Search

The catalytic behavior of a mixture of pectic enzymes, covalently immobilized on different supports (glass microspheres, nylon 6/6 pellets, and PAN beads), was analyzed with a pectin aqueous solution that simulates apple juice. The following parameters were investigated: the rate constant at which pectin hydrolysis is conducted, the time (tau(50)) in which the reduction of 50% of the initial viscosity is reached, and the time (tau(comp,dep)) required to obtain complete depectinization. The best catalytic system was proven to be PAN beads, and their pH and temperature behavior were determined. The yields of two bed reactors, packed or fluidized, using the catalytic PAN beads, were compared to the circulation flow rate of real apple juice. The experimental conditions were as follows: pH 4.0, T = 50 degrees C, and beads volume = 20 cm(3). The initial pectin concentration was the one that was present in our apple juice sample. No differences were observed at low circulation rates, while at higher recirculation rates, the time required to obtain complete pectin hydrolysis into the fluidized reactor was found to be 0.25 times smaller than in the packed bed reactor: 131 min for the packed reactors and 41 min for the fluidized reactors.

Laccase from Trametes versicolor was immobilized by diazotization on a nylon membrane grafted with glycidil methacrylate, using phenylenediamine as spacer and coupling agent. The behavior of these enzyme derivatives was studied under isothermal and nonisothermal conditions by using syringic acid as substrate, in view of the employment of these membranes in processes of detoxification of vegetation waters from olive oil mills. The pH and temperature dependence of catalytic activity under isothermal conditions has shown that these membranes can be usefully employed under extreme pH and temperatures. When employed under nonisothermal conditions, the membranes exhibited an increase of catalytic activity linearly proportional to the applied transmembrane temperature difference. Percentage activity increases ranging from 62% to 18% were found in the range of syringic acid concentration from 0.02 to 0.8 mM, when a difference of 1 degrees C was applied across the catalytic membrane. Because the percentage activity increase is strictly related to the reduction of the production times, the technology of nonisothermal bioreactors has been demonstrated to be an useful tool also in the treatment of vegetation waters from olive oil mills.

A novel packed-bed bioreactor, operating under isothermal and non-isothermal conditions, has been constructed. The core of the apparatus consisted in a polypropylene ring filled with beta-galactosidase immobilized on beads of polyacrylic acid, grafted with dimethylaminoethyl methacrylate. Phenylendiamine and glutaraldehyde were used as spacer and coupling agent, respectively. Two lateral nylon membranes held the enzyme beads into the ring and allowed the occurrence of the process of thermodialysis when the bioreactor was operating under non-isothermal conditions. Comparison of the enzyme activity under isothermal and non-isothermal conditions has shown that in the presence of temperature gradients the rate of lactose hydrolysis was increased, with a reduction of the apparent Km value. Under non-isothermal conditions the percentage increases of enzyme activity were found to decrease with the increase of the substrate concentration. The results have been explained within the frame of reference of the process of thermodialysis., (Copyright 2004 Wiley Periodicals, Inc.)

A hollow-fiber enzyme reactor, operating under isothermal and nonisothermal conditions, was built employing a polypropylene hollow fiber onto which beta-galactosidase was immobilized. Hexamethylenediamine and glutaraldehyde were used as spacer and coupling agent, respectively. Glucose production was studied as a function of temperature, substrate concentration, and size of the transmembrane temperature gradient. The actual average temperature differences across the polypropylene fiber, to which reference was done to evaluate the effect of the nonisothermal conditions, were calculated by means of a mathematical approach, which made it possible to know, using computer simulation, the radial and axial temperature profiles inside the bioreactor and across the membrane. Percent activity increases, proportional to the size of the temperature gradients, were found when the enzyme activities under nonisothermal conditions were compared to those measured under comparable isothermal conditions. Percent reductions of the production times, proportional to the applied temperature gradients, were also calculated. The advantage of employing nonisothermal bioreactors in biotechnological industrial process was discussed.

A new hydrophobic and catalytic membrane was prepared by immobilizing Penicillin G acylase (PGA, EC.3.5.1.11) from E. coli on a nylon membrane, chemically grafted with butylmethacrylate (BMA). Hexamethylenediamine (HMDA) and glutaraldehyde (Glu) were used as a spacer and coupling agent, respectively. PGA was used for the enzymatic synthesis of cephalexin, using D(-)-phenylglycine methyl ester (PGME) and 7-amino-3-deacetoxycephalosporanic acid (7-ADCA) as substrates. Several factors affecting this reaction, such as pH, temperature, and concentrations of substrates were investigated. The results indicated good enzyme-binding efficiency of the pre-treated membrane, and an increased stability of the immobilized PGA towards pH and temperature. Calculation of the activation energies showed that cephalexin production by the immobilized biocatalyst was limited by diffusion, resulting in a decrease of enzyme activity and substrate affinity. Temperature gradients were employed as a way to reduce the effects of diffusion limitation. Cephalexin was found to linearly increase with the applied temperature gradient. A temperature difference of about 3 degrees C across the catalytic membrane resulted into a cephalexin synthesis increase of 100% with a 50% reduction of the production times. The advantage of using non-isothermal bioreactors in biotechnological processes, including pharmaceutical applications, is also discussed., (Copyright 2002 Wiley Periodicals, Inc.)

Abstract: The bioremediation of waters polluted by Bisphenol A, taken as a model for endocrine disruptors, has been pursued by means of catalytic membranes in bioreactors operating under isothermal and non-isothermal conditions. Laccase from Trametes versicolor was immobilized on nylon membranes grafted with Glycidyl Methacrylate and using Phenylendiamine as spacer. The behaviour of the catalytic membrane was studied as a function of BPA concentration. Affinities of immobilized laccase towards BPA were found to increase with average temperature and under non-isothermal conditions. Percentage increases of enzyme activity, proportional to the applied temperature differences, were found to decrease with the increase of BPA concentrations. Interestingly, the highest levels of BPA biodegradation occurred at the lowest concentrations, in other words those present in wastewaters given the small water solubility of this compound. The results are discussed in terms of the process of thermodialysis by considering the additional BPA fluxes towards the immobilized enzymes driven by the temperature gradients. [Copyright &y& Elsevier]