Search

A global seabed sediment map has been developed since 1995 to provide a necessary tool for different needs. This project is not completely original since it had already been done in 1912 when the French hydrographic Office and the University of Nancy produced sedimentary maps of the European and North American coasts. Seabed sediments is one of the last geographical domains which can't benefit of satellite data. Without this contribution, sediment maps need to use very old data mixed with the new ones to be able to reach the goal of a global map. In general, sediment maps are made with the latest available techniques and are replaced after a few decades, thus generating new cartographic works as if all the previous efforts had become useless. Such approach underestimates the quality of past works and prevents to have maps covering large areas. The present work suggests to standardize all kind of sedimentary data from different periods and from very different acquisition systems and integrate them into a single product. This process has already been done for bathymetric data of marine charts, we discuss in this article of the application of this method at a global scale for sediment data. [ABSTRACT FROM AUTHOR]

Tidal sand dune dynamics is observed for two tidal cycles in the Arcachon tidal inlet, southwest France. An array of instruments is deployed to measure bathymetric and current variations along dune profiles. Based on the measurements, dune crest horizontal and vertical displacements are quantified and show important dynamics in phase with tidal currents. We observed superimposed ripples on the dune stoss side and front, migrating and changing polarity as tidal currents reverse. A 2D RANS numerical model is used to simulate the morphodynamic evolution of a flat non-cohesive sand bed submitted to a tidal current. The model reproduces the bed evolution until a field of sand bedforms is obtained that are comparable with observed superimposed ripples in terms of geometrical dimensions and dynamics. The model is then applied to simulate the dynamics of a field of large sand dunes of similar size as the dunes observed in situ. In both cases, simulation results compare well with measurements qualitatively and quantitatively. This research allows for a better understanding of tidal sand dune and superimposed ripple morphodynamics and opens new perspectives for the use of numerical models to predict their evolution. [ABSTRACT FROM AUTHOR]

The seafloor—or bathymetry—of the world's coastal waters remains largely unknown despite its primary importance to human activities and ecosystems. Here we present S2Shores (Satellite to Shores), the first sub-kilometer global atlas of coastal bathymetry based on depth inversion from wave kinematics captured by the Sentinel-2 constellation. The methodology reveals coastal seafloors up to a hundred meters in depth which allows covering most continental shelves and represents 4.9 million km 2 along the world coastline. Although the vertical accuracy (RMSE 6–9 m) is currently coarser than that of traditional surveying techniques, S2Shores is of particular interest to countries that do not have the means to carry out in situ surveys and to unexplored regions such as polar areas. S2Shores is a major step forward in mitigating the effects of global changes on coastal communities and ecosystems by providing scientists, engineers, and policy makers with new science-based decision tools. [ABSTRACT FROM AUTHOR]

State-of-art echosounders reveal fine-scale details of mobile sandy bedforms, which are commonly found on continental shelfs. At present, their dynamics are still far from being completely understood. These bedforms are a serious threat to navigation security, anthropic structures and activities, placing emphasis on research breakthroughs. Bedform geometries and their dynamics are closely linked; therefore, one approach is to develop semi-automatic tools aiming at extracting their structural features from bathymetric datasets. Current approaches mimic manual processes or rely on morphological simplification of bedforms. The 1D and 2D approaches cannot address the wide ranges of both types and complexities of bedforms. In contrast, this work attempts to follow a 3D global semi-automatic approach based on a bathymetric TIN. The currently extracted primitives are the salient ridge and valley lines of the sand structures, i.e., waves and mega-ripples. The main difficulty is eliminating the ripples that are found to heavily overprint any observations. To this end, an anisotropic filter that is able to discard these structures while still enhancing the wave ridges is proposed. The second part of the work addresses the semi-automatic interactive extraction and 3D augmented display of the main lines structures. The proposed protocol also allows geoscientists to interactively insert topological constraints. [ABSTRACT FROM AUTHOR]

There is a pressing need for a fast and efficient satellite remote sensing tool to estimate coastal bathymetry for any coastline in the world. To date, satellite methods for deriving bathymetry have mainly focused on linking the radiometric response to a known water depth, as with SPOT, Landsat and Sentinel. Here, wave properties (static and dynamic) are approximated using the small time delay between the different color bands of Sentinel-2 to then calculate a depth using wave linear dispersion theory. In this paper, we present a spatial correlation method within the S2Shores (Satellites to Shores) Python toolbox: a processing chain/toolbox of coastal observations using methods applied to optical satellites. The resulting individual bathymetries are finally qualified according to the standards of the International Hydrographic Organization, anticipating their operational use. • S2Shores spatial-correlation method for optical satellite coastal observations. • Bathymetry qualified with the International Hydrographic Organization standards. • Wave characteristics from the time delay between spectral bands of Sentinel-2. [ABSTRACT FROM AUTHOR]

