Search

The operational temperature of microbial fuel cell reactors influences biofilm development, and this has an impact on anodic biocatalytic activity. In this study, we compared three microbial fuel cell (MFC) reactors acclimated at 10°C, 20°C and 35°C to investigate the effect on biomass development, methanogenesis and electrogenic activity over time. The start-up time was inversely influenced by temperature, but the amount of biomass accumulation increased with increased temperatures, the 10°C, 20°C and 35°C acclimated biofilms resulted in 0.57, 0.82 and 5.43 g biomass (volatile suspended solids) per litre respectively at 56 weeks of operation. Biofilm build-up on the 35°C anode was further demonstrated by scanning electron microscopy, which showed large aggregations of biomass accumulating on the anode when compared to 10°C and 20°C biofilms. Biomass accumulation had a direct impact on biocatalytic performance, with the maximum power at 35°C after 60 weeks of operation being 2.14 W m(-3) and power densities for the 10°C and 20°C reactors being and 4.29 W m(-3). Methanogenic activity was also shown to be higher at 35°C, with a rate of 10.1 mmol CH(4) biofilm per gram of volatile suspended solid (VSS) per day, compared to 0.28 mmol CH(4) per gram of VSS per day produced at 20°C. These results demonstrate that higher MFC operating temperatures could be detrimental to the biocatalytic performance of electrochemically active bacteria in anodic biofilms due to biomass accumulation with enhanced development of non-electrogenic communities (e.g. methanogens and fermenters), meaning that, over time, psychro- or mesophilic operation can have beneficial effects for the development of electrogenically active populations in the reactor.

Highlights: [•] Anodic helical design and flow characteristics influence MFC performance. [•] High shear rates promote mixing and COD removal. [•] Enrichment under shear conditions promotes biofilm development within the anode. [•] Improved performance follows transition from laminar to turbulent flow. [ABSTRACT FROM AUTHOR]

The electrogenic biofilm and the bio-electrode interface are the key biocatalytic components in bioelectrochemical systems (BES) and can have a large impact on cell performance. This study used four different anodic carbons to investigate electrogenic biofilm development to determine the influence of charge accumulation and biofilm growth on system performance and how biofilm structure may mitigate against pH perturbations. Power production was highest (1.40 W/m3) using carbon felt, but significant power was also produced when felt carbon was open-circuit acclimated in a control reactor (0.95 W/m3). The influence of carbon material on electrogenic biofilm development was determined by measuring the level of biofilm growth, using sequencing to identify the microbial populations and confocal microscopy to understand the spatial locations of key microbial groups. Geobacter spp. were found to be enriched in closed-circuit operation and these were in close association with the carbon anode, but these were not observed in the open-circuit controls. Electrochemical analysis also demonstrated that the highest mid-point anode potentials were close to values reported for cytochromes from Geobacter sulfurreductans. Biofilm development was greatest in felt anodes (closed-circuit acclimated 1209 ng/μL DNA), and this facilitated the highest pseudo-capacitive values due to the presence of redox-active species, and this was associated with higher levels of power production and also served to mitigate against the effects of low-pH operation. Supporting carbon anode structures are key to electrogenic biofilm development and associated system performance and are also capable of protecting electrochemically active bacteria from the effects of environmental perturbations. [ABSTRACT FROM AUTHOR]

Abstract: Increasing power production and coulombic efficiency (CE) of microbial fuel cells (MFCs) is a common research ambition as the viability of the technology depends to some extent on these measures of performance. As MFCs are typically time varying systems, comparative studies of controlled and un-controlled external load impedance are needed to show if control affects the biocatalyst development and hence MFC performance. The application of logic based control of external load resistance is shown to increase the power generated by the MFC, when compared to an equivalent system which has a static resistive load. The controlled MFC generated 1600±400C, compared to 300±10C with an otherwise replicate fixed load MFC system. The use of a parsimonious gradient based control was able to increase the CE to within the range of 15.1–22.7%, while the CE for a 200Ω statically loaded MFC lay in the range 3.3–3.7%. The controlled MFC improves the electrogenic anodic biofilm selection for power production, indicating that greater power and substrate conversion can be achieved by controlling load impedance. Load control ensured sustainable current demand, applied microbial selection pressures and provided near-optimal impedance for power transference, compared to the un-controlled system. [ABSTRACT FROM AUTHOR]