Search

Excessive amounts of nitrogen (N) and phosphorus (P) can lead to eutrophication in water sources. Woodchip bioreactors have shown success in removing N from agricultural runoff, but less is known regarding P removal. Woodchip bioreactors are subsurface basins filled with woodchips installed downgradient of agricultural land to collect and treat drainage runoff. Microorganisms use the woodchips as a carbon (C) source to transform N in the runoff, with unresolved biological impacts on P. This study aims to explore microbial communities present in the bioreactor and determine whether milling woodchips to probe the microbial communities within them reveals hidden microbial diversities or potential activities. Metagenomic sequencing and bioinformatic analyses were performed on six woodchip samples (i.e., three unmilled and three milled) collected from a 10-year-old woodchip bioreactor treating agricultural tile drainage. All samples had similar DNA purity, yield, quality, and microbial diversity regardless of milling. However, when sequences were aligned against various protein libraries, our results indicated greater relative abundance of denitrification and P transformation proteins on the outside of the woodchips (unmilled), while the interior of woodchips (milled) exhibited more functional gene abundance for carbohydrate breakdown. Thus, it may be important to characterize microbial communities both within woodchips, and on woodchip surfaces, to gain a more holistic understanding of coupled biogeochemical cycles on N, P, and C in woodchip bioreactors. Based on these findings, we advise that future microbial research on woodchips (and potentially other permeable organic materials) examine both the surface biofilm and the interior organic material during initial studies. Once researchers determine where specific proteins or enzymes of interest are most prevalent, subsequent studies may then focus on either one or both aspects, as needed., (© 2024 The Author(s). Journal of Environmental Quality published by Wiley Periodicals LLC on behalf of American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America.)

Exoelectrogenic communities for bioelectrochemical systems such as microbial fuel cells (MFCs) are usually enriched from microbial consortia of municipal wastewater treatment plants and other circumneutral and mesophilic environments. Thus, the study of extreme environments offers an enormous potential to find new exoelectrogens and expand the functionality and applications of MFC technology. In this study, a microbial community previously enriched from acid mine drainage (AMD) sediments was used as inoculum in single-chamber MFCs operated at pH 3.7. The power obtained from the AMD-derived inoculum reached 1 mW m -2 (27.1 ± 7.8 mV with 1 kΩ external resistance), which compares to previous MFC studies operated under low-pH conditions. Additionally, polarization curves showed power-generation levels of 2.4 ± 0.2 mW m -2 and 0.4 ± 0.3 mW m -2 , which were associated with the different inoculum sources: MFCs operated with sulfate concentrations of ~2000 and < 25 mg L -1 , respectively. Microbial characterization performed at the end of the operation showed that both anodic and cathodic biofilm communities were highly dominated by the Proteobacteria phylum (>72% of 16S rRNA gene sequences), followed by Firmicutes (4-11%). Furthermore, the anodic microbial communities of the best-performing reactors were dominated by the Delftia genus (phylum Proteobacteria), which was recently identified as a taxon including exoelectrogenic candidates. These findings expand the literature of low-pH operated MFCs and acid-tolerant exoelectrogens, and also represent a starting point to apply this technology to treat acidic organic loads., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The limited database of acidophilic or acidotolerant electrochemically active microorganisms prevents advancements on microbial fuel cells (MFCs) operated under low pH. In this study, three MFCs were used to enrich cathodic biofilms using acid mine drainage (AMD) sediments as inoculum. Linear sweep voltammetry showed cathodic current plateaus of 5.5 (±0.7) mA at about -170mV vs Ag/AgCl and 8.5 (±0.9) mA between -500mV to -450mV vs Ag/AgCl for biofilms developed on small graphite fiber brushes. After gamma irradiation, biocathodes exhibited a decrease in current density approaching that of abiotic controls. Electrochemical impedance spectroscopy showed six-fold lower charge transfer resistance with viable biofilm. Pyrosequencing data showed that Proteobacteria and Firmicutes dominated the biofilms. Acidithiobacillus representatives were enriched in some biocathodes, supporting the potential importance of these known iron and sulfur oxidizers as cathodic biocatalysts. Other acidophilic chemolithoautotrophs identified included Sulfobacillus and Leptospirillum species. The presence of chemoautotrophs was consistent with functional capabilities predicted by PICRUSt related to carbon fixation pathways in prokaryotic microorganisms. Acidophilic or acidotolerant heterotrophs were also abundant; however, their contribution to cathodic performance is unknown. This study directs subsequent research efforts to particular groups of AMD-associated bacteria that are electrochemically active on cathodes., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Alternative metabolic options of exoelectrogenic biofilms in bioelectrochemical systems (BESs) are important not only to explain the fundamental ecology and performance of these systems but also to develop reliable integrated nutrient removal strategies in BESs, which potentially involve substrates or intermediates that support/induce those alternative metabolisms. This research focused on dissimilatory nitrate reduction as an alternative metabolism to dissimilatory anode reduction. Using the exoelectrogenic nitrate reducer Geobacter metallireducens, the critical conditions controlling those alternative metabolisms were investigated in two-chamber, potentiostatically controlled BESs at various anode potentials and biofilm thicknesses and challenged over a range of nitrate concentrations. Results showed that anode-reducing biofilms facultatively reduced nitrate at all tested anode potentials (-150 to +900 mV vs Standard Hydrogen Electrode) with a rapid metabolic shift. The critical nitrate concentration that triggered a significant decrease in BES performance was a function of anode biofilm thickness but not anode potential. This indicates that these alternative metabolisms were controlled by the availability of nitrate, which is a function of nitrate concentration in bulk solution and its diffusion into an anode-reducing biofilm. Coulombic recovery decreased as a function of nitrate dose due to electron-acceptor substrate competition, and nitrate-induced suspended biomass growth decreased the effluent quality.

