Search

Simultaneous detection of live and dead bacteria is a huge challenge for food safety. To solve this issue, an all-in-one biosensor for bacteria was developed using the phage-apoferritin@CuO 2 (phage-Apo@CP) probe on an antimicrobial peptide (AMP)/MXenes-modified detection platform. With the specific recognition of AMP and phage-Apo@CP, the biosensor for the target Escherichia coli O157:H7 (E. coli O157:H7) presented multi-mode (bioluminescent, colorimetric, and electrochemical) signals to simultaneously measure live and dead bacteria. The bioluminescent signal caused by the adenosine triphosphate (ATP) from the bacteria was used to quantify live bacteria. The colorimetric and voltammetric signals triggered by ·OH and Cu 2+ from the probe with the assistance of acid could rapidly screen and quantitative determination of total E. coli O157:H7 concentration. Thus, the dead one was obtained according to the total and live ones. All three signals could be mutually corrected to improve the accuracy. The biosensor was successfully used for on-site measurement of live and dead E. coli O157:H7 in food samples with the limit of detection of 30 CFU/mL for live ones and 6 CFU/mL for total bacteria within 50 min. This work presents a novel pathway for rapid and simultaneous quantification of both live and dead bacteria., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Multicolor fluorescence probes can show fluorescence of different colors when detecting different targets, and the excellent feature can create a highly differentiated multicolor sensing platform. However, most of the previously reported multicolor luminescent materials usually suffer from high toxicity and photobleaching, complex preparation procedures, and poor water solubility, which may not be conducive to bioanalytical applications. Two-dimensional metal organic frameworks (2D MOFs), which have large specific surface areas with long-range fluorescence quenching coupled with biomolecular recognition events, have encouraged innovation in biomolecular probing. Here, we propose a 2D-MOF-based multicolor fluorescent aptamer nanoprobe using a double stirring bar assisted target replacement system for enzyme-free signal amplification. It utilizes the interaction between 2D MOFs and DNA molecules to detect multiple antibiotics quickly, sensitively, and selectively. Since 2D MOFs have excellent quenching efficiency for luminescence of fluorescent-dye-labeled single-strand DNA (ssDNA), the background fluorescence can be largely reduced and the signal-to-noise ratio can be improved. When the adsorbed ssDNA formed double helix double-stranded DNA with its complementary ssDNA, its fluorescence can be almost fully recovered. The assay was tested by detecting chloramphenicol (CAP), oxytocin (OTC), and kanamycin (KANA) in biological samples. The developed aptasensor was sufficiently sensitive to detect the antibiotic residues as low as 1.5 pM CAP, 2.4 pM OTC, and 1 pM KANA (S/N = 3). It has been preliminarily used for multicolor imaging of three different antibiotics in fish tissue slices with satisfactory results.

The development of multiplex assays to simultaneously monitor multiclass chemical contaminants that commonly coexist in foods, such as heavy metal ions, antibiotics, and estrogen residues, is gaining attention. Here, a microfluidic chip (MC)-based multianalysis method coupled with magnetic encoded aptamer probes was used for simultaneous detection of kanamycin, 17β-estradiol, and lead ion (Pb 2+ ). Using this innovative strategy, the magnetic bead (MB)-based encoded probes labeled with aptamer hybrid chains were first used to selectively capture multiple targets, followed by generating single-stranded primers. The primers triggered a multibranched hybridization chain reaction (mHCR). Finally, three kinds of complementary strands (C-DNAs) with different lengths were hybridized with the arms of the mHCR products to form three types of multibranched DNA nanostructures. The decrement signals of C-DNAs were employed for qualification of targets. As the signal tags corresponded to different targets, the DNA nanostructures realized "one target for the decrease of massive C-DNAs" to improve sensitivity. The use of MB-based encoded probes could achieve magnetic separation to eliminate interference in the complex. The detection limits of this method were 1.76 × 10 -4 nM (kanamycin), 1.18 × 10 -4 nM (17β-estradiol), and 1.29 × 10 -4 nM (lead ion). Furthermore, the MC platform is reusable and can be used for more than 4000 samples. The assay combining the MC with MB-based encoded probes with multibranched DNA signal tags offers a universal, reusable, and high-throughput detection platform for screening multiclass chemical contaminants in food samples with complex matrices.

