Search

The outstanding properties such as large surface area, diverse structure, and accessible tunnels and cages make metal organic frameworks (MOFs) attractive as novel separation media in separation sciences. However, the utilization of MOFs in EKC has not been reported before. Here we show the exploration of zeolitic imidazolate framework-8 (ZIF-8), one of famous MOFs, as the pseudostationary phase (PSP) in EKC. ZIF-8 nanocrystals were used as the PSP through dispersing in the running buffer (20 mM phosphate solution containing a 1% v/v methanol (pH 9.2)) to enhance the separation of the phenolic isomers (p-benzenediol, m-benzenediol, o-benzenediol, m-nitrophenol, p-nitrophenol, and o-nitrophenol). ZIF-8 nanocrystals in the running buffer were negatively charged, and interacted with the phenolic hydroxyl groups of the analytes, and thus greatly improved the separation of the phenolic isomers. Inclusion of 200 mg L-(1) ZIF-8 in the running buffer as the background electrolyte gave a baseline separation of the phenolic isomers within 4 min. The relative standard deviations for five replicate separations of the phenolic isomers were 0.2-1.1% for migration time and 4.5-9.7% for peak area. The limits of detection varied from 0.44 to 2.0 mg L-(1) . The results show that nanosized MOFs are promising for application in EKC.

A room temperature ionic liquid (RTIL)-mediated nonhydrolytic sol-gel (NHSG) protocol was explored for the fabrication of new molecularly imprinted silica-based hybrid monoliths for chiral separation of a basic template zolmitriptan by CEC. The RTIL-mediated NHSG protocol involved free-radical copolymerization and NHSG process. Three carboxylic acids (trifluoromethyl acrylic acid, cinnamic acid, and methacrylic acid (MAA)) were examined as both the functional monomers and the catalysts for the NHSG condensation of methacryloxypropyltrimethoxysilane (MPTMS) to form silica-based framework. RTIL was incorporated to reduce gel shrinkage and also to act as the pore template. The effects of carboxylic acids and RTIL on the performance of the silica-based hybrid molecularly imprinted polymer (MIP) monoliths were investigated in detail to realize excellent chiral recognition and to give new insights into the mechanism of the RTIL-mediated NHSG strategy. Excellent chiral separation of (R)/(S)-zolmitriptan was achieved when the molar ratio of MAA to MPTMS was 1:4 and 1:2 with RTIL involved. The synergism of the free-radical copolymerization of the C=C bond of carboxylic acids and MPTMS with the NHSG condensation of MPTMS catalyzed by the carboxylic acids was demonstrated. The incorporation of RTIL increased porosity, and hence improved selectivity of the prepared hybrid monoliths.

Convenient reading out and/or determination of ionic strength (IS) is of great significance for both scientific research and real life applications. We presented here a novel method for the rapid and sensitive IS assay based on the electrolyte-induced sensitive wavelength blueshifts of the reflection spectra of polyacrylate capped Fe3O4 magnetic photonic crystals (PA-Fe3O4-MPCs). For HCl, MgSO4 and the common electrolytes corresponding to the salinity of seawater (including NaCl, KCl, MgCl2, CaCl2, Na2SO4 and their mixtures), the PA-Fe3O4-MPCs displayed wavelength blueshifts identical to the total IS of the aqueous solutions, regardless of the kind of above-mentioned electrolytes in the solutions. Besides, the PA-Fe3O4-MPCs exhibited relatively high sensitivity (an average of 294 nm L mmol(-1) in the range of 0.05-0.30 mmol L(-1), and an even higher value of 386 nm L mmol(-1) at 0.05-0.15 mmol L(-1)) and fast response (within 8 s) to the IS of aqueous solutions. The relative standard deviation (RSD) for IS (NaCl, 0.1 mmol L(-1)) was 4.4% (n = 5). The developed method was applied to determine the salinity of seawater samples, and the determined results were validated by the traditional standard chlorinity titration and electric conductimetry method. The recoveries were in the range of 92-104%. The proposed PA-Fe3O4-MPCs based reflectometry method would have great potential for IS and salinity assays.

The racemic naproxen was selectively recognized by capillary electrochromatography (CEC) on an (S)-naproxen-imprinted monolith, which was prepared by an in situ thermal-initiated polymerization. The recognition selectivity of a selected monolith strictly relied on the CEC conditions involved. The factors that influence the imprinting selectivity as well as the electroosmotic flow (EOF), including the applied voltage, organic solvent, salt concentration and pH value of the buffer, column temperature, and surfactant modifiers were systematically studied. Once the column was prepared, the experiment results showed that the successful chiral recognition was dependent on CEC variables. For example: the recognition could be observed in acetonitrile and ethanol electrolytes, while methanol and dimethyl sulfoxide (DMSO) electrolytes had no chiral recognition ability. The buffer with pH values of 2.6 or 3.0 at a higher salt concentration had chiral recognition ability. Column temperatures of 25-35 degrees C were optimal. Three surfactants, sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), and polyoxyethylene sorbitan monolaurate (Tween 20), can improve the recognition. Baseline resolution was obtained under optimized conditions and the column efficiency of the later eluent (S)-naproxen was 90 000 plates/m.

