Search

Unlabelled: The osseointegration of dental implants and their consequent long-term success is guaranteed by the presence, in the extraction site, of healthy and sufficient alveolar bone. Bone deficiencies may be the result of extraction traumas, periodontal disease and infection. In these cases, placement of titanium implants is contraindicated until a vertical bone augmentation is obtained. This goal is achieved using bone graft materials, which should simulate extracellular matrix (ECM), in order to promote osteoblast proliferation and fill the void, maintaining the space without collapsing until the new bone is formed. In this work, we design, develop and characterize a novel, moldable chitosan-pectin hydrogel reinforced by biphasic calcium phosphate particles with size in the range of 100-300μm. The polysaccharide nature of the hydrogel mimics the ECM of natural bone, and the ceramic particles promote high osteoblast proliferation, assessed by Scanning Electron Microscopy analysis. Swelling properties allow significant adsorption of water solution (up to 200% of solution content) so that the bone defect space can be filled by the material in an in vivo scenario. The incorporation of ceramic particles makes the material stable at different pH and increases the compressive elastic modulus, toughness and ultimate tensile strength. Furthermore, cell studies with SAOS-2 human osteoblastic cell line show high cell proliferation and adhesion already after 72h, and the presence of ceramic particles increases the expression of alkaline phosphatase activity after 1week. These results suggest a great potential of the developed moldable biomaterials for the regeneration of the alveolar bone., Statement of Significance: The positive fate of a surgical procedure involving the insertion of a titanium screw still depends on the quality and quantity of alveolar bone which is present in the extraction site. Available materials are basically hard scaffold materials with un-predictable behavior in different condition and difficult shaping properties. In this work we developed a novel pectin-chitosan hydrogel reinforced with ceramic particles. Polysaccharides simulate the extracellular matrix of natural bone and the extensive in vitro cells culture study allows to assess that the incorporation of the ceramic particles promote a pro-osteogenic response. Shape control, easy adaption of the extraction site, predictable behavior in different environment condition, swelling properties and an anti-inflammatory response are the significant characteristics of the developed biomaterial., (Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The paper presents results of physico-chemical and biological investigations of a surface-engineered synthetic bone filler. Surface analysis confirms that the ceramic phosphate granules present a collagen nanolayer to the surrounding environment. Cell cultures tests show that, in agreement with literature reports, surface-immobilized collagen molecular cues can stimulate progression along the osteogenic pathway of undifferentiated human mesenchymal cells. Finally, in vivo test in a rabbit model of critical bone defects shows statistically significant increase of bone volume and mineral apposition rate between the biomimetic bone filler and collagen-free control. All together, obtained data confirm that biomolecular surface engineering can upgrade the properties of implant device, by promoting more specific and targeted implant-host cells interactions.

To endow an implant surface with enhanced properties to ensure an appropriate seal with the host tissue for inflammation/infection resistance, next-generation bone implant collagen–polyphenol nanolayers were built on conventional titanium surfaces through a multilayer approach. X-ray Photoelectron Spectroscopy (XPS) analysis was performed to investigate the chemical arrangement of molecules within the surface layer and to provide an estimate of their thickness. A short-term (2 and 4 weeks) in vivo test of bone implants in a healthy rabbit model was performed to check possible side effects of the soft surface layer on early phases of osteointegration, leading to secondary stability. Results show the building up of the different nanolayers on top of titanium, resulting in a final composite collagen–polyphenol surface and a layer thickness of about 10 nm. In vivo tests performed on machined and state-of-the-art microrough titanium implants do not show significant differences between coated and uncoated samples, as the surface microroughness remains the main driver of bone-to-implant contact. These results confirm that the surface nanolayer does not interfere with the onset and progression of implant osteointegration and prompt the green light for specific investigations of the potential merits of this bioactive coating as an enhancer of the device/tissue seal. [ABSTRACT FROM AUTHOR]

Mesoporous bioactive glass nanoparticles (MBG) are multifunctional building blocks for tissue regeneration and nanomedicine applications. Incorporation of biologically active ions can endow MBG with additional functionalities toward promoted therapeutic effects. Here, boron is incorporated into MBG by using a sol–gel approach. The concentration of boron incorporated is controllable by tuning the amount of boron precursor. Two types of boron‐doped MBG, namely 10B‐ and 15B‐MBG (5.8 and 6.5 mol% of B2O3, respectively) are synthesized. Boron incorporation does not significantly influence the particle morphology. All synthesized particles exhibit a sphere‐like shape with a size ranging from 100 to 300 nm. 10B‐ and 15B‐MBG show large specific surface area (346 and 320 m² g−1, respectively) and pore volume. Both boron‐doped MBG exhibit remarkable in vitro bioactivity and noncytotoxicity. Boron incorporation is shown to reduce the inflammatory response linked to macrophages as indicated by downregulated expression of pro‐inflammatory genes. However, boron incorporation delays the osteogenic differentiation in osteoblasts as indicated by the downregulated expression of pro‐osteogenic genes. The results demonstrate the promising potential of using boron‐doped MBG to modulate inflammatory response for bone regeneration under inflammatory conditions, as shown in this study for the first time. [ABSTRACT FROM AUTHOR]