Simultaneous and sensitive detection of various antibiotic residues in one sample is essential to evaluation of food safety status. Herein, a multiplexed electrochemical aptasensor for multiplex antibiotics detection, with kanamycin (KANA) and ampicillin (AMP) as representative analytes, was designed by using metal ions encoded apoferrtin probes and double stirring bars-assisted target recycling for signal amplification. The encoded probes were prepared by apoferritin loading Cd 2+ and Pb 2+ ions and labeling with duplex DNAs (aptamers corresponding to KANA and AMP hybrid with its complementary DNA sequence), respectively. In the presence of KANA and AMP, the targets can recurrently react with the probes on the bars, and then replace a lot of Apo-Mencoded signal tags into supernatant. The peak currents of Cd 2+ and Pb 2+ from the tags corresponding with the concentrations of KANA and AMP were detected by square wave voltammetry in one run. As a result, KANA and AMP can be detected simultaneously within the range from 0.05 pM to 50 nM. And the detection limits were 18 fM KANA and 15 fM AMP (S/N = 3). The assay was testified to detect KANA and AMP residues with consistent results of ELISA in samples, e.g. milks and fishes. The assay was highly-sensitive, selective, cost-effective and easy-to-operate due to Apo-M encoded probes with high loading capacity of signal source substances. Moreover, double stirring bar-assisted target recycling, which was enzyme-free and could overcome matrix interference, was fabricated for signal amplification. Thus, the assay showed potential advantages for sensitively screening of antibiotic residues in foods., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A ratiometric and sensitive microfluidic chip based aptasensor was developed for antibiotic detection with kanamycin (Kana) as a model analyte. A novel stir bar assisted sorptive extraction and rolling circle amplification strategy was designed to largely amplify the signal and overcome complex matrix interference in food samples. The detection mechanism was as follows: firstly, many duplex DNA probes (a single-stranded DNA as a primer hybrid with an aptamer sequence) were modified on a stir bar. In the presence of Kana, the probes on the bar could specifically capture Kana and release the primer to trigger RCA in the presence of a circular DNA template (CDT). As the reaction proceeds, the amount of CDT decreased and the number of RCA products increased. It is worth mentioning that they can be efficiently separated and detected using a microfluidic chip. The signal ratio of RCA products and CDT (IR/IC) can be employed to qualify Kana in a wide linear range from 0.8 pg mL-1 to 10 ng mL-1 with a low detection limit of 0.3 pg mL-1. This method exhibited excellent sensitivity and selectivity and can obviously reduce the matrix interference through a ratiometric strategy combined with stir bar extraction. The aptasensor was successfully tested in milk and fish samples, confirming that it can be applied for on-site quantitation of antibiotic residues in foods.

An ultrasensitive colorimetric aptasensor was developed for antibiotics detection, with chloramphenicol (CAP) as model target, using DNAzyme labeled Fe-MIL-88-Pt as novel peroxidase mimic signal tags and target-triggered circular strand-displacement polymerization (CSDP) for signal amplification. The system consists of two components which can partially hybridize with each other: one is capture probe which was formed through immobilizing hairpin DNA containing aptamer sequence on magnetic beads (MB-cDNA), another is signal tag which was constructed through labeling single strand DNAzyme (G-quadruplex/Hemin) which can partially hybrid with cDNA on platinum nanoparticles functionalized Fe-MIL-88 (MIL-88-Pt-DNAzyme). All components of MIL-88, Pt and DNAzyme in the tag can act as peroxidase mimic to triply catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H 2 O 2 into a blue-colored oxidized TMB (oxTMB) for the colorimetric readout. Thus distinctive signal can be observed by naked eye even in presence of 0.02 nM tags. In the presence of target and primer, cDNA loop can open to form cDNA/CAP intermediates, enabling primer to hybridize with the exposed sequences of the cDNA, which initiated target assisted CSDP recycles. Then numerous signal tags were released into supernatant to catalyze TMB for color development. There was a liner relationship between the absorbance and the concentration of CAP in the range of 0.1 pM (0.0323 pg/mL) to 1000 pM (323 pg/mL) with the detection limit of 0.03 pM (0.0097 pg/mL). The ultra-high sensitivity was ascribed to the multiplex catalytic activities from the tags and CSDP based signal amplification. Furthermore, this method can produce signals being observed by naked eye to facilitate in-situ detection and be further extended to detect other antibiotics in food just by simply replacing cDNA on the sensing system., (Copyright © 2018 Elsevier B.V. All rights reserved.)

