Search

Biomass materials play a key role in the renewable energy market as they can serve as a suitable alternative to fossil fuels. However, the quality of the material entering bioenergy plants is often a cause of technical concern. Biomass quality assessment is crucial not only for energy characterization but also for environmental and operational aspects. The goal of this study is to characterize and classify the biomasses used by Italian power plants with reference to the quality classes stated by the ISO standard 17225:2021. A further objective is to verify the ability of the standard to classify heterogeneous and specific biomasses. In this study, more than 900 biomass samples were analyzed. The samples were collected from several Italian power plants with >5 MWe between 2010 and 2020, and the most important physical and chemical parameters were analyzed according to the international standards of reference. The results of the analyses were collected in a large dataset used for subsequent statistical analyses. Statistical analyses applied are Principal Component Analysis and Pearson correlation maps, which showed that the ash content is a fundamental and ideal parameter to assess the biomass quality. Results obtained demonstrate that herbaceous biomasses are of low quality mainly due to the high ash content; a relatively low ash content was found for woody biomasses. [ABSTRACT FROM AUTHOR]

The chemical composition of woody biomass directly influences its thermal degradation and, subsequently, the selection of processes and technologies used for its conversion into energy or value-added products. Thus, the present study aimed to evaluate the thermal behavior and chemical-physical characteristics of three different woody biomass species (hardwood, softwood and chemically-treated wood) using thermogravimetric and characterization analysis based on ISO 16948, ISO 18125 and ISO 18122 methods. The main findings show that the most significant trend of mass loss, around 70%, in the thermal degradation of the different species of woody biomass occurred between 150 °C and 500 °C and that the residual mass at 650 °C was between 13% and 24%. Although the three species of woody biomass showed a high average energy content (19.60 MJ/kg), softwood samples had a more stable thermal degradation than hardwoods and chemically-treated woods. [ABSTRACT FROM AUTHOR]

Quality is a crucial issue for the energy use of residual biomass, especially for agricultural biomass [[20]]. The authors highlighted that local sourcing of biomass materials with an efficient logistics system presents environmental benefits and significant economic advantages regarding various logistical aspects of biomass transport and energy distribution. All the published papers deal with aspects connected with the SI's theme, such as residual biomass quality, sustainability assessment of solid biofuel production, and bioenergy sustainability assessment. Ilari et al. [[45]] analytically defined the quality of residual woody biomass produced in marginal areas and the solid biofuels obtained from that biomass material. [Extracted from the article]

The high heterogeneity of some residual biomasses makes rather difficult their energy use. Their standardisation is going to be a key aspect to get good quality biofuels from those residues. Torrefaction is an interesting process to improve the physical and chemical properties of lignocellulosic biomasses and to achieve standardisation. In the present study torrefaction has been employed on residues and by-products deriving from sunflower production chain, in particular sunflower stalks, husks and oil press cake. The thermal behaviour of these materials has been studied at first by thermogravimetric analysis in order to identify torrefaction temperatures range. Afterwards, different residence time and torrefaction temperatures have been tested in a bench top torrefaction reactor. Analyses of raw and torrefied materials have been carried out to assess the influence of the treatment. As a consequence of torrefaction, the carbon and ash contents increase while the volatilisation range reduces making the material more stable and standardised. Mass yield, energy yield and energy densification reach values of about 60%, 80% and 1.33 for sunflower stalks and 64%, 85% and 1.33 for sunflower oil press cake respectively. As highlighted by the results, torrefaction is more interesting for sunflower stalks than oil cake and husks due to their different original characteristics. Untreated oil press cake and husks, in fact, already show a good high heating value and, for this reason, their torrefaction should be mild to avoid an excessive ash concentration. On the contrary, for sunflower stalks the treatment is more useful and could be more severe. [ABSTRACT FROM AUTHOR]

The use of renewable energies as alternative to fossil fuels has value from different points of view and has effects at environmental, social and economic level. These aspects are often connected to each other and together define the overall sustainability of bioenergy. At European level, the Directive 2009/28/EC gives the basic criteria for the estimation of sustainability of biofuels and indicates a minimum threshold of 35% of greenhouse gas saving for a biofuel in order to be considered sustainable. The Directive gives the possibility to identify standard regional values for the cultivation steps that could be utilized for the certification. This paper aims to give a contribution to the definition of these values considering the RED methodology applied to the sunflower cropped in central Italy which is characterized by a hilly landscape and not-irrigated crops. To determine input and output of sunflower cultivation in the central Italy, the results of PROBIO project, carried out by the Authors, were used. The sustainability of biodiesel produced from sunflower grown in central Italy is variable and depends on the nitrogen input and seasonal climatic conditions that affect the yields. The greenhouse gases savings of the Italian chain is 40% in average, greater than the required 35% and would be possible to assign this value as standard to the biofuel chain biodiesel from sunflower cultivated in central Italy. Using an averaged regional standard value guards against the possibility of considering unsustainable harvesting in unfavourable years and seeing it overestimated in the favourable ones. [ABSTRACT FROM AUTHOR]

The agricultural sector and its related production chains are good sources of residual biomass. Olive and vineyard pruning residues are present in high quantities in Italy. The limited bulk and energy densities of these biomass materials affect the harvesting and logistic costs, limiting energy and environmental sustainability. Pelletisation is the most efficient process for increasing bulk and energy densities. This study evaluates the pelletisation process of olive and vineyard prunings, pure, or blended with variable quantities of spruce sawdust. A 15 kW pelletisation system was chosen, in line with production at the farm level. The most important quality parameters of the produced agripellets were analyzed. The results of this investigation suggest that blending could valorize other biomass materials less suitable for pelletisation and reach the pellet quality required by Italian technical standards. The addition of pruning residues to spruce sawdust leads to an improvement in durability. Spruce sawdust pellets have a durability value of 78.4%. Adding 20% of olive prunings (S80O20) increases this value to 92.2, while adding 20% vineyard prunings (S80V20) increases this value up to 90.3. The addition of 20% of pruning residues significantly increased the length and decreased fines. [ABSTRACT FROM AUTHOR]

