Search

Direct interspecies electron transfer (DIET) via conductive materials can provide significant benefits to anaerobic methane formation in terms of production amount and rate. Although granular activated carbon (GAC) demonstrated its applicability in facilitating DIET in methanogenesis, DIET in continuous flow anaerobic reactors has not been verified. Here, evidences of DIET via GAC were explored. The reactor supplemented with GAC showed 1.8-fold higher methane production rate than that without GAC (35.7 versus 20.1±7.1mL-CH4/d). Around 34% of methane formation was attributed to the biomass attached to GAC. Pyrosequencing of 16S rRNA gene demonstrated the enrichment of exoelectrogens (e.g. Geobacter) and hydrogenotrophic methanogens (e.g. Methanospirillum and Methanolinea) from the biomass attached to GAC. Furthermore, anodic and cathodic currents generation was observed in an electrochemical cell containing GAC biomass. Taken together, GAC supplementation created an environment for enriching the microorganisms involved in DIET, which increased the methane production rate., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A fermentative strategy with an anaerobic moving bed biofilm reactor (AMBBR) was used for the treatment of domestic wastewater. The feasibility of using a membrane separation technique for post-treatment of anaerobic bio-effluent was evaluated with emphasis on employing a membrane distillation (MD). Three different hydrophobic 0.2 μm membranes made of polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), and polypropylene (PP) were examined in this study. The initial permeate flux of the membranes ranged from 2.5 to 6.3 L m(-2) h(-1) when treating AMBBR effluent at a temperature difference between the feed and permeate streams of 20 °C, with the permeate flux increasing in the order PP < PVDF < PTFE. The permeate flux of the PTFE membrane gradually decreased to 84% of the initial flux after the 45 h run for distillation, while a flux decline in MD with either the PVDF or PP membrane was not found under the identical distillation conditions. During long-term distillation with the PVDF membrane, total phosphorus was completely rejected and >98% rejection of dissolved organic carbon was also achieved. The characterization of wastewater effluent organic matter (EfOM) using an innovative suite of analytical tools verified that almost all of the EfOM was rejected via the PVDF MD treatment., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

We evaluated the feasibility of co-digesting molasses wastewater and sewage sludge in a two-stage hydrogen- and methane-producing system. The highest energy was recovered at the 21-h hydraulic retention time (HRT) of the first hydrogenic reactor and at 56-h HRT of the secondary methanogenic reactor. Hence, the two-stage system recovered 1,822 kJ from 1 L of the mixed wastes (19.7: hydrogenic reactor plus, 1,802 kJ L(-1): methanogenic reactor). Despite the overloaded VFA-run with a short HRT of 56 h, the GAC-CH4 reactor increased methane production rate and yields due to enhanced pH buffer capacity. An RNA-based community analysis showed that the Ethanoligenens and Methanosaeta dominated the hydrogen and methane bioreactor, respectively. The two-stage system of co-digesting molasses and sewage sludge is particularly cost-effective due to non-pretreatment of sewage sludge.

Despite significant research efforts over the last few decades, membrane fouling in anaerobic membrane bioreactors (AnMBRs) remains an unsolved problem that increases the overall operational costs and obstructs the industrial applications. Herein, we developed a method for effectively controlling the membrane fouling in a sponge-submerged AnMBRs using an anaerobic rotary disk MBR (ARMBR). The disk rotation led the effective collision between the sponge and membrane surface; thus successfully enhanced the membrane permeability in the ARMBR. The effect of the disk rotational speed and sponge volume fraction on the membrane permeability and the relationship between the water flow direction and membrane permeability were investigated. The long-term feasibility was tested over 100days of synthetic wastewater treatment. As a result, stable and economical performance was observed without membrane replacement and washing. The proposed integrated rotary disk-supporting media appears to be a feasible and even beneficial option in the AnMBR technology., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Non-woven fabric filter- (NWFF) and microfilter-MBR modules were made using 100 μm polypropylene and 0.25 μm polyethylene materials, respectively. The performances and mechanisms of the two processes were investigated, including additional batch filtration tests to find the function of the dynamic gel layer on the membrane surface. The HRT of both MBRs was 9 h and the operating permeate flux was 13 L/m(2)/h. The two MBRs consisted of an anoxic and aerobic reactor. The NWFF or microfilter (MF) was submerged in each of the aerobic reactors. The two MBRs showed similar performances for the removal of organic matters, suspended solids and nitrogen. Cake formation on the NWFF contributed to major resistance, while the gel layer on the microfilter or internal fouling of the pores played a key role in the fouling of the membrane surface. The amount of soluble extracellular polymer substances (EPS) (13 mg/L) of the attached sludge on the NWFF surface was larger than that (11 mg/L) of that suspended sludge. Consequently, the functional gel layer for the coarse and microfilter is established based on the relationship among the EPS, transmembrane pressure and MLSS.

Growing attention is given to pharmaceutical residue in the water environment. It is known that pharmaceuticals are able to survive from a series of wastewater treatment processes. Concerns regarding pharmaceutical residues are attributed to the fact that they are being detected in water and sediment environment ubiquitously. Pharmaceutical treatment using a series of wastewater treatment processes of the DAF (dissolved air flotation)-MBR (membrane bioreactor)-ozone oxidation was conducted in the study. DAF, without addition of coagulant, could remove COD(cr) (chemical oxygen demand by Cr) up to over 70%, BOD 73%, SS 83%, T-N 55%, NH₄(+) 23%, and T-P 65% in influent of municipal wastewater. Average removal rates of water quality parameters by the DAF-MBR system were very high, e.g. COD(cr) 95.88%, BOD₅ 99.66%, COD(mn) (chemical oxygen demand by Mn) 93.63%, T-N 69.75%, NH₄-N 98.46%, T-P 78.23%, and SS 99.51%, which satisfy effluent water quality standards. Despite the high removal rate of the wastewater treatment system, pharmaceuticals were eliminated to be about 50-99% by the MBR system, depending on specific pharmaceuticals. Ibuprofen was well removed by MBR system up to over 95%, while removal rate of bezafibrate ranged between 50 and 90%. With over 5 mg/l of ozone oxidation, most pharmaceuticals which survived the DAF-MBR process were removed completely or resulted in very low survival rate within the range of few micrograms per litre. However, some pharmaceuticals such as bezafibrate and naproxen tended to be resistant to ozone oxidation.