It is critically important to detect antibiotic residues for monitoring food safety. In this study, an enzyme- and label-free electrochemical aptasensor for antibiotics, with kanamycin (Kana) as a typical analyte, was developed based on a double stir bar-assisted toehold-mediated strand displacement reaction (dSB-TMSDR) for dual-signal amplification. First, we modified two gold electrodes (E-1 and E-2) with different DNA probes (S1/S2 hybrid probe in E-1 and DNA fuel strand S3 in E-2). In the presence of Kana, an S1/S2 probe can be disassembled from E-1 to form an S2/Kana complex in supernatant. The S2/Kana could react with S3 on E-2 to form S2/S3 hybrid and release Kana through TMSDR. After then, the target recycling was triggered. Subsequently, the formed S2/S3 hybrid can also trigger a hybridization chain reaction (HCR). Consequently, the dual-signal amplification strategy was established, which resulted in many long dsDNA chains on E-2. The chains can associate with methylene blue (MB) as redox probes to produce a current response for the quantification of Kana. The assay exhibited high sensitivity and specificity with a detection limit at 16 fM Kana due to the dual-signal amplification. The double stir bars system can both increase phase separation and prevent leakage of DNA fuel to reduce background interference. Moreover, it allows flexible sequence design of the TMSDR probes. The assay was successfully employed to detect Kana residues in food and showed potential application value in food safety detection., (Copyright © 2018 Elsevier B.V. All rights reserved.)

An ultrasensitive electrochemical aptasensor for multiplex antibiotics detection based on endonuclease and exonuclease assisted dual recycling amplification strategy was proposed. Kanamycin and chloramphenicol were selected as candidates. Firstly, aptamers of the antibiotics were immobilized on bar A and then binding with their endonuclease labeled complementary DNA strands to construct enzyme-cleavage probes. Secondly, The nano zirconium-metal organic framework (NMOF) particles with 1,4-benzene-dicarboxylate (BDC) as linker was defined as UiO-66. And its updated version, hierarchically porous UiO-66 (HP-UIO-66) decorated with different electroactive materials as signal tags were synthesized. Then they were immobilized on bar B linked by two duplex DNA strands which can be specifically cleaved by corresponding enzyme-cleavage probes in bar A. Once targets were introduced into system, aptamers can capture them and then release enzyme-cleavage probes. In the presence of exonuclease-I, exonuclease assisted target recycling amplification was triggered and more enzyme-cleavage probes were released into solution. The probes can trigger endonuclease assisted recycles and repeatedly cleave their corresponding duplex DNA strands on bar B then released numerous signal tags into supernatant. Thus two recycling amplification was performed in the system. Finally, MB and Fc in the signal tags were detected by square wave voltammetry after removing bar A/B and the current intensities were correspondent with the concentration of KANA and CAP respectively. Under the optimum condition, the limits of detection for the KANA and CAP were 35fM and 21fM respectively with a wide linear range from 1 × 10 -4 to 50nM. This dual recycling amplification detection system exhibited high sensitivities and specificity. It can be easily extended to detect other targets if changing the corresponding aptamers and has potential application values for screening of multiplex antibiotics residues in food safety., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Novel label-free and multiplex aptasensors have been developed for simultaneous detection of several antibiotics based on a microchip electrophoresis (MCE) platform and target catalyzed hairpin assembly (CHA) for signal amplification. Kanamycin (Kana) and oxytetracycline (OTC) were employed as models for testing the system. These aptasensors contained six DNA strands termed as Kana aptamer-catalysis strand (Kana apt-C), Kana inhibit strand (Kana inh), OTC aptamer-catalysis strand (OTC apt-C), OTC inhibit strand (OTC inh), hairpin structures H1 and H2 which were partially complementary. Upon the addition of Kana or OTC, the binding event of aptamer and target triggered the self-assembly between H1 and H2, resulting in the formation of many H1-H2 complexes. They could show strong signals which represented the concentration of Kana or OTC respectively in the MCE system. With the help of the well-designed and high-quality CHA amplification, the assay could yield 300-fold amplified signal comparing that from non-amplified system. Under optimal conditions, this assay exhibited a linear correlation in the ranges from 0.001ngmL -1 to 10ngmL -1 , with the detection limits of 0.7pgmL -1 and 0.9pgmL -1 (S/N=3) toward Kana and OTC, respectively. The platform has the following advantages: firstly, the aptamer probes can be fabricated easily without labeling signal tags for MCE detection; Secondly, the targets can just react with probes and produce the amplified signal in one-pot. Finally, the targets can be simultaneously detected within 10min in different channels, thus high-throughput measurement can be achieved. Based on this work, it is estimated that this