Search

The main purpose of tissue engineering is to fabricate and exploit engineered constructs suitable for the effective replacement of damaged tissues and organs, and able to perfectly integrate with the host’s organism without eliciting any adverse reaction. Ideally, autologous materials represent the best option, but they are often limited due to the low availability of compatible healthy tissues. So far, one therapeutic approach relies on the exploitation of synthetic materials: they exhibit good features in terms of impermeability, deformability and flexibility, but present chronic risks of infections and inflammations. Alternatively, biological materials, including naturally derived ones and acellular tissue matrices of human or animal origin, can be used to induce cells growth and differentiation, which are needed for tissue regeneration: however, this kind of materials lacks satisfactory mechanical resistance and reproducibility, affecting their clinical application. In order to overcome the above-mentioned limitations, hybrid materials, which can be obtained by coupling synthetic polymers and biological materials, have been investigated with the aim to improve biological compatibility and mechanical features. Currently, the interest in these mate-rials is growing, but the ideal ones have not been found yet. The present review aims at exploring some applications of hybrid materials, with particular mention to urological and cardiovascular fields: in the first case, the efforts to find a construct that can guarantee impermeability, mechanical resistance and patency will be herein illustrated; in the second case, the search for impermeability, hemocompatibility and adequate compliance will be been disclosed.

Background Due to the shortage of organs’ donors that limits biological heart transplantations, mechanical circulatory supports can be implanted in case of refractory end-stage heart failure to replace partially (Ventricular Assist Device, VAD) or completely (Total Artificial Heart, TAH) the cardiac function. The hemocompatibility of mechanical circulatory supports is a fundamental issue that has not yet been fully matched; it mostly depends on the nature of blood-contacting surfaces. Methods In order to obtain hemocompatible materials, a pool of hybrid membranes was fabricated by coupling a synthetic polymer (polycarbonate urethane, commercially available in two formulations) with a decellularized biological tissue (porcine pericardium). To test their potential suitability as candidate materials for realizing the blood-contacting surfaces of a novel artificial heart, hybrid membranes have been preliminarily characterized in terms of physicochemical, structural and mechanical properties. Results Our results ascertained that the hybrid membranes are properly stratified, thus allowing to expose their biological side to blood and their polymeric surface to the actuation system of the intended device. From the biomechanical point of view, the hybrid membranes can withstand deformations up to more than 70 % and stresses up to around 8 MPa. Conclusions The hybrid membranes are suitable for the construction of the ventricular chambers of innovative mechanical circulatory support devices.

Over the years, several devices have been created (and the development of many others is currently in progress) to be in permanent contact with blood: mechanical circulatory supports represent an example thereof. The hemocompatibility of these devices largely depends on the chemical composition of blood-contacting components. In the present work, an innovative material (hybrid membrane) is proposed to fabricate the inner surfaces of a pulsatile ventricular chamber: it has been obtained by coupling a synthetic polymer (e.g., commercial polycarbonate urethane) with decellularized porcine pericardium. The hemocompatibility of the innovative material has been preliminarily assessed by measuring its capacity to promote thrombin generation and induce platelet activation. Our results demonstrated the blood compatibility of the proposed hybrid membrane.

Among the urinary tract’s malignancies, bladder cancer is the most frequent one: it is at the tenth position of most common cancers worldwide. Currently, the gold standard therapy consists of radical cystectomy, which results in the need to create a urinary diversion using a bowel segment from the patient. Nevertheless, due to several complications associated with bowel resection and anastomosis, which significantly affect patient quality of life, it is becoming extremely important to find an alternative solution. In our recent work, we proposed the decellularized porcine small intestinal submucosa (SIS) as a candidate material for urinary conduit substitution. In the present study, we create SIS-based hybrid membranes that are obtained by coupling decellularized SIS with two commercially available polycarbonate urethanes (Chronoflex AR and Chronoflex AR-LT) to improve SIS mechanical resistance and impermeability. We evaluated the hybrid membranes by means of immunofluorescence, two-photon microscopy, FTIR analysis, and mechanical and cytocompatibility tests. The realization of hybrid membranes did not deteriorate SIS composition, but the presence of polymers ameliorates the mechanical behavior of the hybrid constructs. Moreover, the cytocompatibility tests demonstrated a significant increase in cell growth compared to decellularized SIS alone. In light of the present results, the hybrid membrane-based urinary conduit can be a suitable candidate to realize a urinary diversion in place of an autologous intestinal segment. Further efforts will be performed in order to create a cylindrical-shaped hybrid membrane and to study its hydraulic behavior.

