Search

There is a lack of cost-effective, environmentally-friendly tools available to manage marine biofouling accumulation on static artificial structures such as drilling rigs, wind turbines, marine farms, and port and marina infrastructure. For there to be uptake and refinement of tools, emerging technologies need to be tested and proven at an operational scale. This study aimed to see whether biofouling accumulation could be suppressed on marine infrastructure under real-world conditions through the delivery of continuous bubble streams. Submerged surfaces of a floating marina pontoon were cleaned in-situ by divers, and the subsequent colonisation by biofouling organisms was monitored on treated (bubbles applied) and untreated sections. Continuous bubble streams proved highly effective (>95%) in controlling macrofouling accumulation on the underside surface of the marina pontoon for the first 2 months after deployment, but efficacy dropped off rapidly once bubble stream delivery was partially obscured due to biofouling accumulation on the diffuser itself. Although extensive macrofouling cover by mussels, bryozoans and hydroids was observed on treated surfaces by 4 months (27.5%, SE = 4.8%), biofouling % cover and diversity was significantly higher on untreated surfaces (79.6%, SE = 2.9%). While this study demonstrates that continuous bubble streams greatly restrict biofouling accumulation over short-to-medium timescales, improved system design, especially the incorporation of diffusers resistant to fouling, is needed for the approach to be considered a viable long-term option for biofouling management on static artificial structures., Competing Interests: The authors declare that they have no competing interests., (© 2023 Hopkins et al.)

The likelihood that viable non-indigenous biofouling species will survive a voyage on a vessel is influenced by a range of factors, including the speed, duration, and route of the voyage and the amount of time the vessel spends in port. In this study, a land-based dynamic flow device was used to test the effect of recruit age, vessel speed and voyage duration on the survivorship and growth of the bryozoan Bugula neritina. In the experiment, one-week-old recruits had a higher likelihood (100%) of surviving voyages than older (one-month-old, 90%) or younger (one-day-old, 79%) recruits, but survival was not influenced by vessel speed (6 and 18 knots) or voyage duration (two and eight days). The results suggest that the non-indigenous species B. neritina can be effectively transferred at a range of ages but one-week-old recruits are more likely to survive the translocation process and survive in the recipient environment.

In this experimental study the patterns in early marine biofouling communities and possible implications for surveillance and environmental management were explored using metabarcoding, viz. 18S ribosomal RNA gene barcoding in combination with high-throughput sequencing. The community structure of eukaryotic assemblages and the patterns of initial succession were assessed from settlement plates deployed in a busy port for one, five and 15 days. The metabarcoding results were verified with traditional morphological identification of taxa from selected experimental plates. Metabarcoding analysis identified > 400 taxa at a comparatively low taxonomic level and morphological analysis resulted in the detection of 25 taxa at varying levels of resolution. Despite the differences in resolution, data from both methods were consistent at high taxonomic levels and similar patterns in community shifts were observed. A high percentage of sequences belonging to genera known to contain non-indigenous species (NIS) were detected after exposure for only one day.

Encapsulation of fouled structures is an effective tool for countering incursions by non-indigenous biofoulers. However, guidelines for the implementation of encapsulation treatments are yet to be established. This study evaluated the effects of temperature, biomass, community composition, treatment duration and the biocide acetic acid on biofoulers. In laboratory trials using the model organisms Ciona spp. and Mytilus galloprovincialis, increasing the temperature or biomass speeded up the development of a toxic environment. Total mortality for Ciona spp. occurred within 72 and 24 h at 10 and 19°C, respectively. M. galloprovincialis survived up to 18 days, with high biomass increasing mortality at 10°C only. In a field study, three-month-old and four-year-old communities were encapsulated with and without acetic acid. Mortality took up to 10 days for communities encapsulated without acetic acid, compared to 48 h with acetic acid. The insights gained from this study will be useful in developing standardised encapsulation protocols.