detection platform will be universally served as a simple, sensitive and portable platform for antibiotic contaminants detection in biological and environmental samples., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A mimicking-enzyme-based colorimetric aptasensor was developed for the detection of kanamycin (KANA) in milk using magnetic loop-DNA-NMOF-Pt (m-L-DNA) probes and catalytic hairpin assembly (CHA)-assisted target recycling for signal amplification. The m-L-DNA probes were constructed via hybridization of hairpin DNA H1 (containing aptamer sequence) immobilized magnetic beads (m-H1) and signal DNA (sDNA, partial hybridization with H1) labeled nano Fe-MIL-88NH 2 -Pt (NMOF-Pt-sDNA). In the presence of KANA and complementary hairpin DNA H2, the m-L-DNA probes decomposed and formed an m-H1/KANA intermediate, which triggered the CHA reaction to form a stable duplex strand (m-H1-H2) while releasing KANA again for recycling. Consequently, numerous NMOF-Pt-sDNA as mimicking enzymes can synergistically catalyze 3,3',5,5'-tetramethylbenzidine (TMB) for color development. The aptasensor exhibited high selectivity and sensitivity for KANA in milk with a detection limit of 0.2 pg mL -1 within 30 min. The assay can be conveniently extended for on-site screening of other antibiotics in foods by simply changing the base sequence of the probes.

A novel label-free, universal, and high throughput aptasensor was developed based on a microchip electrophoresis (MCE) platform for automatic detection of antibiotic residues in food. Firstly, chloramphenicol (CAP) was employed as a model to be captured by its aptamer probe (Apt). Then, the partial complementary oligonucleotide of CAP's aptamer (C-DNA) was introduced into the reaction system. Because the Apt-CAP complex can't further hybrid with free C-DNA, the amount of hybrid Apt-C-DNA double strand DNA (dsDNA) was less than that without adding the target. Finally, the above mixture was introduced into the microchip electrophoresis (MCE) platform for detection, both dsDNA and Apt-CAP can be separated and produce different fluorescence signals in the MCE. In a certain concentration range, the ratio of signal between dsDNA and Apt-CAP (I dsDNA /I Apt-CAP ) was proportional to the concentration of targets. Under the optimum conditions, the ratio showed a satisfactory linearity range from 0.008 to 1ng/mL of CAP with a detection limit of 0.003ng/mL. Thus, a universal MCE-based assay was developed for quantifying CAP automatically. The method was also successfully applied in the different food samples for CAP detection, which showed a good recovery (Milk: 91.1-108%, Fish: 86.1-114%) and the results were consistent with that of ELISA. This method owned many merits as follows: firstly, MCE was a high throughput screening platform and the detection time is limited to 3min for each sample. Secondly, the aptamer probes can be directly used for detection without labeling any signal tag which can facilitate the preparation procedures of probes. Thirdly, the operation was easy just by the following steps: firstly, the mixture of aptamer probes were incubated followed adding C-DNA; then measurement was performed. Moreover, the assay with MCE platform can be used to detect other targets just by changing the corresponding aptamer probe; it can even realize simultaneous detection when the targets have aptamers with different number of base pairs. Above all, it's a high- throughput and prospective method which can be applied in high throughput screening of antibiotics in food safety., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The present study aimed to explore a novel triple-amplification electrochemiluminescence (ECL) assay for detecting of chloramphenicol (CAP). This strategy was based on single-stranded DNA-binding protein (SSB) and horseradish peroxidase (HRP) enzyme-linked polymer (EnVision reagent, EV) labeled on Au nanoparticles (EV-Au-SSB) as nanotracer and exonuclease-assisted target recycling. The composite probes were prepared via immunoreactions between the CdS nanocrystal (CdS NC)-functionalized partial complementary DNA and aptamer (CdSNCs/Apt-ssDNA1) as capture probes, and EV-Au-SSB as nanotracer. When the composite probe solution co-existed with CAP and Exo I, the aptamer on the capture probes preferentially combined with CAP, and then CAP-Apt and nanotracer complex were released into the solution. Subsequently, Exo I in the solution could further digest the CAP-Apt from the 3'-end of the aptamer and release CAP, which could participate in further reaction with the probes. It was worth mentioning that EV contained a large number of HRPs on its dendritic chain. In the EV-Au-SSB, Au could enhance ECL intensity of CdS NCs by surface plasmon resonance. What's more, HRPs on EV could catalyze the reaction of H2O2, which could obviously enhance ECL intensity of CdS NCs. This study demonstrated excellent performance of the triple-amplification ECL assay, which makes this aptasensor system suitable and promising for the practical application of CAP residues in fish samples. Moreover, the assay might provide a promising avenue to develop efficient aptasensors to determine small-molecule harmful substances in environmental monitoring and food safety., (Copyright © 2016 Elsevier B.V. All rights reserved.)