The history of biomaterials dates back to the mists of time: human beings had always used exogenous materials to facilitate wound healing and try to restore damaged tissues and organs. Nowadays, a wide variety of materials are commercially available and many others are under investigation to both maintain and restore bodily functions. Emerging clinical needs forced the development of new biomaterials, and lately discovered biomaterials allowed for the performing of new clinical applications. The definition of biomaterials as materials specifically conceived for biomedical uses was raised when it was acknowledged that they have to possess a fundamental feature: biocompatibility. At first, biocompatibility was mainly associated with biologically inert substances; around the 1970s, bioactivity was first discovered and the definition of biomaterials was consequently extended. At present, it also includes biologically derived materials and biological tissues. The present work aims at walking across the history of biomaterials, looking towards the scientific literature published on this matter. Finally, some current applications of biomaterials are briefly depicted and their future exploitation is hypothesized.

Decellularized xenogeneic scaffolds have shown promise to be employed as compatible and functional cardiovascular biomaterials. However, one of the main barriers to their clinical exploitation is the lack of appropriate sterilization procedures. This study investigated the efficiency of a two-step sterilization method, antibiotics/antimycotic (AA) cocktail and peracetic acid (PAA), on porcine and bovine decellularized pericardium. In order to assess the efficiency of the method, a sterilization assessment protocol was specifically designed, comprising: i) controlled contamination with a known amount of bacteria; ii) sterility test; iii) identification of contaminants through MALDI-TOF (Matrix-Assisted Laser Desorption/Ionization Time-of-Flight) mass spectrometry and iv) quantification by the Most Probable Number (MPN) method. This sterilization assessment protocol proved to be a successful tool to monitor and optimize the proposed sterilization method. The treatment with AA + PAA method provided sterile scaffolds while preserving the structural integrity and biocompatibility of the decellularized porcine and bovine tissues. However, surface properties and cellular adhesion resulted slightly impaired on porcine pericardium. This work developed a sterilization method suitable for decellularized pericardial scaffolds that could be adopted for in vivo tissue engineering. Together with the proposed sterilization assessment protocol, this decontamination method will foster the clinical translation of decellularized xenogeneic substitutes. Statement of Significance Clinical application of functional and compatible xenogeneic decellularized scaffolds has been delayed due to the lack of appropriate sterilization methodologies. In this study, it was investigated an effective sterilization method optimized for porcine and bovine decellularized pericardia, based on the use of antibiotics/antimycotics followed by peracetic acid treatment. This treatment effectively sterilizes both species scaffolds, proves to maintain tissue overall structure and components, preserves biocompatibility and biomechanical properties. Furthermore, it was also developed a sterilization assessment protocol used to monitor and validate the previous method, consisting in three main parts: i) controlled contamination; ii) sterility test, and iii) identification and quantification of contaminants. Both methodologies were optimized for the tissues in study but can be applied to other scaffolds and accelerate their clinical translation.

Bovine and porcine pericardia are currently used for manufacturing prosthetic heart valves: their design has become an increasingly important area of investigation in parallel with progressively expanding indications for the transcutaneous approach to heart valves replacement. Before being cut and shaped, pericardial tissues are expected to be properly characterized. Actually, the mechanical assessment of these biomaterials lacks standardized protocols. In particular, the role of preconditioning for achieving a constant mechanical response of tissue samples is still controversial. In the present work, the mechanical response to uniaxial load of native bovine and porcine pericardia, with and without preconditioning was assessed; moreover, the mechanical behavior of pericardia was investigated and explained. It was demonstrated that: (i) pericardial tissue samples hold memory of the loading history but just within the extent of the deformation applied; (ii) the behavior of native bovine and porcine pericardia in response to load is explained by a mechanism based on the additive recruitment of collagen fibers; (iii) the current concept that plasticity is absent in pericardium has to be at least in part reconsidered.