The desiccation tolerance of biofouling taxa (adults and early life-stages) was determined under both controlled and 'realistic' field conditions. Adults of the ascidian Ciona spp. died within 24 h. Mortality in the adult blue mussel Mytilus galloprovincialis occurred within 11 d under controlled conditions, compared with 7 d when held outside. The Pacific oyster Crassostrea gigas was the most desiccation-tolerant taxon tested (up to 34 d under controlled conditions). Biofouling orientated to direct sunlight showed faster mortality rates for all the taxa tested. Mortality in Mytilus juveniles took up to 24 h, compared with 8 h for Ciona, with greater survival at the higher temperature (18.5°C) and humidity (~95% RH) treatment combination. This study demonstrated that desiccation can be an effective mitigation method for a broad range of fouling taxa, especially their early life-stages. Further work is necessary to assess risks from other high-risk species such as algae and cyst forming species.

The accumulation of biofouling on coastal structures can lead to operational impacts and may harbour problematic organisms, including non-indigenous species. Benthic predators and grazers that can supress biofouling, and which are able to be artificially enhanced, have potential value as augmentative biocontrol agents. The ability of New Zealand native invertebrates to control biofouling on marina pontoons and wharf piles was tested. Caging experiments evaluated the ability of biocontrol to mitigate established biofouling, and to prevent fouling accumulation on defouled surfaces. On pontoons, the gastropods Haliotis iris and Cookia sulcata reduced established biofouling cover by >55% and largely prevented the accumulation of new biofouling over three months. On wharf piles C. sulcata removed 65% of biofouling biomass and reduced its cover by 73%. C. sulcata also had better retention and survival rates than other agents. Augmentative biocontrol has the potential to be an effective method to mitigate biofouling on marine structures.

Augmentative biocontrol, defined as the use of indigenous natural enemies to control pest populations, has not been explored extensively in marine systems. This study tested the potential of the anemone Anthothoe albocincta as a biocontrol agent for biofouling on submerged artificial structures. Biofouling biomass was negatively related to anemone cover. Treatments with high anemone cover (>35%) led to significant changes in biofouling assemblages compared to controls. Taxa that contributed to these changes differed among sites, but included reductions in cover of problematic fouling organisms, such as solitary ascidians and bryozoans. In laboratory trials, A. albocincta substantially prevented the settlement of larvae of the bryozoan Bugula neritina when exposed to three levels of larval dose, suggesting predation as an important biocontrol mechanism, in addition to space pre-emption. This study demonstrated that augmentative biocontrol using anemones has the potential to reduce biofouling on marine artificial structures, although considerable further work is required to refine this tool before its application.