An ultrasensitive electrochemical aptasensor for simultaneous detection of oxytetracycline (OTC) and kanamycin (KAN) has been developed based on metal ions doped metal organic frame materials (MOFs) as signal tracers and RecJ f exonuclease-catalyzed targets recycling amplification. The aptasensor consists of capture beads (the anti-single-stranded DNA Antibody, as anti-ssDNA Ab, labeled on Dynabeads) and nanoscale MOF (NMOF) based signal tracers (simplified as Apts-MNM, the NMOF labeled with metal ions and the aptamers). Particularly, the MOF (UiO-66-NH 2 ), with large internal surface areas, ultrahigh porosity and abundant amine groups in the pores, was employed as substrates to carry plenty of metal ions (Pb 2+ or Cd 2+ ) and label aptamers of OTC or KAN. Thus, the aptasensor is formed by the specific recognition between anti-ssDNA Ab and aptamers. In the presence of targets (OTC and KAN), aptamers prefer to form targets-Apts-MNM complexes in lieu of anti-ssDNA Ab-aptamer complexes, which results in the dissociation of Apts-MNM from capture beads. With the employment of RecJ f exonuclease, targets-Apts-MNM in supernatant was digested into mononucleotides and liberated the target, which can further participate in the next reaction cycling to produce more signal tracers. After magnetic separation, the enhanced square wave voltammetry (SWV) signals were produced from signal tracers. The aptasensor exhibited a linear correlation in the range from 0.5pM to 50nM, with detection limits of 0.18pM and 0.15pM (S/N=3) toward OTC and KAN respectively. This strategy provides specificity and sensitive approach for multiplex antibiotics detection and has promising applications in food analysis., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this work, a novel homogeneous and signal "off-on" aptamer based fluorescence assay was successfully developed to detect chloramphenicol (CAP) residues in food based on the fluorescence resonance energy transfer (FRET). The vesicle nanotracer was prepared through labeling single stranded DNA binding protein (SSB) on limposome-CdSe/ZnS quantum dot (SSB/L-QD) complexes. It was worth mentioning that the signal tracer (SSB/L-QD) with vesicle shape, which was fabricated being encapsulated with a number of quantum dots and SSB. The nanotracer has excellent signal amplification effects. The vesicle composite probe was formed by combining aptamer labeled nano-gold (Au-Apt) and SSB/L-QD. Which based on SSB's specific affinity towards aptamer. This probe can't emit fluoresce which is in "off" state because the signal from SSB/L-QD as donor can be quenched by the Au-aptas acceptor. When CAP was added in the composite probe solution, the aptamer on the Au-Apt can be preferentially bounded with CAP then release from the composite probe, which can turn the "off" signal of SSB/L-QD tracer into "on" state. The assay indicates excellent linear response to CAP from 0.001 nM to 10 nM and detection limit down to 0.3 pM. The vesicle probes with size of 88 nm have strong signal amplification. Because a larger number of QDs can be labeled inside the double phosphorus lipid membrane. Besides, it was employed to detect CAP residues in the milk samples with results being agreed well with those from ELISA, verifying its accuracy and reliability., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A novel fluorescence aptasensor was successfully developed to respond to chloramphenicol (CAP) in food based on magnetic aptamer-liposome vesicle probe. In order to fabricate it, aptamer labeled on functionalized magnetic beads (MB) was firstly employed as capture adsorbent (MB-Apt), then SSB (single-stranded DNA binding protein) and DIL (1,1'-dioctadecyl-3,3,3',3'-tetramethyl-indocarbocyanineperchlorate) coimmobilized liposomes (SSB/DIL-Lip) was employed as vesicle signal tracer. The composite vesicle probe is formed between SSB/DIL-Lip and MB-Apt based on SSB's specific recognition towards aptamer on vesicle signal tracer. Upon the vesicle probe solution reacted with CAP, the aptamer on the magnetic beads preferentially bounded with CAP, and then released SSB/DIL-Lip vesicle signal tracer in the supernatant after magnetic separation. The released tracer can emit fluorescence which was correspondence with the concentration of the analyte. At the optimum conditions, the aptasensor