Search

The production of acetone, butanol, and ethanol (ABE) by fermentation is a process that had been used by industries for decades. Two stage immobilized column reactor system integrated with liquid-liquid extraction was used with immobilized Clostridium acetobutylicum DSM 792, to enhance the ABE productivity and yield. The sugar mixture (glucose, mannose, galactose, arabinose, and xylose) representative to the lignocellulose hydrolysates was used as a substrate for continuous ABE production. Maximum total ABE solvent concentration of 20.30 g L(-1) was achieved at a dilution rate (D) of 0.2h(-1), with the sugar mixture as a substrate. The maximum solvent productivity (10.85 g L(-1)h(-1)) and the solvent yield (0.38 g g(-1)) were obtained at a dilution rate of 1.0 h(-1). The maximum sugar mixture utilization rate was achieved with the present set up which is difficult to reach in a single stage chemostat. The system was operated for 48 days without any technical problems., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The objective of this study was to optimize continuous acetone-butanol-ethanol (ABE) fermentation using a two stage chemostat system integrated with liquid-liquid extraction of solvents produced in the first stage. This minimized end product inhibition by butanol and subsequently enhanced glucose utilization and solvent production in continuous cultures of Clostridium acetobutylicum B 5313. During continuous two-stage ABE fermentation, sugarcane bagasse was used as the cell holding material for the both stages and liquid-liquid extraction was performed using an oleyl alcohol and decanol mixture. An overall solvent production of 25.32g/L (acetone 5.93g/L, butanol 16.90g/L and ethanol 2.48g/L) was observed as compared to 15.98g/L in the single stage chemostat with highest solvent productivity and solvent yield of 2.5g/Lh and of 0.35g/g, respectively. Maximum glucose utilization (83.21%) at a dilution rate of 0.051/h was observed as compared to 54.38% in the single stage chemostat., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

SO2-ethanol-water (SEW) spent liquor from spruce chips was successfully used for batch and continuous production of acetone, butanol and ethanol (ABE). Initially, batch experiments were performed using spent liquor to check the suitability for production of ABE. Maximum concentration of total ABE was found to be 8.79 g/l using 4-fold diluted SEW liquor supplemented with 35 g/l of glucose. The effect of dilution rate on solvent production, productivity and yield was studied in column reactor consisting of immobilized Clostridium acetobutylicum DSM 792 on wood pulp. Total solvent concentration of 12 g/l was obtained at a dilution rate of 0.21 h(-1). The maximum solvent productivity (4.86 g/l h) with yield of 0.27 g/g was obtained at dilution rate of 0.64 h(-1). Further, to increase the solvent yield, the unutilized sugars were subjected to batch fermentation., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

In present times, the immunosuppressants have gained considerable importance in the world market. Cyclosporin A (CyA) is a cyclic undecapeptide with a variety of biological activities including immunosuppressive, anti-inflammatory, antifungal and antiparasitic properties. CyA is produced by various types of fermentation techniques using Tolypocladium inflatum. In the present review, we discuss the biosynthetic pathway, fermentative production, downstream processing and pharmacological activities of CyA., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Clostridium beijerinckii DSM 6423 was studied using different continuous production methods to give maximum and stable production of isopropanol and n-butanol. In a single-stage continuous culture, when wood pulp was added as a cell holding material, we could increase the solvent productivity from 0.47 to 5.52 g L h with the yield of 54% from glucose. The overall solvent concentration of 7.51 g L (39.4% isopropanol and 60.6% n-butanol) with the maximum solvent productivity of 0.84 g L h was obtained with two-stage continuous culture. We were able to run the process for more than 48 overall retention times without losing the ability to produce solvents. [ABSTRACT FROM AUTHOR]

Vitamins are defined as essential micronutrients that are required in trace quantity and cannot be synthesized by mammals. Apart from their in vivo nutritional and physiological roles as growth factors for men, animals, plants and microorganisms, vitamins are now being increasingly introduced as food/feed additives, as medical-therapeutic agents, as health aids, and also as technical aids. Production of vitamins by chemical synthesis, or extraction from their known sources has serious disadvantages. This led to an increased interest in substituting these processes with biotechnological processes. For several of these compounds microbiological and algal processes exist, or are rapidly emerging. Different methods like media optimization, mutation and screening, genetic engineering and biocatalyst conversion have been used for improvement of the production of vitamins. The survey describes the current state of vitamin production by biotechnological processes and their significance, as compared to the existing chemical processes. [ABSTRACT FROM AUTHOR]