Search

Background: Efficient laboratory service is the cornerstone of modern health care systems. Scientific innovations have contributed to substantial improvements in the field of laboratory science, but errors still prevail. These errors are classified as preanalytical, analytical and postanalytical, depending upon the time of presentation. Methods: The data for 67,438 routine venous blood specimens were scrutinized, and errors were documented over the period of 1 year in the clinical biochemistry laboratory of Govind Ballabh Pant Hospital in Delhi, India. Results: Preanalytical errors were most common, with a frequency of 77.1% followed by postanalytical 15% and analytical 7.9%, respectively. Conclusions: Our study illustrates the importance of proper venipuncture procedures, analytical expertise and correct transcription of numerical data for precise and accurate reporting of results to clinicians. There is an urgent need for close inter-departmental cooperation to meet the goal of ensuring patient well being. Clin Chem Lab Med 2010;48:63–6. [ABSTRACT FROM AUTHOR]

Estuarine sediments are major reservoirs for the metals. Distribution and mobility of metals within estuaries depends strongly on their specific chemical form. In the present study, surface sediments from Zuari estuary, Goa were analysed by a sequential procedure for Fe, Mn, Cu, Zn, Cr and Co to determine their distribution in five geochemical phases (Exchangeable, carbonate, Fe–Mn oxide (reducible) organic bound (oxidisable) and residual). The total metal content, sand, silt, clay and organic carbon were also determined of the surface sediments. The total metal contents were found to be greater than the background concentrations of average shale values as well as to that of earlier studies indicating enrichment probably due to the anthropogenic origin of metals. The results obtained from sequential procedure showed that among the studied elements, Mn and Co are potentially available in the bioavailable fractions (exchangeable, carbonate and Fe–Mn oxide bound fractions) indicating their importance in toxicity whereas rest of the metals viz. Fe, Cu, Zn and to some extent Cr are largely available in residual phase although they are available in other fractions. The main source of metals to the estuary is mining and its associated activities in the study area. Chemical speciation by sequential extraction procedure has helped in assessing the mobility, bioavailability, diagenesis and toxicity of metals and hence giving a better insight into the ultimate fate of pollutants, which are introduced into the estuarine environment. To understand the risk of the metals to the sediment dwelling organisms the data were compared with the Sediment Quality Values (SQV) using SQUIRT. Also, correlation and Factor analysis were carried out to understand the associations of metals in the different fractions with sand, silt, clay, organic carbon and with other metals. [ABSTRACT FROM AUTHOR]

Flavobacterium columnare is an important pathogen of freshwater fishes often causing high mortality. Seven strains of F. columnare have been isolated from gill necrosis, skin lesions and internal organs of Catla catla, Labeo rohita, Cirrhinus mrigala, Carassius auratus, Anabas testudineus and Clarias batrachus and characterized by biochemical reactions and serological tests viz indirect enzyme-linked immunosorbent assay (ELISA), Dot-ELISA, agglutination test. All the strains showed binding to Congo red dye as well as hemolysis. All the seven strains were susceptible to amikacin, gentamycin and ofloxacin. In vivo LD50 dose of virulent strain MS2 was found to be 6 × 104 CFU/mL after experimental infection to L. rohita. Serologically all the seven strains showed a positive result to agglutination, Dot-ELISA and indirect ELISA. The agglutination titer was found to be in the range of 256-131,072. The lysozyme activity of hyperimmune sera was found to be 39.37 ± 0.80 units/mL. This is the first extensive study that report about the various strains of F. columnare from freshwater fishes of Eastern India and their differentiation by biochemical and serological methods. [ABSTRACT FROM AUTHOR]

Objective:To study associations of size and body proportions at birth, and growth during infancy and childhood, to body composition and cardiovascular disease (CVD) risk factors at the age of 6 years.Design:The Pune Maternal Nutrition Study, a prospective population-based study of maternal nutrition and CVD risk in rural Indian children.Methods:Body composition and CVD risk factors measured in 698 children at 6 years were related to body proportions and growth from birth.Measurements:Anthropometry was performed every 6 months from birth. At 6 years, fat and lean mass (dual X-ray absorptiometry) and CVD risk factors (insulin resistance, blood pressure, glucose tolerance, plasma lipids) were measured.Results:Compared with international references (NCHS, WHO) the children were short, light and thin (mean weight <−1.0 s.d. at all ages). Larger size and faster growth in all body measurements from birth to 6 years predicted higher lean and fat mass at 6 years. Weight and height predicted lean mass more strongly than fat mass, mid-upper arm circumference (MUAC) predicted them both approximately equally and skinfolds predicted only fat mass. Neither birthweight nor the ‘thin-fat’ newborn phenotype, was related to CVD risk factors. Smaller MUAC at 6 months predicted higher insulin resistance (P<0.001) but larger MUAC at 1 year predicted higher systolic blood pressure (P<0.001). After infancy, higher weight, height, MUAC and skinfolds, and faster growth of all these parameters were associated with increased CVD risk factors.Conclusions:Slower muscle growth in infancy may increase insulin resistance but reduce blood pressure. After infancy larger size and faster growth of all body measurements are associated with a more adverse childhood CVD risk factor profile. These rural Indian children are growing below international ‘norms’ for body size and studies are required in other populations to determine the generalizability of the findings.International Journal of Obesity (2007) 31, 1534–1544; doi:10.1038/sj.ijo.0803679; published online 24 July 2007 [ABSTRACT FROM AUTHOR]