exhibited a good linear response for CAP detection in the range of 0.003-10nM with a detection limit of 1pM. Importantly, the methodology was further validated for analyzing CAP in fish samples with consistent results obtained by ELISA kit, thus providing a promising approach for quantitative monitoring of CAP and significant anti-interference ability in food safety., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A multiplex electrochemical aptasensor was developed for simultaneous detection of two antibiotics such as chloramphenicol (CAP) and oxytetracycline (OTC), and high-capacity magnetic hollow porous nanotracers coupling exonuclease-assisted target recycling was used to improve sensitivity. The cascade amplification process consists of the exonuclease-assisted target recycling amplification and metal ions encoded magnetic hollow porous nanoparticles (MHPs) to produce voltammetry signals. Upon the specific recognition of aptamers to targets (CAP and OTC), exonuclease I (Exo I) selectively digested the aptamers which were bound with CAP and OTC, then the released CAP and OTC participated new cycling to produce more single DNA, which can act as trigger strands to hybrid with nanotracers to generate further signal amplification. MHPs were used as carriers to load more amounts of metal ions and coupling with Exo I assisted cascade target recycling can amplify the signal for about 12 folds compared with silica based nanotracers. Owing to the dual signal amplification, the linear range between signals and the concentrations of CAP and OTC were obtained in the range of 0.0005-50 ng mL(-1). The detection limits of CAP and OTC were 0.15 and 0.10 ng mL(-1) (S/N=3) which is more than 2 orders lower than commercial enzyme-linked immunosorbent immunoassay (ELISA) method, respectively. The proposed method was successfully applied to simultaneously detection of CAP and OTC in milk samples. Besides, this aptasensor can be applied to other antibiotics detection by changing the corresponding aptamer. The whole scheme is facile, selective and sensitive enough for antibiotics screening in food safety., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A novel multiplexed ratiometric biosensor array was fabricated on a homemade screen-printed carbon electrode (SPCE) for near-simultaneous detection of microRNA (miRNA)-21 and miRNA-141 based on electrochemiluminescence (ECL) coupled with cyclic voltammetry (CV) method. In the detection system, the ECL signal tags (Ru-SiO2@PLL-Au) were fabricated using poly-l-lysine (PLL) as bridging agent and co-reactant to connect Ru-SiO2 (Ru(bpy)3(2+)-doped silica) and gold nanoparticles (Au NPs), which were respectively modified on two spatial resolved working electrodes (WE1 and WE2) of SPCE. Then the ferrocene (Fc)-labeled hairpin DNA (Fc-HDNA1 and Fc-HDNA2) as CV signal tags and ECL quenching material were immobilized on Ru-SiO2@PLL-Au. Upon miRNA-21 and miRNA-141 adding, the target miRNAs could hybridize with corresponding Fc-HDNA, which could lead to Fc away from Ru-SiO2@PLL-Au. Such conformational changes could recover the ECL of Ru-SiO2@PLL-Au and decreased the CV current of Fc, respectively. This "signal-on" of ECL and "signal-off" of CV were employed for dual-signal ratiometric readout. With the help of a multiplexed switch, two dual-signals from WE1 and WE2 were used for multiplexed detection of miRNA-21 and miRNA-141 down to 6.3 and 8.6fM, respectively. This approach was used in real sample analysis and has significant potential for miRNA biomarkers detection in a clinical laboratory setting., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A selective and facile fluorescence "switch-on" scheme is developed to detect antibiotics residues in food, using chloramphenicol (CAP) as model, based on a novel magnetic aptamer probe (aptamer-Pt-luminol nanocomposite labeled with hemin/G-quadruplex). Firstly, the composite probe is prepared through the immuno-reactions between the capture beads (anti-dsDNA antibody labeled on magnetic Dynabeads) and the nanotracer (nano-Pt-luminol labeled with double-strand aptamer, as ds-Apt, and hemin/G-quadruplex). When the composite probe is mixed with CAP, the aptamer preferentially reacted with CAP to decompose the double-strand aptamer to ssDNA, which cannot be recognized by the anti-dsDNA antibody on the capture