This study examined the efficacy of heated seawater for the treatment and remediation of fouled vessel sea chest habitats. In laboratory trials, three temperature regimes (37.5°C for 60 min, 40°C for 30min and 42.5°C for 20 min) were tested on a range of temperate taxa commonly found in sea chests. Field validation trials further assessed the efficacy of heat treatment within a replica sea chest environment. During laboratory trials, 100% mortality was achieved across all three treatments for the majority of taxa; the exceptions being the barnacle Elminius modestus and the oyster Crassostrea gigas. Temperature tolerance limits observed in the laboratory were successfully replicated under simulated sea chest conditions; however, a failure to achieve even heat distribution was an obstacle to achieving uniform mortality. This study provides guidance on the temperature/exposure parameters required for vessels plying temperate latitudes, and demonstrates that heated seawater has potential for controlling biofouling in vessel sea chests., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The potential for oil rigs to transport diverse, reef-like communities around the globe makes them high risk vectors for the inadvertent spread of non-indigenous species (NIS). This paper describes two case studies where a suite of pre-border management approaches was applied to semi-submersible drilling rigs. In the first case study, a drilling rig was defouled in-water prior to departure from New Zealand to Australia. Risk mitigation measures were successful in reducing biosecurity risks to the recipient region, but they resulted in the unintentional introduction of the non-indigenous brown mussel (Perna perna) to New Zealand when the rig was defouled in-water by divers. In the second case study, lessons learned from this high-profile incursion resulted in a more structured approach to pre-border management, and this serves as a useful template for future rig transfers., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Vessel traffic is the primary pathway for non-indigenous marine species introductions to New Zealand, with hull fouling recognised as being an important mechanism. This article describes hull fouling on seven slow-moving commercial vessels sampled over a 1 year period. Sampling involved the collection of images and fouling specimens from different hull locations using a standardised protocol developed to assess vessel biofouling in New Zealand. A total of 29 taxa was identified by expert taxonomists, of which 24% were indigenous to New Zealand and 17% non-indigenous. No first records to New Zealand were reported, however 59% of species were classified as 'unknown' due to insufficient taxonomic resolution. The extent of fouling was low compared to that described for other slow-movers. Fouling cover, biomass and richness were on average 17.1% (SE = 1.8%), 5.2 g (SE = 1.1 g) and 0.8 (SE = 0.07) per photoquadrat (200 x 200 mm), respectively. The fouling extent was lowest on the main hull areas where the antifouling paint was in good condition. In contrast, highest levels of fouling were associated with dry-docking support strips and other niche areas of the hull where the paint condition was poor. Future studies should target vessels from a broader range of bioregions, including vessels that remain idle for extended periods (ie months) between voyages, to increase understanding of the biosecurity risks posed by international commercial slow-movers.

The present study tested two diver-operated rotating brush systems, coupled with suction and collection capabilities, to determine their efficacy in the management of vessel biofouling. Both rotating brush systems proved effective (> 80%) in removing low-to-moderate levels of fouling from flat and curved experimental surfaces (Perspex plates). However, performance was generally poorer at removing more advanced levels of fouling. In particular, mature calcareous organisms were relatively resistant to the rotating brushes, with a high proportion (up to 50%) remaining on plates following treatment. On average, > 95% of defouled material was collected and retained by both systems. The amount of lost material generally increased when treating curved plates with increasing biomass, whereas the material lost from flat plates was typically less and remained relatively constant throughout the trials. The majority (> 80%) of fouling not captured by the systems was crushed by the brushes (ie non-viable). However, a diverse range of viable organisms (eg barnacles and hydroids) was lost to the environment during the defouling trials. When defouling a vessel, unintentional detachment of fouling organisms is likely to be high through physical disturbance by divers operating the devices and by associated equipment (eg hoses). Furthermore, residual biosecurity risks are also likely to remain due to diver error, persistent fouling remaining on treated surfaces and the inaccessibility of niche areas to the brush systems. To address these limitations, further research into alternative treatment methods is required.

