Search

Purpose: Environmental sustainability in medicine is a growing concern. Determining the carbon footprint of medical procedures may aid in selecting a less impactful technique moving forward. The purpose of this study was to understand the environmental impact of different anterior cruciate ligament reconstruction techniques, for which there is no consensus in terms of optimal graft. Methods: A life cycle analysis of different anterior cruciate ligament reconstruction techniques was performed. These included quadrupled semitendinosus graft, bone‐patellar tendon‐bone graft, iliotibial band augmented with gracilis graft, doubled semitendinosus and doubled gracilis graft, and quadriceps tendon graft. All procedures were systematically paired with a lateral extra‐articular procedure. The study was conducted in a specialised centre using surgeon preference cards, with the help of a dedicated organisation for calculation according to the ISO 14044 standard. The primary outcome measure was the carbon footprint of each of the five techniques. Secondary outcomes included other environmental impact indicators, including human carcinogenic toxicity and mineral resource scarcity, among others, based on the ReCiPe 2016 midpoint guideline. The analysis had three scopes, each encompassing varying numbers of processes: graft implantation, full procedure, and entire environmental impact, from medical prescription to patient discharge. Results were reported as percentage increases compared to the graft technique with the lowest environmental impact. Results: It was demonstrated that the surgical procedure itself accounted for <40% of the life cycle, with arthroscopy being 88% of surgery's GHG emissions, and scrubbing and draping contributing 39% to the carbon footprint. The iliotibial band augmented with gracilis tendon technique had the lowest carbon footprint (0.199 Kg Co2 eq), and the least impact in most categories at all scopes of the life cycle analysis. Using this technique as a reference, in terms of graft implantation, it was determined that extensor mechanism grafts had the highest carbon footprint (300% higher than the reference). Greater scopes showed a similar trend, with percentage differences decreasing significantly, reaching 1–3% when considering the entire environmental impact for most categories. Nevertheless, among the aforementioned factors of the ReCiPe 2016 guidelines, the semitendinosus graft paried with a lateral extra‐articular procedure displayed greater difference in human carcinogenic toxicity and mineral resource scarcity (6% and 10% respectively) compared to the reference. The individual processes with the highest impact were also highlighted. Conclusions: In the institution where the study was conducted, the studied iliotibial band graft option was found to have the lowest environmental impact. Such analyses of standardised procedures can be replicated in individual institutions in order to determine their environmental impact. Identification of procedures with comparable results and differing environmental consequences may influence the future decision‐making process. Level of Evidence: Level II, prospective cohort study. [ABSTRACT FROM AUTHOR]

Background: Bone–patellar tendon–bone (BTB) anterior cruciate ligament reconstruction (ACLR) is one of the conventional techniques in the revision setting especially after a primary hamstring tendon graft. The use of the iliotibial band (ITB) augmented with allograft (AG) is an encouraging graft alternative for ACLR in terms of clinical and biomechanical data in the literature. Purpose: To compare the clinical outcomes of BTB graft with lateral extra-articular tenodesis, modified Lemaire (BTB-LET), and an ITB graft augmented with hamstring AG (ITB-AG) in the setting of revision ACLR. Study Design: Cohort study; Level of evidence, 3. Methods: Descriptive data and clinical outcomes were prospectively collected from patients who underwent revision ACLR with either the BTB-LET or ITB-AG technique between 2012 and 2020 and who had a minimum follow-up of 2 years. The clinical outcomes were assessed by the Lysholm, Tegner, Anterior Cruciate Ligament–Return to Sport after Injury, International Knee Documentation Committee subjective knee evaluation form, and Knee injury and Osteoarthritis Outcome Score. Return to sports, complications, and revisions were also analyzed. Results: A total of 167 patients were included, with 106 patients in the BTB-LET group and 61 patients in the ITB-AG group. There were no significant group differences in sociodemographic characteristics; however, the mean follow-up was significantly longer in the BTB-LET compared with the ITB-AG group (52.0 vs 38.8 months, respectively; P =.0001). There were no significant differences in postoperative outcome scores; however, patients in the ITB-AG group had a higher rate of return to competitive pivoting sports (32.8% vs 17.9%; P =.0288) and a higher overall rate of return to preinjury sport (63.9% vs 47.2%; P =.0365). Complications, including revisions for meniscal or chondral lesions and retears (8 [8.3%] in the BTB-LET group and 2 [4.0%] in the ITB-AG group), were not significantly different. All retears were due to sports-related accidents. Conclusion: In this study, ITB-AG was not different from BTB-LET in terms of functional outcomes scores but allowed better return to sport rate. Performing ITB-AG reconstruction in the setting of revision ACLR appears to be safe, effective, and associated with a satisfying return-to-sports rate. [ABSTRACT FROM AUTHOR]