probes. Thus, after magnetic separation, the nanotracer can be released into the supernatant. Because the hemin/G-quadruplex and PtNPs in nanotracer can catalyze luminol-H2O2 system to emit fluorescence. Thus a dual-amplified "switch-on" signal appeared, of which intensity is proportional to the concentration of CAP between 0.001 and 100ng mL(-1) with detection limit of 0.0005ng mL(-1) (S/N=3). Besides, our method has good selectivity and was employed for CAP detection in real milk samples. The results agree well with those from conventional gas chromatograph-mass spectrometer (GC-MS). The switch-on signal is produced by one-step substitution reaction between aptamer in nanotracer and target. When the analyte is changed, the probe can be refabricated only by changing the corresponding aptamer. Thus, all features above prove our strategy to be a facile, feasible and selective method in antibiotics screening for food safety., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Herein, an ultrasensitive and selective colorimetric assay for antibiotics, using chloramphenicol (CAP) as the model analyte, was developed based on magnetic aptamer-HRP-platinum composite probes and exonuclease-assisted target recycling. The composite probes were prepared through immunoreactions between the double stranded DNA antibody (anti-DNA) labeled on core-shell Fe3O4@Au nanoparticles (AuMNP-anti-DNA) as the capture probe, and the double stranded aptamer (aptamer hybrid with its complementary oligonucleotides) labeled on Pt@HRP nanoparticles as the nanotracer (ds-Apt-HRP-PtNPs). When the CAP samples were incubated with the probes for 30 min at room temperature, they could be captured by the aptamer to form a nanotracer-CAP complex, which was then released into the supernatant after magnetic separation. This is because the anti-DNA on the capture probes cannot recognize the single strand aptamer-CAP complex. The exonuclease I (Exo I) added into the supernatant can further digest the aptamer-CAP from the 3'-end of the aptamer and the CAP in the aptamer-CAP complex can be released again, which can further participate in a new cycling process to react with the probes. Pt and HRP in the nanotracer could both catalyze and dual amplify the absorbance at 650 nm ascribed to the 3,3',5,5'-tetramethylbenzidine (TMB)-H2O2 system. Moreover, Exo I can assist the target recycling, which can further amplify the signal. Thus, the triple amplified signal can be quantified by ultraviolet-visible spectroscopy. The experimental results showed that the CAP detection possessed a linear range of 0.001-10 ng mL(-1) and a detection limit of 0.0003 ng mL(-1) (S/N = 3). The assay was successfully employed to detect CAP in milk, which is much more facile, time saving, and sensitive than the commercial ELISA kits.

A portable and antibody-free sandwich assay was fabricated for determination of chloramphenicol (CAP) in animal-derived food by a personal glucose meter (PGM). The sandwich-type strategy was developed on the basis of magnetic molecularly imprinted probe (m-MIP) nanoparticles and a β-cyclodextrin/invertase-functionalized signal tag. Firstly, the m-MIPs were fabricated using polydopamine molecularly imprinted film modified Fe3O4 nanoparticles with 2,2-dichloroacetamide as a template that could capture the 2,2-dichloroacetamide segment of CAP. Secondly, β-cyclodextrin/invertase polymer bioconjungate was synthesized as a signal tag that could recognize the nitrobenzene segment of CAP through host-guest interaction. The dual-specificity recognition model relies on the formation of a sandwich between m-MIPs, different segments of CAP, and the β-cyclodextrin-functionalized signal tag. The sandwich-type complex formed was then subjected to detection with a PGM. The complexes can hydrolyze sucrose to glucose, which can be used for detection with a PGM through invertase. According to our experiment, the concentration of CAP was proportional to the amount of glucose formed, which could quantitatively assess the CAP with a dynamic range of 0.5-50 ng mL(-1) and a detection limit of 0.16 ng mL(-1) (signal-to-noise ratio of 3). The detection time of the assay was about 1 h, which was obviously shorter than that of competitive ELISA. More importantly, we have successfully applied this on-site assay for CAP screening in animal-derived food.

