Search

Graphical abstract Abstract The first objective of this study was to optimize a supersaturatable self-nanoemulsifying drug delivery system (S-SNEDDS) containing silymarin through the investigation of the single and synergistic effect of either SNEDDS or a precipitation inhibitor on dissolution efficiency (DE) of silymarin. The bioavailability and hepatoprotective activity of S-SNEDDS were then compared to those of a branded product (Legalon®, Meda). SNEDDS containing silymarin was developed by titration technique, and Poloxamer 407 was selected as the optimal precipitation inhibitor by using casting film and solvent-shift method. The interaction of silybin (the major active constituent of silymarin) and the polymer was then determined by differential scanning calorimetry, powder X-ray diffractometry (PXRD), Fourier transforms infrared spectroscopy and 1H NMR analysis. The combination of two techniques including SNEDDS and addition of 10% of Poloxamer 407 remarkably increased DE 4h (88.28%) compared to the reference product (6.41%). The relative bioavailability of S-SNEDDS versus Legalon® was about 760%. The hepatoprotective activity of S-SNEDDS in CCl 4 -induced mice was also superior to the commercial product in declining both the levels of serum transaminases (ALT, AST) and lipid peroxidation as well as glutathione and superoxide dismutase (SOD) activities under tested doses calculated as silybin (10, 25 and 50 mg/kg). These biopharmaceutical and pharmacological advantages of S-SNEDDS indicated prospects in the development of a novel product that offers lower strength of silymarin while enhancing therapeutic outcomes. [ABSTRACT FROM AUTHOR]

The objective of this study was to prepare and evaluate some physiochemical and biopharmaceutical properties of bitter taste masking microparticles containing azithromycin loaded in dispersible tablets. In the first stage of the study, the bitter taste masking microparticles were prepared by solvent evaporation and spray drying method. When compared to the bitter threshold (32.43 µg/ml) of azithromycin (AZI), the microparticles using AZI:Eudragit L100 = 1:4 and having a size distribution of 45–212 µm did significantly mask the bitter taste of AZI. Fourier transform infrared spectroscopy (FTIR), and proton nuclear magnetic resonance spectroscopy ( 1 H NMR) proved that the taste masking of microparticles resulted from the intermolecular interaction of the amine group in AZI and the carbonyl group in Eudragit L100. Differential scanning calorimeter (DSC) analysis was used to display the amorphous state of AZI in microparticles. Images obtaining from optical microscopy and scanning electron microscopy (SEM) indicated the existence of microparticles in regular cube shape with many layers. In the second stage, dispersible tablets containing microparticles (DTs-MP) were prepared by direct compression technique. Stability study was conducted to screen pH modulators for DTs-MP, and a combination of alkali agents (CaCO 3 :NaH 2 PO 4 , 2:1) was added into DTs-MP to create microenvironment pH of 5.0–6.0 for the tablets. The disintegration time of optimum DTs-MP was 53 ± 5.29 s and strongly depended on the kinds of lubricant and diluent. The pharmacokinetic study in the rabbit model using liquid chromatography tandem mass spectrometry showed that the mean relative bioavailability (AUC) and mean maximum concentration (C max ) of DTs-MP were improved by 2.19 and 2.02 times, respectively, compared to the reference product (Zithromax®, Pfizer). [ABSTRACT FROM AUTHOR]

The study first aimed to apply a design of experiment (DoE) approach to investigate the influences of excipients on the properties of liquid self-microemulsifying drug delivery system (SMEDDS) and SMEDDS loaded in the pellet (pellet-SMEDDS) containing l -tetrahydropalmatine (l-THP). Another aim of the study was to compare the bioavailability of l-THP suspension, liquid SMEDDS and pellet-SMEDDS in the rabbit model. By using Central Composite Face design (CCF), the optimum ratio of Capryol 90, and S mix `(Cremophor RH 40: Transcutol HP) in the formulation of SMEDDS was determined. This optimum SMEDDS was absorbed on the solid carrier (Avicel or Aerosil) for the preparation of pellet-SMEDDS by extrusion and spheronization method. The ANOVA table indicated that Avicel was more effective than Aerosil, the traditional solid carrier, in both terms of preservation of dissolution rate of l-THP from the original SMEDDS and pelletization yield. Results obtained from scanning electron microscopy (SEM) indicated that the existence of liquid SMEDDS droplets on the surface of pellet-SMEDDS was due to the absorption on Avicel. The powder X-ray diffractometry proved the amorphous state of l-THP in pellet-SMEDDS. Pharmacokinetic study in the rabbit model using liquid chromatography tandem mass spectrometry showed that the SMEDDS improved the oral bioavailability of l-THP by 198.63% compared to l-THP suspension. Besides, pharmacokinetics study also proved that the mean relative bioavailability (AUC) and mean maximum concentration (C max ) of pellet-SMEDDS were not significantly different from the original liquid SMEDDS (p > 0.05). [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the miscibility of cellulose derivatives to improve the release rate and stability of microparticles containing the weakly basic drug itraconazole (ITZ). We also investigated the effect of some organic acids on the microenvironmental pH (pH m) and the release rate of ITZ from the cellulose-based microparticles. The synergistic effect of cellulose-based microparticles and pH m modulators on the bioavailability of ITZ compared with the reference product was investigated in a rabbit model. Differential scanning calorimetry and Fourier-transform infrared spectroscopy (FTIR) analysis showed that ITZ, hydroxypropyl methylcellulose, and hydroxypropyl methylcellulose phthalate were miscible at a ratio of 1.5:3:1 (w /w/w), and the stability of the microparticles was maintained for 6 months under accelerated conditions. In addition, X-ray diffraction, FTIR, and scanning electron microscopy were used to characterize the properties of the microparticles. Through the titration technique and determination of pH m , the combination of fumaric acid and maleic acid (1:2, w /w) was found to be the most effective pH m modulator for microparticles. The integration of cellulose-based microparticles and pH m modulators showed a synergistic effect on the flux and relative bioavailability of ITZ and its active metabolite OH-ITZ (182.60 % and 217.67 %, respectively) when compared with the reference product. [ABSTRACT FROM AUTHOR]