Purpose: The Latarjet procedure has shown its efficiency for the treatment of anterior shoulder dislocation. The success of this technique depends on the correct positioning and fusion of the bone block. The length of the screws that fix the bone block can be a problem. They can increase the risk of non-union if too short or be the cause of nerve lesion or soft tissue discomfort if too long. Suprascapular nerve injuries have been reported during shoulder stabilisation surgery up to 6 % of the case. Bone block non-union depending on the series is found around 20 % of the cases. The purpose of this study was to evaluate the efficiency of this CT preoperative planning to predict optimal screws length. The clinical importance of this study lies in the observation that it is the first study to evaluate the efficiency of CT planning to predict screw length.Methods: Inclusion criteria were patients with chronic anterior instability of the shoulder with an ISIS superior to 4. Exclusion criteria were patients with multidirectional instability or any previous surgery on this shoulder. Thirty patients were included prospectively, 11 of them went threw a CT planning, before their arthroscopic Latarjet. Optimal length of both screws was calculated, adding the size of the coracoid at 5 and 15 mm from the tip to the glenoid. Thirty-two-mm screws were used for patients without planning. On a post-operative CT scan with 3D reconstruction, the distance between the screw tip and the posterior cortex was measured. A one-sample Wilcoxon test was used to compare the distance from the tip of the screw to an acceptable positioning of ±2 mm from the posterior cortex.Results: In the group without planning, screw 1 tended to differ from the acceptable positioning: mean 3.44 mm ± 3.13, med 2.9 mm, q1; q3 [0.6; 4.75] p = 0.1118, and screw 2 differed significantly from the acceptable position: mean 4.83 mm ± 4.11, med 3.7 mm, q1; q3 [1.7; 5.45] p = 0.0045. In the group with planning, position of screw 1 or 2 showed no significant difference from the acceptable position: mean 2.45 mm ± 2.07 med 1.8 mm, q1; q3 [1; 3.3] p = 1; mean 2.75 mm ± 2.32 med 2.3 mm, q1; q3 [1.25; 3.8] p = 0.5631.Conclusion: Unplanned Latarjet can lead to inaccurate screw length especially in the lower screw and can increase the risk of non-union and nerve damage. The clinical relevance of this article is that CT planning of screw length before surgery showed good results on post-operative CT. [ABSTRACT FROM AUTHOR]

