Search

The hybrid technology combines an efficient material‐removal process and implant surface treatment by the laser reducing time of manufacture process compared to currently used machining technologies. It also permits precise structuring of the implant material surface. Six structures of the Ti6Al4V ELI surface were designed and studied how the structure topography prepared with the hybrid technology affected the Escherichia coli adhesion to the surface and viability, as well as the growth, adhesion, and viability of human osteogenic Saos‐2 cells cultured on the investigated surfaces. Results have confirmed that the microtopography of medical titanium alloy plays a beneficial role in bacterial adhesion and viability (number of bacteria found on reference surface: [5.9 ± 0.44] × 106 CFU/ml, sample no. 3: [8.8 ± 0.93] × 104 CFU/ml, and sample no. 5: [1.2 ± 0.23] × 107 CFU/ml; CFU ‐ Colony Forming Unit). All tested structured surfaces enabled good cell attachment and proliferation of Saos‐2 cells (viability of Saos‐2 cells [% of control] for reference surface: 81.93%; sample no. 3: 75% and sample no. 5: 100%). Transcriptome analysis of genes commonly expressed in the process of osseointegration demonstrated that the use of hybrid technology allows designing structures that enhance osseointegration but it should be coupled with other methods of preventing bacterial growth, or with a different strategy to limit microbial colonization with the satisfactory osseointegration potential. [ABSTRACT FROM AUTHOR]

In this article, properties of thermosensitive chitosan hydrogels prepared with the use of chitosan chloride with β-glycerophosphate disodium salt pentahydrate enriched with calcium glycerophosphate are presented and compared with chitosan hydrogels with β-glycerophosphate disodium salt pentahydrate. The study is focused on the determination of hydrogel structure and biological testing of hydrogels with human osteoblasts line Saos-2. The structure of gels was visualized by scanning electron microscopy and was investigated by infrared spectroscopy. The crystallinity of gel structure was determined by X-ray diffraction analysis and thermal effects were determined using differential scanning calorimetry thermograms. [ABSTRACT FROM AUTHOR]

Biological acceptance is one of the most important aspects of a biomaterial and forms the basis for its clinical use. The aim of this study was a comprehensive biological evaluation (cytotoxicity test, bacterial colonization test, blood platelets adhesion test and transcriptome and proteome analysis of Saos-2 cells after contact with surface of the biomaterial) of biomaterials used in spinal and orthopedic surgery, namely, Ti6Al4V ELI (Extra Low Interstitials), its modified version obtained as a result of melting by electron beam technology (Ti6Al4V ELI-EBT), polyether ether ketone (PEEK) and polished medical steel American Iron and Steel Institute (AISI) 316L (the reference material). Biological tests were carried out using the osteoblasts-like cells (Saos-2, ATCC HTB-85) and bacteria Escherichia coli (DH5α). Results showed lack of cytotoxicity of all materials and the surfaces of both Ti6Al4V ELI and PEEK exhibit a significantly higher resistance to colonization with E. coli cells, while the more porous surface of the same titanium alloy produced by electron beam technology (EBT) is more susceptible to microbial colonization than the control surface of polished medical steel. None of the tested materials showed high toxicity in relation to E. coli cells. Susceptibility to platelet adhesion was very high for polished medical steel AISI 316L, whilst much lower for the other biomaterials and can be ranked from the lowest to the highest as follows: PEEK < Ti6Al4V ELI < Ti6Al4V ELI-EBT. The number of expressed genes in Saos-2 cells exposed to contact with the examined biomaterials reached 9463 genes in total (ranging from 8455 genes expressed in cells exposed to ELI to 9160 genes in cells exposed to PEEK). Whereas the number of differentially expressed proteins detected on two-dimensional electrophoresis gels in Saos-2 cells after contact with the examined biomaterials was 141 for PEEK, 223 for Ti6Al4V ELI and 133 for Ti6Al4V ELI-EBT. Finally, 14 proteins with altered expression were identified by mass spectrometry. In conclusion, none of the tested biomaterials showed unsatisfactory levels of cytotoxicity. The gene and protein expression analysis, that represents a completely new approach towards characterization of these biomaterials, showed that the polymer PEEK causes much more intense changes in gene and protein expression and thus influences cell metabolism. [ABSTRACT FROM AUTHOR]

Abstract: The unique properties of thin diamond layers make them perspective candidates for producing advanced micro-electronic devices, coatings for cutting tools and optics. However, due to the highest biocompatibility of carbon resulting from the presence of this element in the human body, it appears to be a potential biomaterial. Carbon, especially in the form of the nanocrystalline diamond film, have found industrial applications in the area of medical implants. The studies of carbon films as coatings for implants in surgery were aimed at the investigations of biological resistance of implants, histopathological investigations on laboratory animals, tests of corrosion resistance, measurements of mechanical properties and a breakdown test in Tyrode''s solution. Different medical implants are covered by Nanocrystalline Diamond Coatings (NCD). NCD forms the barrier diffusion between implant and human environment. The research on NCD proved that diamond layers are biocompatible with living organisms. Diamond Powder Particles (DPP) is an extended surface of NCD. Biological research with diamond powder can answer the basic question: what is the influence of DPP on cells, tissues and organs in human organism? [Copyright &y& Elsevier]