Search

Arthroplasty is generally used to treat advanced osteoarthritis or other degenerative joint diseases. However, it can also be considered in younger patients with severe joint damage that seriously limits their function and quality of life. Young patients are at risk of aseptic mobilization and bone resorption due to the uneven distribution of stress on the contact surface between the prosthesis and the femur that generates the stress-shielding phenomenon. To overcome this occurrence, it is necessary to use biocompatible materials with a stiffness that is similar to bone. Composite hip prostheses, consisting of continuous fiber-reinforced polymers, play a progressively key role in the development of prosthetic devices. Composite materials can be designed more carefully than monolithic stems (single-phase materials such as metals), allowing for the development of more effective tissue substitutes. Our purpose of this review was to analyze the state of the art in the use of carbon femoral prostheses. In particular, the major mechanical properties of reinforcement (fiber) and matrix were outlined with their applications in the prosthetic field. [ABSTRACT FROM AUTHOR]

The issue of dental implant placement relative to the alveolar crest, whether in supracrestal, equicrestal, or subcrestal positions, remains highly controversial, leading to conflicting data in various studies. Three-dimensional (3D) Finite Element Analysis (FEA) can offer insights into the biomechanical aspects of dental implants and the surrounding bone. A 3D model of the jaw was generated using computed tomography (CT) scans, considering a cortical thickness of 1.5 mm. Subsequently, Morse cone implant–abutment connection implants were virtually positioned at the model's center, at equicrestal (0 mm) and subcrestal levels (−1 mm and −2 mm). The findings indicated the highest stress within the cortical bone around the equicrestally placed implant, the lowest stress in the −2 mm subcrestally placed implant, and intermediate stresses in the −1 mm subcrestally placed implant. In terms of clinical relevance, this study suggested that subcrestal placement of a Morse cone implant–abutment connection (ranging between −1 and −2 mm) could be recommended to reduce peri-implant bone resorption and achieve longer-term implant success. [ABSTRACT FROM AUTHOR]

Extreme atrophy of the maxilla still poses challenges for clinicians. Some of the techniques used to address this issue can be complex, risky, expensive, and time consuming, often requiring skilled surgeons. While many commonly used techniques have achieved very high success rates, complications may arise in certain cases. In this context, the premaxillary device (PD) technique offers a simpler approach to reconstruct severely atrophic maxillae, aiming to avoid more complicated and risky surgical procedures. Finite element analysis (FEA) enables the evaluation of different aspects of dental implant biomechanics. Our results demonstrated that using a PD allows for an optimal distribution of stresses on the basal bone, avoiding tension peaks that can lead to bone resorption or implant failure. ANSYS® was used to perform localized finite element analysis (FEA), enabling a more precise examination of the peri-crestal area and the PD through an accurate mesh element reconstruction, which facilitated the mathematical solution of FEA. The most favorable biomechanical behavior was observed for materials such as titanium alloys, which helped to reduce stress levels on bone, implants, screws, and abutments. Additionally, stress values remained within the limits of basal bone and titanium alloy strengths. In conclusion, from a biomechanical point of view, PDs appear to be viable alternatives for rehabilitating severe atrophic maxillae. [ABSTRACT FROM AUTHOR]

Arthroplasty is commonly performed to treat advanced osteoarthritis or other degenerative joint conditions; however, it can also be considered for young patients with severe joint damage that significantly limits their functionality and quality of life. Young patients are still at risk of aseptic mobilization and bone resorption due to the phenomenon of stress shielding that causes an uneven distribution of tensions along the femoral contact surface prosthesis. This phenomenon can be limited by choosing the material of the prosthesis appropriately or by varying its stiffness, making sure that its mechanical behavior simulates that of the femur as much as possible. The aim of this study is to evaluate the mechanical strength of a prosthesis optimized both in shape and material and compare the results with a standard titanium prosthesis. Methods: Through three-dimensional modeling and the use of finite element method (FEM) software such as ANSYS, the mechanical behavior of traditional prosthesis and prosthesis optimized topologically respecting the ASTM F2996-13 standard. Results: With topological optimization, there is a stress reduction from 987 MPa to 810 MPa with a mass reduction of 30%. When carbon fiber is used, it is possible to further reduce stress to 509 MPa. Conclusions: The reduction in stress on the femoral stem allows an optimal distribution of the load on the cortical bone, thus decreasing the problem of stress shielding. [ABSTRACT FROM AUTHOR]