The formation of thrombotic deposits affects the functionality of mechanical prosthetic heart valves; as a consequence, mechanical valves thrombosis needs early diagnosis to prevent thromboembolic events. This paper compares the acoustic signals produced by two commercial bileaflet mechanical heart valves in the closing phase to detect the presence of thrombi. The closing sounds were recorded in vitro by means of a phonocardiographic device under different hydrodynamic conditions. Thrombotic deposits of different weight and shape were applied onto the valve leaflet and the annular housing, until the movement of one leaflet was completely blocked. From the acoustic signals, the corresponding spectra were calculated and four diagnostic frequency bands were identified: their comparison allowed detecting malfunctioning valves because of the presence of thrombotic formations.

Autologous platelet-rich hemocomponents have emerged as potential biologic tools for regenerative purpose, but their therapeutic efficacy still remains controversial. This work represents the characterization study of an innovative autologous leukocyte-fibrin-platelet membrane (LFPm), which we prepared according to a novel protocol involving multiple cycles of apheresis. The high content in fibrinogen gave to our hemocomponent the appearance of a manipulable and suturable membrane with high elasticity and deformation capacity. Moreover, being highly enriched with platelets, leukocytes, and monocytes/macrophages, the LFPm sustained the local release of bioactive molecules (platelet derived growth factor, vascular endothelial growth factor, interleukin-10, and tumour necrosis factor alpha). In parallel, the evaluation of stemness potential highlighted also that the LFPm contained cells expressing pluripotency and multipotency markers both at the messenger ribonucleic acid (NANOG, SOX2, THY1, NT5E, and ENG) and surface-protein level (CD44high /CD73+ /CD34+ /CD117+ /CD31+ ). Finally, biodegradation analysis interestingly showed a good stability of the membrane for at least 3 weeks in vitro and 1 week in vivo. In both cases, biodegradation was associated with progressive exposure of fibrin scaffold, loss/migration of cellular elements, and release of growth factors. Overall, collected evidence could shed some light on the regenerative effect that LFPms may exert after the autologous implant on a defect site.

Heart valve disorders, caused by congenital defects, rheumatic fever, calcification, myocardial infarction and other cardiovascular diseases, often require native valves to be replaced by bio-prosthetic devices or mechanical heart valves (MHVs). Among MHVs, bileaflet valves are usually preferred for their hemodynamic features, similar to physiological ones, and their durability, but they are prone to complications due to thromboembolic events. Due to the asynchronous closure of the leaflets, bileaflet MHVs are also known to produce closing sounds typically characterized by the presence of two peaks in the time domain. The detection of this “double click” in the signal may be useful for the early diagnosis of bileaflet MHV malfunction. The closing sound is actually a non-stationary signal that can be properly explored by means of time-frequency analysis. This paper describes a preliminary approach to the investigation of bileaflet MHV closing sounds performed by Continuous Wavelet Transform (CWT) analysis. Signals were collected from 3 patients immediately after surgery by means of the Myotis 3C, which is a traditional phonocardiographic apparatus. Signals were analyzed by two algorithms: one embedded in the Myotis 3C, based on the Fast Fourier Transform (FFT); and one specifically created for the purposes of the present study, based on CWT. The performance of these algorithms was compared and the results showed that the proposed CWT technique correctly classifies as “double” a large number of clicks that are recognized as “single” by the Myotis 3C.

A fundamental goal in the field of implantology is the design of specific devices able to induce a controlled and rapid “osseointegration”. This result has been achieved by means of surface modifications aimed at optimizing implant-to-bone contact; furthermore, bone cell adhesion on implant surface has been directly improved by the application of biomolecules that stimulate new tissue formation, thus controlling interactions between biological environment and implanted materials. Actually, methods for biochemical factor delivery at the interface between implant surface and biological tissues are under investigation; a reliable technique is represented by the inclusion of biologically active molecules into biocompatible and biodegradable materials used for coating implant surface. This paper focuses the application of three polymeric materials already acknowledged in the clinical practice, i.e. poly- l -lactic acid (PLLA), poly- dl -lactic acid (PDLA), and sodium alginate hydrogel. They have been used to coat Ti (Ti2) and Ti6Al4V (Ti5) disks; their characteristics have been determined and their performances compared, with specific regard to the ability in allowing osteoblast adhesion in vitro. Moreover, profilometry data analysis permitted to identify a specific roughness parameter (peak density) which mainly controls the amount of osteoblast adhesion.