Rapid and selective enrichment of phosphopeptides from complex biological samples is essential and challenging in phosphorylated proteomics. We present the direct growth of the ultrathin YPO4 shell on the surface of polyacrylate capped secondary Fe3O4 microspheres (PA-Fe3O4@YPO4) for the rapid and selective trapping phosphopeptides from complex samples. The prepared PA-Fe3O4@YPO4 could be rapidly harvested in the presence of an applied magnetic field and easily re-dispersed in solutions after removing the external magnet. The ultrathin YPO4 shell on super-hydrophilic PA-Fe3O4 has the advantages of fast adsorption/desorption dynamics and low non-specific adsorption, thus trapping of phosphopeptides from the tryptic digests mixture of β-casein/BSA with molar ratio of 1/300 is achieved in 20s adsorption/desorption time. Two phosphopeptides can still be detected with a signal to noise ratio (S/N) over 3 when the amount of β-casein was as low as 8 fmol.

Metal–organic framework MIL-53(Al) was explored as the stationary phase for high-performance liquid chromatographic separation of position isomers using a binary and/or polar mobile phase. Baseline separations of xylene, dichlorobenzene, chlorotoluene and nitrophenol isomers were achieved on the slurry-packed MIL-53(Al) column with high resolution and good precision. The effects of mobile phase composition, injected sample mass and temperature were investigated. The separation of xylene, dichlorobenzene, chlorotoluene and nitrophenol isomers on MIL-53(Al) were controlled by entropy change.

A specific resonance light scattering bioassay for homocysteine is developed on the basis of target-involved assembly of polyethyleneimine-capped Ag-nanoclusters. The bioassay permits discriminating homocysteine from cysteine, glutathione and other amino acids, and allows sensitive and selective detection of homocysteine with a detection limit of 42 nM.

Persistent-luminescence nanoparticles (PLNPs) are promising as a new generation of photoluminescent probes for detection of biomolecules and bioimaging. Here we report a fluorescence resonance energy transfer (FRET) inhibition assay for α-fetoprotein (AFP) excreted during cancer cell growth using water-soluble functionalized PLNPs based on Eu2+- and Dy3+-doped Ca1.86Mg0.14ZnSi2O7. Polyethyleneimine-coated PLNPs were conjugated with AFP-antibody-coated gold nanoparticles as a sensitive and specific persistent photoluminescence probe for detection of AFP in serum samples and imaging of AFP excreted during cancer cell growth. Such PLNPs do not contain toxic heavy metals. Their long-lasting afterglow nature allows detection and imaging without external illumination, thereby eliminating the autofluorescence and scattering light from biological matrixes encountered under in situ excitation.

A facile strong inorganic acid-initiated methacrylate polymerization strategy was developed for fabricating monolithic columns at room temperature. The prepared monoliths were characterized by FTIR spectrometry, mercury intrusion porosimeter and SEM, while their performance was evaluated by CEC for the separation of various types of compounds including alkyl benzenes, polycyclic aromatic hydrocarbons, nonsteroidal anti-inflammatory drugs, anilines, and nitrophenol isomers. The column-to-column and batch-to-batch reproducibility for the prepared monoliths in terms of the RSD of EOF flow velocity, retention factor, and the minimum plate height of naphthalene ranged from 3.4 to 12.4%. The fabricated monoliths gave excellent performance for the separation of the test neutral compounds with the theoretical plates of 170 000–232 000 plates per meter for thiourea, and 77 400–112 300 plates per meter for naphthalene. The proposed strong inorganic acid-initiated methacrylate polymerization strategy is a promising alternative for fabricating organic polymer-based monoliths.

We presented a homogeneous heparin-mediated fluorescence anisotropy (FA) assay of antithrombin (AT) based on long-lived luminescent polyethyleneimine capped Mn-doped ZnS (PEI-Mn-ZnS) QDs. The PEI-Mn-ZnS QDs with long lifetime luminescence at 585 nm displayed a very low background of FA value, which was very helpful for FA assaying of large molecules. The medium heparin was crucial for AT determination, and different heparin amounts resulted in different linear range of detection and sensitivity. For example, the limit of detection (LOD) of 0.9 nM AT with a detection linear range from 8.6 nM to 21.5 nM was found when the heparin concentration was 75 μM. The proposed method also exhibited high selectivity over the coexisting or related proteins such as human serum albumin and thrombin.

A gold nanorod (AuNR) based colorimetric probe was reported for the rapid and selective detection of Cu(2+) ions. The probe was fabricated by functionalizing cysteine (Cys) onto AuNR (Cys-AuNR) with an aspect ratio of 2.3. The strong coordination of Cu(2+) with cysteine resulted in a stable Cys-Cu-Cys complex, and induced the aggregation of the colloidal nanorods along with a rapid colour change from blue-green to dark gray. Potential factors affecting the performance of the probe for the detection of Cu(2+) were carefully optimized, including the pH value of the buffer media, the concentration of cysteine, and the kinetics for the coordination of Cu(2+) with Cys-AuNR. Under optimal conditions, the developed colorimetric method gave a linear range of 1-100 μM for Cu(2+), and a detection limit (3s) of 0.34 μM. Moreover, the developed method exhibited excellent selectivity for Cu(2+), and quantitative spike-recoveries from 90% to 107% in environmental water samples. The proposed colorimetric approach can in principle be used to detect other metal ions by functionalizing various specific ligands onto the AuNR that can selectively bind the other target metal ions.