A novel and sensitive sandwich-type electrochemiluminescence (ECL) immunosensor was fabricated on a glassy carbon electrode (GCE) for ultra trace levels of α-fetoprotein (AFP) based on sandwich immunoreaction strategy by enrichment using magnetic capture probes and quantum dots coated with Au shell (CdS-Au) as the signal tag. The capture probe was prepared by immobilizing the primary antibody of AFP (Ab1) on the core/shell Fe(3)O(4)-Au nanoparticles, which was first employed to capture AFP antigens to form Fe(3)O(4)-Au/Ab1/AFP complex from the serum after incubation. The product can be separated from the background solution through the magnetic separation. Then the CdS-Au labeled secondary antibody (Ab2) as signal tag (CdS-Au/Ab2) was conjugated successfully with Fe(3)O(4)-Au/Ab1/AFP complex to form a sandwich-type immunocomplex (Fe(3)O(4)-Au/Ab1/AFP/Ab2/CdS-Au), which can be further separated by an external magnetic field and produce ECL signals at a fixed voltage. The signal was proportional to a certain concentration range of AFP for quantification. Thus, an easy-to-use immunosensor with magnetic probes and a quantum dots signal tag was obtained. The immunosensor performed at a level of high sensitivity and a broad concentration range for AFP between 0.0005 and 5.0 ng mL(-1) with a detection limit of 0.2 pg mL(-1). The use of magnetic probes was combined with pre-concentration and separation for trace levels of tumor markers in the serum. Due to the amplification of the signal tag, the immunosensor is highly sensitive, which can offer great promise for rapid, simple, selective and cost-effective detection of effective biomonitoring for clinical application., (Copyright © 2012 Elsevier B.V. All rights reserved.)

An ultrasensitive and renewable electrochemiluminescence (ECL) immunosensor was developed for the detection of tumor markers by combining a newly designed trace tag and streptavidin-coated magnetic particles (SCMPs). The trace tag (RuL@SiO(2)-Au~RuL-Ab2) was prepared by loading Ru(bpy)(3)(2+)(RuL)-conjuged secondary antibodies (RuL-Ab2) on RuL@SiO(2) (RuL-doped SiO(2)) doped Au (RuL@SiO(2)-Au). To fabricate the immunosensor, SCMPs were mixed with biotinylated AFP primary antibody (Biotin-Ab1), AFP, and RuL@SiO2-Au~RuL-Ab2 complexes, then the resulting SCMP/Biotin-Ab1/AFP/RuL@SiO2-Au~RuL-Ab2 (SBAR) sandwich-type immunocomplexes were absorbed on screen printed carbon electrode (SPCE) for detection. The immunocomplexes can be easily washed away from the surface of the SPCE when the magnetic field was removed, which made the immunosensor reusable. The present immunosensor showed a wide linear range of 0.05-100 ng mL(-1) for detecting AFP, with a low detection limit of 0.02 ng mL(-1) (defined as S/N = 3). The method takes advantage of three properties of the immunosensor: firstly, the RuL@SiO(2)-Au~RuL-Ab2 composite exhibited dual amplification since SiO(2) could load large amount of reporter molecules (RuL) for signal amplification. Gold particles could provide a large active surface to load more reporter molecules (RuL-Ab2). Accordingly, through the ECL response of RuL and tripropylamine (TPA), a strong ECL signal was obtained and an amplification analysis of protein interaction was achieved. Secondly, the sensor is renewable because the sandwich-type immunocomplexes can be readily absorbed or removed on the SPCE's surface in a magnetic field. Thirdly, the SCMP modified probes can perform the rapid separation and purification of signal antibodies in a magnetic field. Thus, the present immunosensor can simultaneously realize separation, enrichment and determination. It showed potential application for the detection of AFP in human sera.