Search

Doping of suitable metal ions in ferroelectric oxides modifies the physical properties and can induce additional functionalities. Here, we present a detailed study on the effects of Sm concentration on the structural, dielectric, ferroelectric, and piezoelectric properties of ((K0.5Na0.5)1−3xSmx)NbO3 (KNSN) (0.00 ≤ x ≤ 0.02) ceramics. X‐ray diffraction and Raman spectroscopic analysis indicate that KNSN ceramics exhibit the single‐phase orthorhombic (Amm2) structure for x = 0.00 and the coexistence of orthorhombic and tetragonal (Amm2 + P4mm) structure for the composition range 0.005 ≤ x ≤ 0.02. The tetragonal phase fraction increases with an increase in Sm concentration. We observed dielectric relaxation behavior in KNSN at orthorhombic to tetragonal (TO–T) phase transition temperature, and its origin can be attributed to the structural heterogeneity at the inter‐ferroelectric phase boundary. Increasing Sm concentration leads to the broadening of the ferroelectric phase transition peaks. Further, the structural heterogeneity of the ceramics was seen from the slope of the dielectric constant versus log frequency and central peak behavior of Raman spectra at room temperature (RT). The study reveals that x = 0.005 shows maximum dielectric constant (Ɛr = 583), remanent polarization (2Pr = 57.02 μC/cm2), and piezoelectric coefficient (d33 = 94 pC/N) at RT and is associated with increased local structural heterogeneity due to Sm doping. [ABSTRACT FROM AUTHOR]

Doping of suitable metal ions in ferroelectric oxides modifies the physical properties and can induce additional functionalities. Here, we present a detailed study on the effects of Sm concentration on the structural, dielectric, ferroelectric, and piezoelectric properties of ((K0.5Na0.5)1−3xSmx)NbO3 (KNSN) (0.00 ≤ x ≤ 0.02) ceramics. X‐ray diffraction and Raman spectroscopic analysis indicate that KNSN ceramics exhibit the single‐phase orthorhombic (Amm2) structure for x = 0.00 and the coexistence of orthorhombic and tetragonal (Amm2 + P4mm) structure for the composition range 0.005 ≤ x ≤ 0.02. The tetragonal phase fraction increases with an increase in Sm concentration. We observed dielectric relaxation behavior in KNSN at orthorhombic to tetragonal (TO–T) phase transition temperature, and its origin can be attributed to the structural heterogeneity at the inter‐ferroelectric phase boundary. Increasing Sm concentration leads to the broadening of the ferroelectric phase transition peaks. Further, the structural heterogeneity of the ceramics was seen from the slope of the dielectric constant versus log frequency and central peak behavior of Raman spectra at room temperature (RT). The study reveals that x = 0.005 shows maximum dielectric constant (Ɛr = 583), remanent polarization (2Pr = 57.02 μC/cm2), and piezoelectric coefficient (d33 = 94 pC/N) at RT and is associated with increased local structural heterogeneity due to Sm doping. [ABSTRACT FROM AUTHOR]

Ferroelectric materials exhibiting switchable and spontaneous polarization have strong potential to be utilized in various novel electronic devices. Solid solutions of different perovskite structures induce the coexistence of various phases and enhance the physical functionalities around the phase coexistence region. The construction of phase diagrams is important as they describe the material properties, which are linked to the underpinning physics determining the system. Here we present the phase diagram of (K0.5Na0.5NbO3)–(Ba0.5Sr0.5TiO3) (KNN-BST) system as a function of composition and their associated physical properties. Lead-free (1 − x)KNN–xBST (0 ≤ x ≤ 0.3) solid solution ceramics were synthesized by conventional solid-state reaction technique. The X-ray diffraction and Raman spectroscopic studies indicate composition-dependent structural phase transitions from an orthorhombic phase for x = 0 to orthorhombic + tetragonal dual-phase (for 0.025 ≤ x ≤ 0.15), then a tetragonal + cubic dual-phase (x = 0.2) and finally a cubic single phase for x ≥ 0.25 at room temperature (RT). Among these, the orthorhombic + tetragonal dual-phase system shows an enhanced value of the dielectric constant at room temperature. The phase transition temperatures, orthorhombic to tetragonal (TO-T) and tetragonal to cubic (TC), decrease with the increase in BST concentrations. The ferroelectric studies show a decrease of both 2Pr and EC values with a rise in BST concentration and x = 0.025 showed a maximum piezoelectric coefficient. [ABSTRACT FROM AUTHOR]

We report the preparation of ferroelectric Ba0.7Ca0.3TiO3 (BCT) ceramics by sol-gel auto combustion technique and its specific functional properties. The structural, dielectric and ferroelectric properties of BCT are strongly depending on the sintering temperature which also improves the phase purity and crystalline quality of the system. The formation of single-phase BCT is realized by sintering at 1450 °C for 4 h. suggesting the solubility limit of Ca2+ cation. Grain size and relative density are increased as the sintering temperature increased. The Rietveld refinement technique is employed for the detailed crystal structural analysis. The temperature and frequency dependent dielectric properties are investigated; the measured dielectric constant is εr = 2680 at the transition temperature Tc=120 °C for the single phase ferroelectric BCT. Sintering and electrical poling improved the shape of the hysteresis curve and reduced the leakage current. Electrical conduction mechanism is also discussed. [ABSTRACT FROM AUTHOR]

This article presents the effect of lead-borosilicate glass (65PbO 20B 2 O 3 15SiO 2 , mol%) (PBS) addition on the structure, microstructure, dielectric, ferroelectric and energy storage properties of Ba 0.9995 La 0.0005 TiO 3 (BLT) ceramics system has been systematically investigated. XRD analysis revealed the tetragonal (T) phase at room temperature. Addition of PBS glass results in decrease in ferroelectricity and improved breakdown properties. High maximum polarization (P s ∼21.53 μC/cm 2 ) and remnant polarization values (2P r ∼8.75 μC/cm 2 ) were obtained from ferroelectric (P-E) hysteresis loops for the BLT ceramics. Two dielectric anomalies at 420 K and 600 K were observed due to the phase transformation. The glass-ceramics heat treated at 900 °C for 3 h was found to possess optimal properties with breakdown strength of >300 kV/cm and energy storage density of 0.564 J/cm 3 , which is a promising glass-ceramic ferroelectric capacitor material for high energy storage density dielectrics. [ABSTRACT FROM AUTHOR]