Notwithstanding their wide exploitation, biological prosthetic heart valves are characterized by limited durability (10–15 years). The treatment of biological tissues with chemical crosslinking agents such as glutaraldehyde accounts for the enhanced risk of structural deterioration associated with the early failure of bioprosthetic valves. To overcome the shortcomings of the currently available solutions, adoption of decellularized biological tissues of animal origin has emerged as a promising approach. The present study aims to assess in vitro cardiovascular scaffolds composed of bovine pericardium decellularized with the novel TRITDOC (TRIton-X100 and TauroDeOxyCholic acid) procedure. The effects of the treatment have been assessed by means of histological, biomolecular, cellular, biochemical and biomechanical analyses. The TRITDOC procedure grants the complete decellularization of bovine pericardial scaffolds while preserving the extracellular matrix architecture and the biomechanical properties. With a dedicated ELISA test, the TRITDOC procedure has been proven to ensure the complete removal of the alphaGal antigen, responsible for hyperacute rejection and for long-term deterioration of xenogenic biomaterials. Static seeding of the acellular pericardial patches with human adipose-derived stem cells resulted in an evenly repopulated scaffold without signs of calcification. The in vitro cyto-/immuno-compatibility response of the TRITDOC-bovine pericardium was compared with glutaraldehyde-treated xenogenic pericardium collected from two bioprosthetic devices currently used in clinical practice: PERIMOUNT MAGNA and TRIFECTATM. TRITDOC-bovine pericardium exhibited lower complement activation, lower cytotoxicity and a lower tendency to secrete pro-inflammatory cytokines compared to the tested commercial bioprostheses. Therefore, TRITDOC-decellularized pericardium could be considered as possible candidate material for the production of prosthetic heart valves.

The features of implant devices and the reactions of bone-derived cells to foreign surfaces determine implant success during osseointegration. In an attempt to better understand the mechanisms underlying osteoblasts attachment and spreading, in this study adhesive peptides containing the fibronectin sequence motif for integrin binding (Arg-Gly-Asp, RGD) or mapping the human vitronectin protein (HVP) were grafted on glass and titanium surfaces with or without chemically induced controlled immobilization. As shown by total internal reflection fluorescence microscopy, human osteoblasts develop adhesion patches only on specifically immobilized peptides. Indeed, cells quickly develop focal adhesions on RGD-grafted surfaces, while HVP peptide promotes filopodia, structures involved in cellular spreading. As indicated by immunocytochemistry and quantitative polymerase chain reaction, focal adhesions kinase activation is delayed on HVP peptides with respect to RGD while an osteogenic phenotypic response appears within 24 h on osteoblasts cultured on both peptides. Cellular pathways underlying osteoblasts attachment are, however, different. As demonstrated by adhesion blocking assays, integrins are mainly involved in osteoblast adhesion to RGD peptide, while HVP selects osteoblasts for attachment through proteoglycan-mediated interactions. Thus an interfacial layer of an endosseous device grafted with specifically immobilized HVP peptide not only selects the attachment and supports differentiation of osteoblasts but also promotes cellular migration.

Objectives: As is true for all mechanical prostheses, bileaflet heart valves are prone to thrombus formation; reduced hemodynamic performance and embolic events can occur as a result. Prosthetic valve thrombosis affects the power spectra calculated from the phonocardiographic signals corresponding to prosthetic closing events. Artificial neural network–based classifiers are proposed for automatically and noninvasively assessing valve functionality and detecting thrombotic formations. Further studies will be directed toward an enlarging data set, extending the investigated frequency range, and applying the presented approach to other bileaflet mechanical valves. Methods: Data were acquired for the normofunctioning St. Jude Regent valve mounted in the aortic position of a Sheffield Pulse Duplicator. Different pulsatile flow conditions were reproduced, changing heart rate and stroke volume. The case of a thrombus completely blocking 1 leaflet was also investigated. Power spectra were calculated from the phonocardiographic signals and used to train artificial neural networks of different topologies; neural networks were then tested with the spectra acquired in vivo from 33 patients, all recipients of the St. Jude Regent valve in the aortic position. Results: The proposed classifier showed 100% correct classification in vitro and 97% when applied to in vivo data: 31 spectra were assigned to the right class, 1 received a false positive classification, and 1 was “not classifiable.” Conclusion: Early malfunction detection is necessary to prevent thrombotic events in bileaflet mechanical heart valves. Following further clinical validation with an extended patient database, artificial neural network–based classifiers could be embedded in a portable device able to detect valvular thrombosis at early stages of formation: this would help clinicians make valvular dysfunction diagnoses before the appearance of critical symptoms.