At present, the majority of available road and jet biofuels are produced from oleochemical feedstocks that include vegetable oils and biowastes such as waste cooking oils and animal fats. Additionally, one of the most promising ways to achieve long-term environmental goals is to sustainably use lignocellulosic residues. These resources must be treated through a deoxygenation process and subsequent upgrading processes to obtain high-quality road and jet biofuels. Accordingly, in this review, we explore recent advancements in the deoxygenation of oleochemical and lignocellulosic feedstocks in the absence of hydrogen to produce high-quality road and jet biofuels, mainly focusing on the use of nanomaterials as catalysts and the valorization of lipid-rich biowastes and lignocellulosic residues. As a result, we found that regardless of the catalyst particle size, the coexistence of basic sites and weak/medium acid sites is highly important in catalytic systems. Basic sites can enhance the removal of oxygenates via decarboxylation and decarbonylation reactions and inhibit coke formation, while weak/medium acid sites can enhance the cracking reaction. Additionally, the extraction of value-added derivatives from lignocellulosic residues and their subsequent upgrade require the use of advanced methods such as the lignin-first approach and condensation reactions. [ABSTRACT FROM AUTHOR]

Phasing out fossil fuels to renewables is currently a global priority due to the climate change threat. Advocacy for biomass use as an energy source requires assessing the quality biomass and ecological impacts of bioenergy supply chains. This study evaluated the quality of biomass residues from orchards and silviculture transported from different Northern and Central Italy locations and the carbon footprint of a biomass power plant. The total greenhouse emissions were calculated based on primary data for 2017 according to the ISO/TS 14067. All the residue samples showed their suitability for biofuel use. Ash content was relatively low on average (3–5% d.m.), except for grapevine residues (18% d.m.). The lower heating value was within the expected range of 15–21 MJ kg−1 for plant species. The average GHG emission from the power plant was 17.4 g CO2 eq./MJ of electrical energy, with the energy conversion (38%) and transportation of biomass (34%) phases being the main impact contributors. For this study, impacts of residual agricultural residue were about half that of residues from forest management, mainly due to chipping and greater transport distance. Results show that sourcing residual biomass materials for electricity generation close to power plants significantly reduce GHG emissions compared to conventional fossil fuels. [ABSTRACT FROM AUTHOR]

In the latex production chain, rubber tree seeds (Hevea brasiliensis) represent an underutilized fraction with high potentialities, which can increase the sustainability of the whole process if rightly valorized. In the present study, the quality of all the fractions obtained from the rubber fruit were evaluated, with the aim to identify possible applications for their valorization with a circular economy perspective. Seeds from five different varieties of rubber tree were analyzed. Furthermore, a whole mass and energy balance was defined, which has allowed us to define hypothetical production scenarios. The obtained results show negligible differences among varieties. Shells and capsules have shown a composition similar to woody biomass, with high heating values (more than 16.5 MJ kg−1), low nitrogen content (below 0.5% on weight basis (w/w)) and reduced ash content (0.51% w/w and 1.90% w/w, respectively). Kernels were chemically extracted comparing two different solvents: n-hexane and ethanol. Both solvents showed similar extraction yields, i.e., 49% w/w and 46% w/w for n-hexane and ethanol, respectively. The resulting extraction flour was characterized by a high protein content (around 40% w/w) making it suitable for animal feeding. The rubber seed oil could be used in blends of different vegetable oils for biodiesel production. All this information is useful for improving the sustainability of the latex production chain and to assess the sustainability of possible bioenergy value chains. [ABSTRACT FROM AUTHOR]

Abstract: Tomato manufacturing industry originates substantial amounts of residues. If left without control these residues can constitute an environmental problem. Their energetic use can solve this problem and give added value to the process. In this research physical-chemical characteristics of this biomass and its components are studied to evaluate the possibility of an energy recovery. In general, the dry residues of tomato processing industry are suitable as solid biofuel for energy purposes in large size power plants. The separation of components that constitute tomato residues (peels and seeds) makes sense in case of production and exploitation of oil from tomato seeds. The results can be useful for developing standards on these materials. [Copyright &y& Elsevier]

This study focuses on verifying the influence of some additives in the ash melting process of herbaceous biomass, developing a pelletized biofuel from the mixture of herbaceous biomass and various inorganic substances through a series of experimental tests. Therefore, different materials were sampled, chemically characterized and combined in mixtures of low-melting biomass materials. Tests were performed with various inorganics products added directly on the relative ashes to verify the interaction between the two systems. Subsequently, herbaceous biomass pellets containing growing amounts of additive were produced, verifying their effectiveness by analyzing the ash melting temperatures and adopting the PASSA test, that investigates the size of the ashes after incinerating the biomass in a muffle. The same method was then used to evaluate the ashes of an industrial boiler. Results show that the addition of inorganic additives in the extent of 3–5% by weight determines an increase in deformation temperatures over 547 °C for several biomass materials and additives. Tests carried out on forage pellets made with alfalfa and CaO as additive brought instead to an increase in deformation temperature between 43 and 107 °C. This work could be of interest in the evaluation of the energy reuse of herbaceous materials that would otherwise be considered as waste, and also it suggests the possibility of using egg shells as inorganic additives in accordance to the circular economy approach. Furthermore, the additivation level of these pelletized biofuel is perfectly in line with the provisions of ISO 17225-6 for non-woody pellets (≤5% weight). [ABSTRACT FROM AUTHOR]