Search

The third generation of the BeiDou navigation satellite system (BDS-3) can transmit five-frequency signals. The real-time satellite clock offset of BDS-3 is typically generated utilizing the B1I/B3I combination with the ambiguity-float solutions. By conducting the ambiguity resolution (AR), the reliability of the satellite clock offset can be improved. However, the performance of BDS-3 ambiguity-fixed real-time satellite clock offset with B1C/B2a signals remains unknown and unrevealed. In this contribution, the performance of the BDS-3 ambiguity-fixed satellite clock offset with the new B1C/B2a signals is investigated. One week of observation data from 85 stations was used to perform ambiguity-fixed satellite clock offset estimation. For B1I/B3I and B1C/B2a signals, the wide-lane (WL) uncalibrated phase delay (UPD) on the satellite end is fairly stable for one day, while the narrow-lane (NL) UPD standard deviation (STD) amounts to 0.122 and 0.081 cycles, respectively. The mean ambiguity fixing rate is 80.7% and 78.0% for these two signal combinations, and the time to first fix (TTFF) for the B1C/B2a signals is remarkably shorter than that of the B1I/B3I signals. The STDs of the ambiguity-float and -fixed satellite clock offsets are 0.033 and 0.026 ns, respectively, for the B1I/B3I combination, and it is reduced to 0.024 and 0.023 ns for B1C/B2a signals, respectively. Using the estimated UPD and clock offset products, the positioning performance of the kinematic Precise Point Positioning (PPP)-AR results amounts to 1.56, 1.23, and 4.46 cm in the east, north, and up directions for B1I/B3I signals, respectively. It is improved to 1.36, 1.16, and 4.25 cm using the products estimated with the B1C/B2a signals, with improvements of 12.8%, 5.7%, and 4.7% in three directions, respectively. The experiments showed that the performances of the ambiguity-fixed satellite clock offsets and the PPP-AR results using B1C/B2a signals are better than those of B1I/B3I. [ABSTRACT FROM AUTHOR]

The satellite clocks used in the BeiDou-2 satellite navigation System (BDS) are Chinese self-developed Rb atomic clocks, and their performances and stabilities are worse than GPS and Galileo satellite clocks. Due to special periodic noises and nonlinear system errors existing in the BDS clock offset series, the GPS ultra-rapid clock model, which uses a simple quadratic polynomial plus one periodic is not suitable for BDS. Therefore, an improved prediction model for BDS satellite clocks is proposed in order to enhance the precision of ultra-rapid predicted clock offsets. First, a basic quadratic polynomial model which is fit for the rubidium (Rb) clock is constructed for BDS. Second, the main cyclic terms are detected and identified by the Fast Fourier Transform (FFT) method according to every satellite clock offset series. The detected results show that most BDS clocks have special cyclic terms which are different from the orbit periods. Therefore, two main cyclic terms are added to absorb the periodic effects. Third, after the quadratic polynomial plus two periodic fitting, some evident nonlinear system errors also exist in the model residual, and the Back Propagation (BP) neural network model is chosen to compensate for these nonlinear system errors. The simulation results show that the performance and precision using the improved model are better than that of China iGMAS ultra-rapid prediction (ISU-P) products and the Deutsches GeoForschungsZentrum GFZ BDS ultra-rapid prediction (GBU-P) products. Comparing to ISU-P products, the average improvements using the proposed model in 3 h, 6 h, 12 h and 24 h are 23.1%, 21.3%, 20.2%, and 19.8%, respectively. Meanwhile the accuracy improvements of the proposed model are 9.9%, 13.9%, 17.3%, and 21.2% compared to GBU-P products. In addition, the kinematic Precise Point Positioning (PPP) example using 8 Multi-GNSS Experiment MGEX stations shows that the precision based on the proposed clock model has improved about 16%, 14%, and 38% in the North (N), East (E) and Height (H) components. [ABSTRACT FROM AUTHOR]

The emergence of multiple global navigation satellite systems (multi-GNSS), including global positioning system (GPS), global navigation satellite system (GLONASS), Beidou navigation satellite system (BDS), and Galileo, brings not only great opportunities for real-time precise point positioning (PPP), but also challenges in quality control because of inevitable data anomalies. This research aims at achieving the real-time quality control of the multi-GNSS combined PPP using additional observations with opposite weight. A robust multiple-system combined PPP estimation is developed to simultaneously process observations from all the four GNSS systems as well as single, dual, or triple systems. The experiment indicates that the proposed quality control can effectively eliminate the influence of outliers on the single GPS and the multiple-system combined PPP. The analysis on the positioning accuracy and the convergence time of the proposed robust PPP is conducted based on one week's data from 32 globally distributed stations. The positioning root mean square (RMS) error of the quad-system combined PPP is 1.2 cm, 1.0 cm, and 3.0 cm in the east, north, and upward components, respectively, with the improvements of 62.5%, 63.0%, and 55.2% compared to those of single GPS. The average convergence time of the quad-system combined PPP in the horizontal and vertical components is 12.8 min and 12.2 min, respectively, while it is 26.5 min and 23.7 min when only using single-GPS PPP. The positioning performance of the GPS, GLONASS, and BDS (GRC) combination and the GPS, GLONASS, and Galileo (GRE) combination is comparable to the GPS, GLONASS, BDS and Galileo (GRCE) combination and it is better than that of the GPS, BDS, and Galileo (GCE) combination. Compared to GPS, the improvements of the positioning accuracy of the GPS and GLONASS (GR) combination, the GPS and Galileo (GE) combination, the GPS and BDS (GC) combination in the east component are 53.1%, 43.8%, and 40.6%, respectively, while they are 55.6%, 48.1%, and 40.7% in the north component, and 47.8%, 40.3%, and 34.3% in the upward component. [ABSTRACT FROM AUTHOR]

[Display omitted] • The long-term performance of GLONASS satellite clocks were revealed for the first time. • The periodic terms existed in the clock are detected. • The comparison between GLONASS and other GNSS satellite clock is conducted. The cesium atomic clock installed on the GLObal NAvigation Satellite System (GLONASS) is a key piece of equipment. However, its performance is easily affected by the external environment and its physical characteristics. Therefore, it is essential to evaluate the long-term performance of the clock. In this study, using eight years of continuous GLONASS precise satellite clock offset products, the long-term performance of GLONASS satellite clocks is revealed for the first time. The results showed that the mean number of phase and frequency jumps for one satellite clock in one year were 0.29 and 0.19, respectively. The fitting precision, which is the standard deviation of the fitting residuals, was 0.88 nanoseconds (ns). Except for the R06 satellite clock, the first or second period was 11.24 h in the clock offset. In terms of clock stability, the short-term clock offset prediction accuracy was 0.52 ns, the frequency stability at 1000 and 10000 s was 4.03 × 10-13 and 1.01 × 10-13, respectively. Both the short-term clock offset prediction accuracy and frequency stability were inferior to those of the rubidium atomic clock of the Global Positioning System (GPS) Block IIF satellites, the second-generation BeiDou Navigation Satellite System (BDS-2), Quasi-Zenith Satellite System (QZSS), and Galileo Passive Hydrogen Maser (PHM). The mean switching number for each GLONASS satellite clock was 0.27 per year. Furthermore, the R15 satellite clock, maybe owing to its hardware noise, delivered the poorest performance among those of all the GLONASS satellite clocks. [ABSTRACT FROM AUTHOR]