Nitrogen removal is needed in microbial fuel cells (MFCs) for the treatment of most waste streams. Current designs couple biological denitrification with side-stream or combined nitrification sustained by upstream or direct aeration, which negates some of the energy-saving benefits of MFC technology. To achieve simultaneous nitrification and denitrification, without extra energy input for aeration, the air cathode of a single-chamber MFC was pre-enriched with a nitrifying biofilm. Diethylamine-functionalized polymer (DEA) was used as the Pt catalyst binder on the cathode to improve the differential nitrifying biofilm establishment. With pre-enriched nitrifying biofilm, MFCs with the DEA binder had an ammonia removal efficiency of up to 96.8% and a maximum power density of 900 ± 25 mW/m(2), compared to 90.7% and 945 ± 42 mW/m(2) with a Nafion binder. A control with Nafion that lacked nitrifier pre-enrichment removed less ammonia and had lower power production (54.5% initially, 750 mW/m(2)). The nitrifying biofilm MFCs had lower Coulombic efficiencies (up to 27%) than the control reactor (up to 36%). The maximum total nitrogen removal efficiency reached 93.9% for MFCs with the DEA binder. The DEA binder accelerated nitrifier biofilm enrichment on the cathode, and enhanced system stability. These results demonstrated that with proper cathode pre-enrichment it is possible to simultaneously remove organics and ammonia in a single-chamber MFC without supplemental aeration., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The relationship between anode microbial characteristics and electrochemical parameters in microbial fuel cells (MFCs) was analyzed by time-course sampling of parallel single-bottle MFCs operated under identical conditions. While voltage stabilized within 4days, anode biofilms continued growing during the six-week operation. Viable cell density increased asymptotically, but membrane-compromised cells accumulated steadily from only 9% of total cells on day 3 to 52% at 6weeks. Electrochemical performance followed the viable cell trend, with a positive correlation for power density and an inverse correlation for anode charge transfer resistance. The biofilm architecture shifted from rod-shaped, dispersed cells to more filamentous structures, with the continuous detection of Geobacter sulfurreducens-like 16S rRNA fragments throughout operation and the emergence of a community member related to a known phenazine-producing Pseudomonas species. A drop in cathode open circuit potential between weeks two and three suggested that uncontrolled biofilm growth on the cathode deleteriously affects system performance., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Microbial fuel cell (MFC) anode communities often reveal just a few genera, but it is not known to what extent less abundant bacteria could be important for improving performance. We examined the microbial community in an MFC fed with formic acid for more than 1 year and determined using 16S rRNA gene cloning and fluorescent in situ hybridization that members of the Paracoccus genus comprised most (approximately 30%) of the anode community. A Paracoccus isolate obtained from this biofilm (Paracoccus denitrificans strain PS-1) produced only 5.6 mW/m(2), whereas the original mixed culture produced up to 10 mW/m(2). Despite the absence of any Shewanella species in the clone library, we isolated a strain of Shewanella putrefaciens (strain PS-2) from the same biofilm capable of producing a higher-power density (17.4 mW/m(2)) than the mixed culture, although voltage generation was variable. Our results suggest that the numerical abundance of microorganisms in biofilms cannot be assumed a priori to correlate to capacities of these predominant species for high-power production. Detailed screening of bacterial biofilms may therefore be needed to identify important strains capable of high-power generation for specific substrates.

