Search

The Heavy-Ion Fusion Accelerator Research Program at Lawrence Berkeley Laboratory has proposed building a 10 MeV induction linac systems experiment, ILSE, to investigate accelerator physics and beam manipulations which are needed or desirable for an induction linac driver. This paper describes the experiments proposed for ILSE: transverse beam combining, drift compression, bending of space-charge-dominated beams, final focus, recirculation, and some studies of beam propagation in the environment of the reactor chamber.

An injector is being developed at LBL (Lawrence Berkeley Laboratory) that would serve as the front end of a scaled induction linac accelerator technology experiment in heavy ion fusion. The ion mass being used is in the range 10-18. It is a multi-beam device intended to accelerate up to 2 MeV with 500 mA in each beam. The first half of the accelerating column has been built and experiments with one carbon beam are underway at the 1 MeV level. >

Heavy ion fusion requires high current density, low‐emittance ion sources that are reliable and long lived. We report experimental and simulation results on the performance of carbon arc ion sources intended for use in a scaled induction linac experiment. These sources use a planar electrostatic plasma switch to prevent plasma from entering the extraction gap before the extraction voltage pulse is applied. This provides good beam optics for short pulse extraction. Measurements of current density and emittance are presented. Both double‐slit and channel plate‐pepper pot techniques are used for emittance measurement. Data presented are from a compact three‐arc source with plasma coupling of the cathodes. Data on lifetime and multiple arc triggering are also presented. The plasma switch performance has been modeled with a 2D explicit electrostatic particle‐in‐cell code. Results showing plasma shutoff phenomena and behavior during extraction are presented. A 2D steady‐state ion flow model is also used to pred...

We report on three experiments performed in connection with the 2MV electrostatic quadrupole (ESQ) injector under construction at Lawrence Berkeley Laboratory. Scaled experiments have been conducted to study possible beam emittance growth due to beam aberrations in an ESQ injector. The experiment uses the SBTE (Single Beam Transport Experiment) accelerator system, quarter-scale ESQ set-up and a potassium ion diode source. Measured emittance growth changes significantly with variations in current and diode energy, in good agreement with theoretical predictions. In addition, beam transport experiments were performed in a 1MV axisymmetric electrostatic aperture column using a zeolite 1″ diameter potassium ion source. Experimental measurements in good agreement with 2-1/2D simulations showed that low-emittance beams can be produced in axisymmetric structures. Finally, ESQ breakdown voltage tests without beam were performed at up to two times the quadrupole working voltage.