Structural, mechanical and biochemical properties have to be considered when searching for suitable extracellular matrix substitutes. Fibrous structures of synthetic or natural polymers have received increasing interest as three-dimensional scaffolds for tissue engineering applications as they can be easily produced by electrospinning with different topographical features by changing the process parameters. On the other hand, the nanobiotechnology approach suggests mimicking molecular architectures in nature through self-assembly. In particular, self-assembling peptide-based biomaterials have been successfully used as scaffolds for cell growth. In order to amalgamate these two strategies nanofibrous electrospun scaffolds of hybrid polymer were designed and obtained by mixing poly(ethylene oxide) and self-assembling peptides in aqueous solution. The results of in vitro osteoblast adhesion and proliferation assays on the electrospun scaffolds obtained using different self-assembling peptide sequences are discussed.

Haemodynamic performance of bileaflet mechanical heart valves can be severely affected by the formation of thrombotic deposits. Hence, early detection of thrombi is fundamental for a prompt diagnosis and adequate therapy. This article aims at designing a novel diagnostic and prognostic tool able to detect valvular thrombosis at early stages of formation, i.e., before the appearance of critical symptoms in patients who can be effectively treated by pharmacological therapy, preventing re-operation. This approach relies on the acquisition of the acoustic signals produced by mechanical heart valves in the closing phase; the corresponding power spectra are then analysed by means of artificial neural networks trained to identify the presence of thrombi and classify their occurrence. Five commercial bileaflet mechanical heart valves were investigated in vitro in a Sheffield Pulse Duplicator; for each valve six functional conditions were considered, each corresponding to a risk class for patients (one normofunctioning and five thrombosed): they have been simulated by placing artificial deposits of increasing weight and different shape on the valve leaflet and on the annular housing; the case of one completely blocked leaflet was also investigated. These six functional conditions represent risk classes: they were examined under various hydrodynamic regimes. The acoustic signals produced by the valves were acquired by means of a phonocardiographic apparatus, then analysed and classified. The ability to detect and classify thrombotic formations on mechanical valve leaflet would allow ranking patients by assigning them to one of the six risk classes, helping clinicians in establish adequate therapeutic approaches.

A fundamental goal in the field of implantology is the design of innovative devices suitable foil promoting, implant-to-tissue integration. This result can be achieved by means of surface modifications aimed at optimizing tissue regeneration. In the framework of oral and orthopedic implantology, surface modifications concern both the optimization of titanium/titanium alloy surface roughness and the attachment of biochemical factors able to guide cellular adhesion and/or growth. This article focuses on the covalent attachment of two different adhesive peptides to rough titanium disks. The capability of biomimetic surfaces to increase osteoblast adhesion and the specificity of their biological activity due to the presence of cell adhesion signal-motif have also been investigated. In addition, surface analyses by profilometry, X-ray photoelectron spectroscopy, and time of flight-secondary ion mass spectrometry have been carried out to investigate the effects and modifications induced by grafting procedures.

Bileaflet mechanical heart valves, which exhibit hemodynamic performance fairly similar to that of native valves, can be investigated by the analysis of their closing sounds. Signal spectra calculated from the closing sounds are characterized by specific features that are suitable for the functional evaluation of the valves. Five commercial bileaflet mechanical heart valves were studied under different conditions that were simulated in vitro using a Sheffield pulse duplicator for the aortic position. The closing sounds were acquired by means of a phonocardiographic apparatus, analyzed by a specifically implemented algorithm, and were statistically compared. This article was aimed at classifying the investigated valves on the basis of their signal spectra: different profiles were identified, depending on the working conditions; moreover, closing sound reproducibility and intensity allowed the ranking of valve performances with respect to the "noise" produced by valve closure. In particular, results demonstrated which valves were characterized by the lowest noise (i.e., the Medtronic Advantage and St. Jude Regent valves) and which were characterized by the highest reproducibility (OnX, Medtronic Advantage, and St. Jude Regent valves) under the examined experimental conditions.