Pests of bivalve aquaculture are a challenging problem that can reduce productivity, profitability and sustainability. A range of pest management approaches have been developed for bivalve aquaculture, but a general absence of guiding frameworks has limited the scale and permanency of implementation. Applying principles of 'integrated pest management' (IPM) could change this paradigm to improve economic and environmental outcomes. We reviewed existing research and tools for pest management in bivalve aquaculture, with studies grouped under five pillars of IPM: pest ecology (25 studies), bioeconomic cost–benefits (4 studies), continual monitoring (17 studies), proactive prevention (32 studies) and reactive control (65 studies). This body of knowledge, along with insights from terrestrial agriculture, provide a strong foundation for developing and implementing IPM in bivalve aquaculture. For example, IPM principles have been applied by a regional collective of oyster farmers in the US Pacific Northwest to optimize pesticide application and search for other options to control problematic burrowing shrimps. However, IPM has not yet been broadly applied in aquaculture, and data gaps and barriers to implementation need to be addressed. Priorities include establishing meaningful pest–crop bioeconomic relationships for various bivalve farming systems and improving the efficacy and operational scale of treatment approaches. An IPM framework also could guide potential step‐change improvements through directing selective breeding for resistance to pests, development of bespoke chemical control agents, applying emerging technologies for remote surveillance and farm management, and regional alignment of management interventions. © 2022 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Feathers of seabirds and waterfowl (for example the mallard duck (Anas platyrhynchos)) consist of hierarchical fibrillar structures encapsulated with hydrophobic preen oil. These characteristics afford waterproofing through the entrapment of air pockets, enabling swimming and diving for such bird species. This liquid repellency mechanism for bird feathers is mimicked by surface hydrophobisation of fibrous nonwoven polypropylene textiles to create large volumes of trapped air at the solid–liquid interface (plastron). Higher static water contact angle values correlate to a greater resistance towards water ingress (akin to the behaviour of mallard feathers). In order to extend the trapped gas layer lifetimes, the transportation of air from the water surface to a submerged air bubble by the diving bell spider (Argyroneta aquatica) for respiration is mimicked via short duration (< 1 s) solar-powered air bubble bursts once every 2 h. This combination of ornithological and arachnological inspired approaches yields stable trapped gas layers at the solid–liquid interface which are shown to inhibit biofouling in real-world outdoor wet environments. [Display omitted] • Bioinspiration from mallard duck feathers and the diving bell spider. • Fabrication of trapped surface air layers. • Long lasting and environmentally sustainable antibiofouling. [ABSTRACT FROM AUTHOR]

Unwanted biofouling and predatory pests are a universal problem threatening aquaculture productivity and profitability. Various control approaches have been trialled, but industry uptake has been elusive due to the typically fine balance between pest and bivalve physiological tolerances (i.e., 'therapeutic window') and operational challenges related to infrastructure, scalability, and quality control. This study aimed to address these factors for acetic acid (AcOH), arguably the best-studied and most broadly applicable reactive treatment for bivalve aquaculture. Using case studies of farmed New Zealand green-lipped mussels (Perna canaliculus Gmelin 1791) and Pacific oysters (Crassostrea gigas Thunberg 1793), AcOH tolerances of various size classes of these bivalves were determined in a series of laboratory experiments, and cross-referenced to corresponding data for biofouling and predatory pests. Resulting 'therapeutic windows' formed the basis of provisional treatment parameters, being 2% AcOH for 60 s or 4% AcOH for 30 s for P. canaliculus and C. gigas , respectively. Three independent field experiments on operational P. canaliculus and C. gigas farms subsequently served to refine and validate the treatment parameters and associated operational procedures. For P. canaliculus , AcOH treatment had overall positive impacts on commercially relevant measures of aquaculture production, with the best performing treatment regimens of 1% or 2% AcOH for 60 s resulting in almost three times as many individual P. canaliculus per section of growing rope. Incorporating a subsequent air-drying step was also shown to reduce required AcOH immersion times, providing opportunities to enhance operational efficiencies via more rapid treatments. The provisional treatment parameters for C. gigas of 4% AcOH for 30 s were also highly effective against biofouling pests in the field and resulted in no detectable mortality of the culture species. Overall, this study demonstrates the utility of carefully refined and validated AcOH treatments to control problematic pests in bivalve aquaculture. It is essential to accurately determine 'therapeutic windows' for any given bivalve culture species and developing understanding of crop-pest interactions would better inform treatment timing and frequency. Such approaches could feed into wider frameworks to optimally manage pests below economically damaging thresholds, with AcOH ideally being one option in an arsenal of management interventions. • Determined and validated 'therapeutic windows' for acetic acid pest treatment of farmed bivalves. • Provisional treatment parameters defined in laboratory: 2% for 60 s or 4% for 30 s. • Field validation confirmed treatment parameters and evaluated operational feasibility. • When appropriately applied, acetic acid treatment improved productivity of farmed bivalves. [ABSTRACT FROM AUTHOR]