Search

Abstract: A concept for a shaped first wall for ITER is presented. While keeping most features of the 2004 FDR wall (modules segmentation, plasma facing components technologies, plasma facing material), this concept provides protection of the lateral faces of the first wall panels against the intense parallel heat flux coming from the plasma. Excessive beryllium temperatures at the panel edges are avoided during regular operation. The intense heat flux at the top of the vessel is accounted for and protection is provided against the shine thru heat flux. Start-up and ramp down using the wall as a limiter is possible for up to 7.5MW, both inboard and outboard. This is rendered possible by the use of 5MW/m2 technology panels for 40% of the panels. [ABSTRACT FROM AUTHOR]

• Successful high heat flux test results of ITER First Wall mock-ups after neutron irradiation • High heat flux testing of actively cooled mock-ups manufactured with the relevant technologies in relevant geometry to the ITER First Wall, by the suppliers involved in the series production for ITER • High heat flux testing of neutron-irradiated beryllium flat tiles with hypervapotron heat sink • Details of high heat flux test by electron beam facility, JUDITH facility and details of neutron irradiation in the fission reactor, HFR Eight mock-ups imitating the ITER Enhanced Heat Flux First Wall panel were subjected to thermal fatigue test after neutron irradiation at two dose levels, ≈0.1 dpa and ≈0.5 dpa. All the mock-ups successfully withstood repeated thermal fatigue loads up to 4.7 MW/m2. The test results confirmed the performance of mock-ups in the tested condition, specifically the design and manufacturing technologies of the suppliers of two domestic agencies in charge of the series production. [ABSTRACT FROM AUTHOR]