Bioactive molecules have been proposed to promote beneficial interactions at bone-implant interfaces for enhancing integration. The main objective of this study was to develop novel methods to functionalize oxidized titanium surfaces by the covalent immobilization of bioactive peptides, through selective reaction involving single functional groups. In the first protocol, an aminoalkylsilane was covalently linked to the Ti oxide layer, followed by covalent binding of glutaric anhydride to the free NH(2) groups. The carboxylic group Of glutaric anhydride was used to condense the free N-terminal group of the side-chain protected peptide sequence. Finally, the Surface was treated with trifluoroacetic acid to deprotect side-chain groups. In the second protocol, the peptide was directly anchored to the Ti oxide surface via UV activation of an arylazide peptide analogue. X-ray photoelectron spectroscopy analyses confirmed that modifications induced onto surface composition were in agreement with the reactions performed. The peptide density of each biomimetic Surface was determined on the basis of radiolabeling and XPS derived reaction yields. The in vitro cellular response of the biomimetic surfaces was evaluated using a primary human osteoblast cell model. Cell adhesion, proliferation, differentiation, and mineralization were examined at initial-, short-, and long-time periods. In was shown that the biomimetic surface obtained through photoprobe-marked analogue that combines an easily-performed modification provides a favorable surface for an enhanced cellular response.

A wide range of biochemical signals promoting cell functions (adhesion, migration, proliferation, and differentiation) and thereby improving the osseointegration process are currently investigated. Unfortunately, their application for the production of bioactive implantable devices is often hampered by their insolubility; instability; and limited availability of a large amount of inexpensive, high-purity samples. An attractive alternative is the use of short peptides carrying the minimum active sequence of the natural factors. Synthetic peptides mapped on fibronectin and vitronectin have been demonstrated to enhance cell adhesion both to polystyrene and acellular bone matrix; in particular, a nonapeptide sequence from human vitronectin works via an osteoblast-specific adhesion mechanism. In this study, we incorporated these peptides into a sol-gel silica dressing applied to coat sand-blasted and acid-attacked titanium samples; measured the kinetic of peptide release; and used titanium disks, coated with a peptide-enriched film, as substrates to determine the peptide concentration that maximizes cell adhesion in vitro. We also evaluated in vivo the capacity of the vitronectin-derived peptide to improve osteogenic activity: histologic analysis revealed markedly improved osteogenic activity around peptide-enriched samples. This article also discusses the role of surface characteristics and the importance of bioactive peptides.

The quality of the early cell/material interactions is responsible for the long-term functional properties of any implanted device. Accordingly, "next generation" dental/orthopedic biomaterials should be able to promote osteoblast adhesion thus improving the integration process between surgically placed implants and biological tissues. Recent studies have identified a wide range of biochemical signals that can be exploited to promote adhesion, migration, proliferation and differentiation of cells. The clinical use of natural factors to promote osteoblast adhesion is complicated because those are often insoluble and unstable macromolecules and, in addition, it is difficult to obtain them in high quantities, with good purity grade and at low cost. A valid alternative could be the use of short peptides carrying the minimum active sequence of the natural macromolecular factor. This paper describes the properties of two classes of peptides, promoting different adhesion mechanisms, to enhance rat bone marrow osteoblast adhesion both to polystyrene and to acellular bone matrix.

Nowadays, the use of implanted devices is a well-acknowledged practice in the field of orthopaedic and dental surgery. Scientific research and clinical experience suggest that the successful exploitation of these devices mainly depends on osseointegration, considered as both anatomical congruency and load-bearing capacity. Indeed, the osseointegration process is influenced by a wide range of factors: anatomical location, implant size and design, surgical procedure, loading effects, biological fluids, age and sex, and, in particular, surface characteristics. For this reason, several attempts have been aimed at modifying implant surface composition and morphology to optimise implant-to-bone contact and improve integration. Preliminary interactions between implanted materials and biological environment are deemed to be governed by the surface properties; they control the amount and quality of cell adhesion on the surface and, consequently, cell/tissue growth. Thus, surface properties govern new bone tissue formation and implant osseointegration. This paper reviews the state of art in the field of physical, chemical and biochemical treatments commonly used on Ti-based biomaterials for the production of biomedical devices. In particular, roughness characteristics due to physical and chemical techniques are investigated; the development of biologically active surfaces by means of biochemical functionalisation is also considered.