Purpose: The arthroscopic Latarjet procedure has provided reliable results in the treatment of anterior shoulder instability. However, this procedure remains technically challenging and is related to several complications. The morphology of the coracoid and the glenoid are inconsistent. Inadequate coracoid and glenoid preparing may lead to mismatching between their surfaces. Inadequate screws lengthening and orientation are a major concern. Too long screws can lead to suprascapular nerve injuries or hardware irritation, whereas too short screws can lead to nonunions, fibrous unions or migration of the bone block. The purpose of the study was to investigate the application of virtual surgical planning and digital technology in preoperative assessment and planning of the Latarjet procedure.Methods: Twelve patients planned for an arthroscopic Latarjet had a CT scan evaluation with multi-two-dimensional reconstruction performed before surgery. Interobserver and intraobserver reliability were evaluated. The shape of the anterior rim of the glenoid and the undersurface of the coracoid were classified. Coracoid height was measured, respectively, at 5 mm (C1) and 10 mm (C2) from the tip of the coracoid process, corresponding to the drilling zone. Measurements of the glenoid width were then taken in the axial view at 25 % (G1) and 50 % (G2) of the glenoid height with various α angles (5°, 10°, 15°, 20°, 25°, 30°) 7 mm from the anterior glenoid rim. Shapes of the undersurface of the coracoid and the anterior rim of the glenoid were noted during the surgical procedure. Post-operative measurements included the α angle.Results: Concerning coracoid height measurements, there was an almost perfect to substantial intra- and inter-reliability, with values ranging from ICC = 0.75-0.97. For the shape of the coracoid, concordances were, respectively, perfect (ICC = 1) and almost perfect (0.87 [0.33; 1]) for the intra- and interobserver reliabilities. Concerning the glenoid, concordance was always almost perfect for 50 % height. Concordance was almost perfect for 25 % height 15° and 30° for inter- and intraobserver, for intraobserver at 0° and 25°. All the other values were still showing moderate concordance. Shape of the coracoid analysis reproducibility was perfect for both intra- and interobserver ICC = 1. There was a total agreement (ICC = 1) between the preoperative evaluation of the shape of the glenoid and the coracoid and the intraoperative assessment.Conclusion: The ideal and accurate preoperative planning of screwing of the coracoid graft in the arthroscopic Latarjet can be achieved in the real surgery assisted by the virtual planning. The clinical importance of this study lies in the observation that this new preoperative planning could offer a simple, effective and reproducible tool for surgeons helping them to prepare in the best possible way a technically challenging procedure usually associated with a high rate of complications. [ABSTRACT FROM AUTHOR]

Purpose: The arthroscopic Latarjet procedure is recently becoming an increasingly popular technique. Nevertheless, position and fusion of the autograft had not been well studied yet. The purpose of this study was to assess the positioning of the coracoid graft and the fusion rate on CT scan in the arthroscopic Latarjet procedure.Methods: The study design was a prospective series of 19 consecutive patients who received arthroscopic Latarjet procedure. Radiological assessment on CT scan performed 3 months post-operatively included an analysis of the fusion and the position of the coracoid bone graft using a validated method. 02:30-04:20 was considered an ideal positioning in the sagittal view. In the axial view, the positioning was considered as flush, congruent, medial, too medial, or lateral.Results: The median age of patients was 27.6 (±6.9). Mean operative time was of 161 min ±34.8. The fusion rate was of 78 %. Coracoid grafts were positioned 01:52 h (56° ± 14°) to 4:04 h (122° ± 12.5°). In the axial view, 32 % of the grafts positioning were considered as flush, 38 % as congruent, 30 % as medial, and 6 % too medial. No lateral position was noted. Two complications occurred, one graft fracture during screwing requiring opening conversion and an early case of osteolysis in a medial-positioned graft.Conclusion: The arthroscopic Latarjet procedure is a technically challenging technique that provides satisfactory fusion rate and graft positioning with a low complication rate. The clinical importance of this study lies in the observation that it is the first study to evaluate the position of the coracoid bone graft in arthroscopic Latarjet according to a detailed and validated method.Level Of Evidence: IV. [ABSTRACT FROM AUTHOR]

Introduction: Postoperative spondylodiscitis is a primary infection of the nucleus pulposus with secondary involvement of the cartilaginous endplate and vertebral bone. Although uncommon, postoperative spondylodiscitis causes major morbidity and may be associated with serious long-term sequelae. Several risk factors had been identified, including immunosuppression, obesity, alcohol, smoking, diabetes and malnutrition. Materials and methods: A review of the literature was done to analyse the diagnosis, treatment and prevention of postoperative spondylodiscitis. Results: We found that the principles of conservative treatment are to establish an accurate microbiological diagnosis, treat with appropriate antibiotics, immobilise the spine, and closely monitor for spinal instability and neurological deterioration. The purpose of surgical treatment is to obtain multiple cultures of bone and soft tissue, perform a thorough debridement of infected tissue, decompress neural structures, and reconstruct the unstable spinal column with bone graft with or without concomitant instrumentation. Conclusions: Appropriate management requires aggressive medical treatment and, at times, surgical intervention. If recognised early and treated appropriately, a full recovery can often be expected. Therefore, clinicians should be aware of the clinical presentation of such infections to improve patient outcome. A review of the literature was done to advance our understanding of the diagnosis, treatment, prevention and outcome of these infections. [ABSTRACT FROM AUTHOR]