Objectives Rebamipide, a novel anti-ulcer agent, is listed in biopharmaceutics classification class IV because of its low aqueous solubility and permeability. Consequently, the bioavailability of rebamipide is under 10% in humans. The aim of this study was to increase the solubility and determine the effect of solubility enhancement on the bioavailability and efficacy of rebamipide (RBM). Methods After taking into account the physiochemical properties of RBM (solubility, melting point, dosage etc.), solid dispersion was chosen as the solubility enhancement method. A rebamipide solid dispersion system containing the drug, l-lysine, PVP-VA 64 and poloxamer 407 was obtained from a spray-drying method. Solubility enhancement of RBM from the solid dispersion was determined by a dissolution test in 900 ml at pH 1.2. The bioavailability and efficacy of RBM solid dispersion were evaluated in a rat model. Key findings The aqueous solubility of RBM was improved 62.17 times by solid dispersion. The oral bioavailability of the drug was also increased 1.74-fold from solid dispersion compared with the reference product in a rat model. With regard to the anti-ulcer effect, the percentage inhibition of the solid dispersion was 2.71 times higher than that of the reference product in the ulcer-induced rat model. Conclusions A solid dispersion of rebamipide was successfully formulated using the spray-drying method. Bioavailability and efficacy of rebamipide were increased significantly by solubility enhancement of the drug. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the effect of a surfactant on the liquid-liquid phase separation, dissolution, diffusion, and the oral bioavailability of a weakly basic drug (l-tetrahydropalmatine; l-THP) from an amorphous solid dispersion (ASD). The carrier used in the ASD was optimized by the application of casting film, solvent shift, and pH shift methods. The interaction between the optimized carrier (HPMCP) and l-THP was then evaluated by Fourier transform-infrared spectroscopy and powder X-ray diffraction. The impact of the surfactant on ASD prepared by the spray-drying method was evaluated by both in vitro and in vivo studies. The results of in vitro studies, including liquid-liquid phase separation, drug diffusion, and pH-shift dissolution, indicated that the addition of a surfactant at a certain concentration below critical micelle concentration to ASD caused the precipitation of and a reduction in the membrane diffusion of l-THP in pH 6.8. This observation was confirmed in an in vivo study in which the drug concentration of l-THP in rabbit plasma was determined by the LC-MS/MS analysis method. Then the absolute and relative bioavailability of l-THP was calculated from the obtained pharmacokinetic parameters. Specifically, the addition of 1.5% surfactant (Poloxamer 188) to the binary ASD decreased the relative bioavailability of l-THP by approximately 2.4 times compared with the original binary ASD. Besides, the study proved that l-THP had low absolute bioavailability (around 1.24%), and the application of binary ASD was meaningful in enhancing the oral bioavailability of l-THP by around 334.77% compared to the raw material. The study is expected to provide a better understanding of how different dosage forms influence the bioavailability of l-THP, thereby allowing the selection of the optimal approach for this weakly basic drug. [Display omitted] [ABSTRACT FROM AUTHOR]

This research aims to develop bitter taste-masking microcapsules containing azithromycin (AZI) by a simpler and familiar method, fluid-bed coating technology, in comparison with Zithromax®. Cores of microcapsules, AZI microparticles, were prepared by fluid-bed granulation, then taste-masking polymer was covered on by fluid-bed coating technique. Eudragit L100, Eudragit RL100, and ethyl cellulose in single and combined with Eudragit L100 and Eudragit E100 were used as taste-masking polymers. The obtained microcapsules were characterised by taste-masking ability, in vitro release, SEM, coating thickness, and coating efficiency. Combination of ethyl cellulose and Eudragit E100 (3:1) in coating thickness of 45.13 ± 2.12% w/w prevents AZI release from microcapsules below bitter taste threshold (1.78 ± 1.17 µg/ml). Bioavailability of powders containing AZI microcapsules and pH modulators (50 mg Na3PO4 and 35 mg Mg(OH)2) was not significantly different from the reference product (Zithromax®, Pfizer, New York, NY) in the rabbit model (p > 0.05). These results support the possibility of developing a generic product containing AZI. [ABSTRACT FROM AUTHOR]