The measured efficiency is 84% in the lower band and 74% in the upper band but the efficiency sharply decreases to about 13% within the notched band. [ABSTRACT FROM AUTHOR]

In this paper, a novel on-chip circuit design approach is proposed using hybrid coupling technique. Taking advantage of this technique, a microwave bandpass filter (BPF) is proposed as a design example for proof of concept. Based on stub-loaded stepped-impedance transmission lines and folded stepped-impedance meander line from different metal layers, the proposed BPF can generate three transmission zeros (TZs) and two transmission poles (TPs), which are excited through the hybrid mutual couplings between the inductive and capacitive metals. To understand the principle of this configuration, an equivalent LC-circuit model is presented and simplified, of which the TZs and TPs of the proposed BPF are estimated by the extracted transfer function. The calculated results exhibit good agreements with the simulated and measured ones. In addition, the bandwidth and center frequency of the proposed BPF can be tuned flexibly. Finally, to further demonstrate the feasibility of this approach in practice, the structure is implemented and fabricated in a commercial 0.13- $\mu \text{m}$ SiGe (Bi)-CMOS technology. The measurement results show that the proposed BPF, whose chip size is 0.39 mm $\times0.45$ mm (excluding the test pads), can realize a wide bandwidth from 19.7 to 33.2 GHz with a return loss of 15.8 dB and insertion loss of 3.8 dB at the center frequency of 26.5 GHz. [ABSTRACT FROM AUTHOR]