Search

Foods and beverages with excessive tannins acid (TA) content taste astringent and bitter. The overconsumption of TA could result in nutritional and digestive problems. In this study, the cellulose nanocrystals (CNC)/fish swim bladder gelatin (FG) composite sponge was prepared with glutaraldehyde as a crosslinking agent. The TA adsorption performance of the sponge was discussed. The freeze-dried CNC/FG composite sponge had a porous network structure. CNC was combined into the FG matrix as a reinforcing phase. The mechanical strength, thermal stability, and swelling properties of the composite sponge were improved with the addition of an appropriate amount of CNC. Although CNC decreased the porosity of composite sponge, the increase in active adsorption sites resulted in an overall positive effect on its TA adsorption properties. Under the optimal adsorption conditions, the TA removal rate of 1.0 % CNC composites reached 80.4 %. Furthermore, the sponge retained a TA removal rate of 54 % after five cycles of adsorption and desorption using 50 % ethanol. The results demonstrated that CNC/FG composite sponge has application potential in the field of adsorption materials for TA. [Display omitted] • Porous fish gelatin sponge is capable of removing tannic acid. • Cellulose nanocrystals additives bonded with fish gelatin through hydrogen bonds. • Additives improved mechanical strength, thermal stability, and swelling property. • 1 % cellulose nanocrystals addition achieved best tannic acid removal (80.4 %). • Composite sponge's adsorption follows the pseudo-second-order kinetic model. [ABSTRACT FROM AUTHOR]

Non-powered adaptive systems are attractive in the construction of environment actuators, meteorosensitive architectures, biomedical devices, and soft robotics. Combining hydrophilic materials and anisotropic structures to mimic self-morphing plant structures has been demonstrated as an effective approach to creating artificial hygromorphs. The convenience of 3D printing technologies in shaping programmable complex structures facilitates the imitation of complex anisotropic plant structures. In this research, we constructed a bio-hygromorph using fish swim bladder hydrogel as the hydrophilic material and wood flour-filled polylactic acid (WPLA) scaffold, which was printed with fused deposition modeling (FDM) 3D printing technology (3DP). The environmental benign bio-hygromorph displayed morphing abilities triggered by moisture content changes, as the fish swim bladder hydrogel swelled and shrunk during absorption and desorption cycles. The strain disproportion of the two-layered composite structure in the bio-hygromorph drove the bending deformation. Stress analyses performed with finite element analysis (FEA) also revealed the mechanism behind the moisture content driven morphing of the bio-hygromorph. Notably, the bio-hygromorph exhibited faster response times to moisture absorption than desorption, which may donate actuators' different attributes in distinct moisture conditions. [ABSTRACT FROM AUTHOR]