Electrochemical impedance spectroscopy (EIS) was used to study the behavior of a microbial fuel cell (MFC) during initial biofilm growth in an acetate-fed, two-chamber MFC system with ferricyanide in the cathode. EIS experiments were performed both on the full cell (between cathode and anode) as well as on individual electrodes. The Nyquist plots of the EIS data were fitted with an equivalent electrical circuit to estimate the contributions of various intrinsic resistances to the overall internal MFC impedance. During initial development of the anode biofilm, the anode polarization resistance was found to decrease by over 70% at open circuit and by over 45% at 27 microA/cm(2), and a simultaneous increase in power density by about 120% was observed. The exchange current density for the bio-electrochemical reaction on the anode was estimated to be in the range of 40-60 nA/cm(2) for an immature biofilm after 5 days of closed circuit operation, which increased to around 182 nA/cm(2) after more than 3 weeks of operation and stable performance in an identical parallel system. The polarization resistance of the anode was 30-40 times higher than that of the ferricyanide cathode for the conditions tested, even with an established biofilm. For a two-chamber MFC system with a Nafion 117 membrane and an inter-electrode spacing of 15 cm, the membrane and electrolyte solution dominate the ohmic resistance and contribute to over 95% of the MFC internal impedance. Detailed EIS analyses provide new insights into the dominant kinetic resistance of the anode bio-electrochemical reaction and its influence on the overall power output of the MFC system, even in the high internal resistance system used in this study. These results suggest that new strategies to address this kinetic constraint of the anode bio-electrochemical reactions are needed to complement the reduction of ohmic resistance in modern designs.

Converting biodegradable materials into electricity, microbial fuel cells (MFCs) present a promising technology for renewable energy production in specific applications. Unlike typical soluble substrates that have been used as electron donors in MFC studies, cellulose is unique because it requires a microbial consortium that can metabolize both an insoluble electron donor (cellulose) and electron acceptor (electrode). In this study, electricity generation and the microbial ecology of cellulose-fed MFCs were analyzed using a defined co-culture of Clostridium cellulolyticum and Geobacter sulfurreducens. Fluorescent in situ hybridization and quantitative PCR showed that when particulate MN301 cellulose was used as sole substrate, most Clostridium cells were found adhered to cellulose particles in suspension, while most Geobacter cells were attached to the electrode. By comparison, both bacteria resided in suspension and biofilm samples when soluble carboxymethyl cellulose was used. This distinct function-related distribution of the bacteria suggests an opportunity to optimize reactor operation by settling cellulose and decanting supernatant to extend cellulose hydrolysis and improve cellulose-electricity conversion., ((c) IWA Publishing 2008.)

Bioremediation of perchlorate-contaminated groundwater can occur via bacterial reduction of perchlorate to chloride. Although perchlorate reduction has been demonstrated in bacterial pure cultures, little is known about the efficacy of using perchlorate-reducing bacteria as inoculants for bioremediation in the field. A pilot-scale, fixed-bed bioreactor containing plastic support medium was used to treat perchlorate-contaminated groundwater at a site in Southern California. The bioreactor was inoculated with a field-grown suspension of the perchlorate-respiring bacterium Dechlorosoma sp. strain KJ and fed groundwater containing indigenous bacteria and a carbon source amendment. Because the reactor was flushed weekly to remove accumulated biomass, only bacteria capable of growing in biofilms in the reactor were expected to survive. After 26 days of operation, perchlorate was not detected in bioreactor effluent. Perchlorate remained undetected by ion chromatography (detection limit 4 mug L(-1)) during 6 months of operation, after which the reactor was drained. Plastic medium was subsampled from top, middle, and bottom locations of the reactor for shipment on blue ice and storage at -80 degrees C prior to analysis. Microbial community DNA was extracted from successive washes of thawed biofilm material for PCR-based community profiling by 16S-23S ribosomal intergenic spacer analysis (RISA). No DNA sequences characteristic of strain KJ were recovered from any RISA bands. The most intense bands yielded DNA sequences with high similarities to Dechloromonas spp., a closely related but different genus of perchlorate-respiring bacteria. Additional sequences from RISA profiles indicated presence of representatives of the low G+C gram-positive bacteria and the Cytophaga-Flavobacterium-Bacteroides group. Confocal scanning laser microscopy and fluorescence in situ hybridization (FISH) were also used to examine biofilms using genus-specific 16S ribosomal RNA probes. FISH was more sensitive than RISA profiling in detecting possible survivors from the initial inoculum. FISH revealed that bacteria hybridizing to Dechlorosoma probes constituted <1% of all cells in the biofilms examined, except in the deepest portions where they represented 3-5%. Numbers of bacteria hybridizing to Dechloromonas probes decreased as biofilm depth increased, and they were most abundant at the biofilm surface (23% of all cells). These spatial distribution differences suggested persistence of low numbers of the inoculated strain Dechlorosoma sp. KJ in parts of the biofilm nearest to the plastic medium, concomitant with active colonization or growth by indigenous Dechloromonas spp. in the biofilm exterior. This study demonstrated the feasibility of post hoc analysis of frozen biofilms following completion of field remediation studies.

A protocol for simultaneously interrogating bacterial viability and identity using in situ, culture-independent methods is described. Viability is assayed using ethidium monoazide (EMA) staining of cells with compromised membranes, and identity is determined using fluorescent in situ hybridization (FISH). Experiments with planktonic cultures were used to demonstrate the compatibility of EMA staining and FISH after covalently bonding EMA to nucleic acids by photoreaction. Applications to biofilm samples showed that diffusion limitations in the biofilm matrix were not problematic and that effective discrimination of viable target cells within a mixed microbial community was possible.