The goal of the present work was to investigate the relationship between in vivo healing and inflammatory response and in vitro cytokine expression by macrophages of a synthetic bone filler (25% hydroxylapatite-75% β-tricalcium phosphate) bearing a surface nanolayer of collagen. A clinically accepted, state-of-the-art xenograft material was used as a “negative control,” that is, as a material that provides the correct clinical response for the intended use. In vitro data show that both materials exert a very low stimulation of proinflammatory cytokines by macrophages, and this was confirmed by the very mild inflammatory response detected in in vivo tests of local response in a rabbit model. Also, in vitro findings suggest a different mechanism of healing for the test and the control material, with a higher regenerative activity for the synthetic, resorbable filler, as confirmed by in vivo observation and literature reports. Thus, the simple in vitro model adopted provides a reasonable forecast of in vivo results, suggesting that new product development can be guided by in vitro tuning of cell-materials interactions. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the effects of titanium implants functionalised with collagen type I (TiColl) on bone regeneration and osteointegration in a healthy and osteopenic rat animal model.Method: TiColl screws were implanted into the femoral condyles of healthy and osteopenic rats and compared with acid-etched titanium (Ti) screws. The osteointegration process was evaluated by a complementary approach combining microtomographic, histological, histomorphometric and biomechanical investigations at four and 12 weeks.Results: The TiColl screw also ensured a greater mechanical stability; the push-out values for TiColl screws increased from four to 12 weeks (+28 %). The energy necessary to detach the bone from the screw was significantly higher for TiColl-functionalised screws in comparison to Ti screws (+23 %) at 12 weeks. Histomorphometric investigation revealed that total bone-to-implant contact was higher in TiColl screws in comparison to Ti screws (P < 0.05) and at epiphyseal level, increased bone-to-implant contact was found with TiColl screws in comparison to Ti screws (P < 0.05) in an ovariectomy (OVX) condition. A significant increase in the measured total bone ingrowth from four to 12 weeks was detected for both materials, but more significant for the TiColl material (P < 0.0005). Finally, bone ingrowth in the TiColl group was significantly higher (P < 0.005) in comparison to that of Ti screws in the SHAM condition at metaphyseal level at 12 weeks.Conclusion: The present results showed that TiColl is effective in promoting implant osteointegration even in compromised bone. [ABSTRACT FROM AUTHOR]

Abstract: Bone integration of orthopaedic or dental implants and regeneration of damaged bone at the surgical site are still unresolved problems in prosthetic surgery. For this reason, biomimetic surfaces (i.e. both inorganic and biological bioactive surfaces) represent a challenge for bone implantation. In this research work a hydrolase enzyme (alkaline phosphatase) was covalently grafted to inorganic bioactive glass and glass ceramic surfaces, in order to impart biological bioactivity. The functionalized samples were analysed by means of X-ray photoelectron spectroscopy in order to verify enzyme presence on the surface. Enzyme activity was measured by means of UV–visual spectroscopy after reaction with the natural substrate. Scanning electron microscopy–energy-dispersive spectroscopy observations allowed monitoring of the morphological and chemical modification of the materials during the different steps of functionalization. In vitro inorganic bioactivity was investigated by soaking samples in simulated body fluid. Enzymatic activity of the samples was tested and compared before and after soaking. Enzymatic activity of the solution was monitored at different experimental times. This study demonstrates that alkaline phosphatase could be successfully grafted onto different bioactive surfaces while maintaining its activity. Presence of the enzyme in vitro enhances the inorganic bioactivity of the materials tested. [Copyright &y& Elsevier]

Oral diseases and periodontitis in particular are a major health burden worldwide, because of their association with various systemic diseases and with conditions such as peri-implantitis. Attempts have been made over the years to reverse bone loss due to the host disproportionate inflammatory response and to prevent failure of dental implants. To this end, the use of biomaterials functionalized with molecules characterized by anti-inflammatory and antioxidant properties could represent a new frontier for regenerating functional periodontal tissues. In this study, a new ceramic granulated biomaterial, named Synergoss Red (SR), functionalized with a polyphenolic mixture extracted from pomace of the Croatina grape variety, is introduced. Following a preliminary in-depth characterization of the extract by HPLC analysis and of the biomaterial surface and composition, we performed evaluations of cytocompatibility and a biological response through in vitro assays. The anti-inflammatory and antioxidant properties of the identified phenolic molecules contained in SR were shown to downregulate inflammation in macrophages, to stimulate in osteoblast-like cells the expression of genes involved in deposition of the early bone matrix, and to mitigate bone remodeling by decreasing the RANKL/OPG ratio. Thanks to its cytocompatibility and assorted beneficial effects on bone regeneration, SR could be considered an innovative regenerative approach in periodontal therapy. [ABSTRACT FROM AUTHOR]

Over the recent years, mesoporous bioactive glasses (MBGs) gained interest as bone regeneration systems, due to their excellent bioactivity and ability to release therapeutic molecules. In order to improve the bone regeneration ability of MBGs, the incorporation of Sr2+ ions, due to its recognized pro-osteogenenic potential, represents a very promising strategy. In this study, MBGs based on the SiO2–CaO system and containing different percentages (2 and 4 mol %) of strontium were prepared by two synthesis methods, in the form of microspheres and nanoparticles. Sr-containing MBGs were characterized by FE-SEM, XRD and N2 adsorption/desorption analysis. The in vitro bioactivity in SBF resulted excellent. The assessment of fibroblast cell (line L929) viability showed that Sr-containing MBGs were biocompatible both in form of micro- and nanoparticles. The osteogenic response of osteoblast-like SAOS-2 cells was investigated by analysing the expression of GAPDH, COL1a1, RANKL, SPARC, OPG and ALPL genes, as cell differentiation markers. The results indicate that the incorporation of Sr into MBG is beneficial for bone regeneration as promotes a pro-osteogenic effect, paving the way to the design of advanced devices enabled by these nanocarriers also in combination with drug release, for the treatment of bone pathologies, particularly in patients with osteoporosis. [ABSTRACT FROM AUTHOR]