The detailed morphology and internal structure of the Calabrian accretionary wedge and adjacent Eastern Sicily margin are imaged in unprecedented detail by a combined dataset of multi-beam bathymetry and high-resolution seismic profiles. The bathymetric data represent the results of 6 recent marine geophysical surveys since 2010 as well as a compilation of earlier surveys presented as a 2 arc-sec (60 m) grid. Several distinct morpho-tectonic provinces are identified including: the deeply incised Malta–Hyblean Escarpment, numerous submarine canyons, broad regions of relatively flat seafloor dominated by fields of sediment waves, the gently undulating anticlinal fold-and-thrust belts of the external Calabrian accretionary wedge and the adjacent portion of the Western Mediterranean Ridge. The Calabrian arc can be divided into 4 domains (from SE to NW): 1) the undeformed Ionian abyssal plain, 2) the external evaporitic wedge, 3) the internal clastic wedge, 4) the Calabrian backstop (Variscan crystalline basement). The Calabrian accretionary wedge can also be divided laterally into two major lobes, the NE- and the SW lobes, and two minor lobes. The kinematics of the limit between the two major lobes is investigated and shown to be sinistral in the external (evaporitic) wedge. A network of radial slip lines within the southernmost external wedge unequivocally demonstrate ongoing dextral displacement of a rigid indenter (representing the corner of the clastic wedge) into the evaporitic wedge thereby confirming the geodynamic model of an active lateral slab tear fault here off eastern Sicily. The slab tear produces a series of major sub-parallel dextral strike-slip faults offshore Mt. Etna and south of the Straits of Messina consistent with the relative motions between Calabria and the Peloritan domain (NE Sicily). Abundant strike-slip faulting, and wide-spread folding and thrusting observed throughout the entire accretionary wedge, indicate regional shortening between the Ionian abyssal plain (foreland) and the Calabrian–Peloritan backstop caused by active subduction. [ABSTRACT FROM AUTHOR]

Large-scale coastal bathymetry is paramount to understand natural and human-induced coastal behaviour and plays a vital role in coastal research and governance. Here, we use a recently developed algorithm, S2Shores (Satellite to Shores), to invert coastal bathymetry from wave kinematics, based on the linear dispersion relation. Wave numbers and celerity are extracted from optical Sentinel-2 imagery, by exploiting the small temporal offset between the image bands of its Multi-Spectral Instrument. Inverted depths are output at 200 m resolution, and individual depth points are merged to create a composite bathymetry using a weighted average of images from 10 different dates. The resulting bathymetry mosaic spans 4000 km along the West African coast. S2Shores is able to detect depths up to 35 m, depending on mean incident wave conditions and cloud cover, which varies by location. Underwater features are well reproduced by S2Shores, such as flow channels in Guinea, the St. Ann's Shoal in Sierra Leone, and ebb delta lobes at several outlets along the Niger River Delta. S2Shores results match well (r 2 = 0.76, RMSE = 4.9 m) with a bathymetry survey along the Senegalese coast. As a difference with traditional satellite-derived bathymetry methods based on water colour, a wave-based approach allows estimations in turbid areas and relatively deep waters, which suggest that the two approaches are complementary and should be used in combination to cover coastal environments in their diversity. The new possibility offered by this regional coastal atlas opens the door to increased research and planning capabilities and sets an example that can be applied to the rest of the world. • S2Shores SDB algorithm used to estimate bathymetry from Sentinel-2 MSI image bands. • Depth estimates spanning 4000 km along the West African coast compared to GEBCO. • Maximum detecable depth of 35 m is 2.5 times deeper than colour-based SDB methods. • Shallow features are well reproduced, such as underwater dunes and ebb delta lobes. • S2Shores opens the door to increased research and planning capabilities in the region. [ABSTRACT FROM AUTHOR]

Abstract: Comparison of bathymetric data on short time scales (1959–2008) is used to provide new insights into the modern sedimentary dynamics of the Cap Lopez Canyon (Gabon, West Africa). The canyon head evolution is characterized by a north–eastward lateral migration of ~180m between 1959 and 2008. The evolution of the coastline position over the same period highlights the strong relationship between the probable increase of the longshore transport, related to the smoothing of the coast and the morphological evolution of the canyon head. Lateral migration of the thalweg from the inner bend to the outer bend is estimated between 77 and 190m (or between 1.6 and 3.8m/year), leading to an increase of the sinuosity (from 1–1.5 in 1959 to 1.3–3.6 in 2008). The migration of the thalweg is associated with strong erosion on the outer bends (up to 60m) and sediment deposition on the inner bends (up to 25m). Both the absence of overbank deposits and the developing point-bar morphology may reflect that equilibrium flows are the most frequent flows encountered in the Cap Lopez Canyon. Although erosion of the outer bends is the result of slope failures and steady erosional processes, our study suggests that erosion related to the transit of sediment gravity flows would be the predominant process. [Copyright &y& Elsevier]