Background: The tolerability and efficacy of single dose albendazole (400 mg), diethylcarbamazine citrate (DEC) (6 mg/kg bodyweight) or co-administration of albendazole (400 mg) + DEC (6 mg/kg bodyweight) was studied in 54 asymptomatic Wuchereria bancrofti microfilaraemic volunteers in a double blind hospital-based clinical study. Results: There was no significant difference in the overall incidence of adverse reactions between the three drug groups [42.1% (albendazole), 52.9% (DEC) and 61.1% (albendazole + DEC); P > 0.05]. The mean score of adverse reaction intensity did not differ significantly between the DEC and albendazole + DEC groups. However, the values in these two groups were significantly higher compared to that of albendazole alone [1.8 ± 3.0 (albendazole) vs. 5.6 ± 7.1 (DEC), 6.7 ± 6.6 (albendazole + DEC); P < 0.05]. By day 360 post-therapy there was no significant difference between the three drug groups in relation to the clearance of microfilaria [26.3% (albendazole), 17.6% (DEC), 27.8% (albendazole + DEC)], reduction in geometric mean parasite density [94.7% (albendazole), 89.5% (DEC), 95.4% (albendazole + DEC)] or reduction in filarial antigenaemia [83% (albendazole), 87% (DEC), 75% (albendazole + DEC)]. Furthermore, there was a significant decrease in mean geometric parasite density (P < 0.05) as well as antigenaemia optical density values (P < 0.01) between pre-therapy levels and day 360 post-therapy in all three groups. Conclusions: This study has shown that single dose albendazole (400 mg) has similar efficacy in the clearance of microfilaria as that of DEC or the co-administration of the two drugs. The results strengthen the rationale of using albendazole for mass annual single dose administration for the control of transmission of lymphatic filariasis. [ABSTRACT FROM AUTHOR]

The article presents a study which explored fenthion's acute toxicity on the biochemical composition of freshwater lamellibranch mollusc Indonaia caeruleus. The study collected I. caeruleus from Godavari river in India, which undergone biochemical analyses. Results indicate that lethal and nominal fenthion exposure induced changes in glycogen content of all I. Caeruleus' body parts.

Simple Summary: Spittlebugs produce foam in either nodes or internodes on stems of Theporsia purpurae (100%) and Mimosa pudica (100%), to establish and protect their young. However, this reduces the photosynthetic capacity of the plants. The surface area of the foam is higher for Lawsonia inermis (18.15 cm2) than other plants. The number of nymphs in each piece of foam varied from 1 to 3 in this study. The foam was cooler than the external environment for all the tested plants (p < 0.0001), except T. purpurae and M. pudica (p > 0.05). The biofoam consists of carbohydrates, amino acids, proteins and fatty acids. A saturated fatty acid, octadecanoic acid, was more abundant (88.33%) in the biofoam of Poophilus costalis. The biofoam showed strong antibacterial activity against Staphylococcus aureus than that of other species, similar to that of chloramphenicol against Pseudomonas fluorescens. The foam produced by nymphs of Poophilus costalis on eleven different host plants belonging to eight families on St. Xavier's College campus in India was studied over five months. The chemical composition and antimicrobial activity of these biofoams were investigated. The results revealed that P. costalis preferred Theporsia purpurea and Mimosa pudica for laying their eggs and producing foam, over the other tested plants. P. costalis produce their foam on either nodes or internodes on monocotyledons (30%) (p < 0.05), whereas on dicotyledons, they produce more foam on the stems (63.8%) than on the leaves (6.2%) (p < 0.01). The number of nymphs in each piece of foam from P. costalis varied from 1 to 3 (mean = 1.8 per plant). They produced their foam (5.7 to 45.2 cm) from the ground level on a plant. The length and breadth of a piece of foam ranged from 1.0 to 3.9 cm and 0.6 to 4.7 cm, respectively. The foam tended to be cooler than the environment. Qualitative profiling showed that the foam consists of carbohydrates, including maltose; trypsin; amino acids; protease. The foam was also analyzed using a spectrophotometer, Fourier transform infrared spectroscopy (FT-IR), gas chromatography–mass spectroscopy (GC-MS), and high-performance liquid chromatography (HPLC). The antimicrobial activity of the biofoam was the greatest against Staphylococcus aureus, the growth of which was reduced by 55.9 ± 3.9%, suggesting that the foam could be used as an antimicrobial product. However, no activities were observed against Fusarium oxysporum and Candida albicans. [ABSTRACT FROM AUTHOR]