Search

Mental workload can be monitored in real time, which helps us improve work efficiency by maintaining an appropriate workload level. Based on previous studies, we have known that features, such as band power and brain connectivity, can be utilized to classify the levels of mental workload. As band power and brain connectivity represent different but complementary information related to mental workload, it is helpful to integrate them together for workload classification. Although deep learning models have been utilized for workload classification based on EEG, the classification performance is not satisfactory. This is because the current models cannot well tackle variances in the features extracted from non-stationary EEG. In order to address this problem, we, in this study, proposed a novel deep learning model, called latent space coding capsule network (LSCCN). The features of band power and brain connectivity were fused and then modelled in a latent space. The subsequent convolutional and capsule modules were used for workload classification. The proposed LSCCN was compared to the state-of-the-art methods. The results demonstrated that the proposed LSCCN was superior to the compared methods. LSCCN achieved a higher testing accuracy with a relatively smaller standard deviation, indicating a more reliable classification across participants. In addition, we explored the distribution of the features and found that top discriminative features were localized in the frontal, parietal, and occipital regions. This study not only provides a novel deep learning model but also informs further studies in workload classification and promotes practical usage of workload monitoring.

Background: Due to the redundant information contained in multichannel electroencephalogram (EEG) signals, the classification accuracy of brain-computer interface (BCI) systems may deteriorate to a large extent. Channel selection methods can help to remove task-independent electroencephalogram (EEG) signals and hence improve the performance of BCI systems. However, in different frequency bands, brain areas associated with motor imagery are not exactly the same, which will result in the inability of traditional channel selection methods to extract effective EEG features., New Method: To address the above problem, this paper proposes a novel method based on common spatial pattern- (CSP-) rank channel selection for multifrequency band EEG (CSP-R-MF). It combines the multiband signal decomposition filtering and the CSP-rank channel selection methods to select significant channels, and then linear discriminant analysis (LDA) was used to calculate the classification accuracy., Results: The results showed that our proposed CSP-R-MF method could significantly improve the average classification accuracy compared with the CSP-rank channel selection method.

At cocktail parties, our brains often simultaneously receive visual and auditory information. Although the cocktail party problem has been widely investigated under auditory-only settings, the effects of audiovisual inputs have not. This study explored the effects of audiovisual inputs in a simulated cocktail party. In our fMRI experiment, each congruent audiovisual stimulus was a synthesis of 2 facial movie clips, each of which could be classified into 1 of 2 emotion categories (crying and laughing). Visual-only (faces) and auditory-only stimuli (voices) were created by extracting the visual and auditory contents from the synthesized audiovisual stimuli. Subjects were instructed to selectively attend to 1 of the 2 objects contained in each stimulus and to judge its emotion category in the visual-only, auditory-only, and audiovisual conditions. The neural representations of the emotion features were assessed by calculating decoding accuracy and brain pattern-related reproducibility index based on the fMRI data. We compared the audiovisual condition with the visual-only and auditory-only conditions and found that audiovisual inputs enhanced the neural representations of emotion features of the attended objects instead of the unattended objects. This enhancement might partially explain the benefits of audiovisual inputs for the brain to solve the cocktail party problem.

Background: Common spatial pattern (CSP) has been most popularly applied to motor-imagery (MI) feature extraction for classification in brain-computer interface (BCI) application. Successful application of CSP depends on the filter band selection to a large degree. However, the most proper band is typically subject-specific and can hardly be determined manually., New Method: This study proposes a sparse filter band common spatial pattern (SFBCSP) for optimizing the spatial patterns. SFBCSP estimates CSP features on multiple signals that are filtered from raw EEG data at a set of overlapping bands. The filter bands that result in significant CSP features are then selected in a supervised way by exploiting sparse regression. A support vector machine (SVM) is implemented on the selected features for MI classification., Results: Two public EEG datasets (BCI Competition III dataset IVa and BCI Competition IV IIb) are used to validate the proposed SFBCSP method. Experimental results demonstrate that SFBCSP help improve the classification performance of MI., Comparison With Existing Methods: The optimized spatial patterns by SFBCSP give overall better MI classification accuracy in comparison with several competing methods., Conclusions: The proposed SFBCSP is a potential method for improving the performance of MI-based BCI., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Goal: Motor imagery-related mu/beta rhythms, which can be voluntarily modulated by subjects, have been widely used in EEG-based brain computer interfaces (BCIs). Moreover, it has been suggested that motor imagery-specific EEG differences can be enhanced by feedback training. However, the differences observed in the EEGs of naive subjects are typically not sufficient to provide reliable EEG control and thus result in unintended feedback. Such feedback can frustrate subjects and impede training. In this study, a hybrid BCI paradigm combining motor imagery and steady-state visually evoked potentials (SSVEPs) has been proposed to provide effective continuous feedback for motor imagery training., Methods: During the initial training sessions, subjects must focus on flickering buttons to evoke SSVEPs as they perform motor imagery tasks. The output/feedback of the hybrid BCI is based on hybrid features consisting of motor imagery- and SSVEP-related brain signals. In this context, the SSVEP plays a more important role than motor imagery in generating feedback. As the training progresses, the subjects can gradually decrease their visual attention to the flickering buttons, provided that the feedback is still effective. In this case, the feedback is mainly based on motor imagery., Results: Our experimental results demonstrate that subjects generate distinguishable brain patterns of hand motor imagery after only five training sessions lasting approximately 1.5 h each., Conclusion: The proposed hybrid feedback paradigm can be used to enhance motor imagery training., Significance: This hybrid BCI system with feedback can effectively identify the intentions of the subjects.

Background: Canonical correlation analysis (CCA) has been successfully applied to steady-state visual evoked potential (SSVEP) recognition for brain-computer interface (BCI) application. Although the CCA method outperforms the traditional power spectral density analysis through multi-channel detection, it requires additionally pre-constructed reference signals of sine-cosine waves. It is likely to encounter overfitting in using a short time window since the reference signals include no features from training data., New Method: We consider that a group of electroencephalogram (EEG) data trials recorded at a certain stimulus frequency on a same subject should share some common features that may bear the real SSVEP characteristics. This study therefore proposes a common feature analysis (CFA)-based method to exploit the latent common features as natural reference signals in using correlation analysis for SSVEP recognition., Results: Good performance of the CFA method for SSVEP recognition is validated with EEG data recorded from ten healthy subjects, in contrast to CCA and a multiway extension of CCA (MCCA)., Comparison With Existing Methods: Experimental results indicate that the CFA method significantly outperformed the CCA and the MCCA methods for SSVEP recognition in using a short time window (i.e., less than 1s)., Conclusions: The superiority of the proposed CFA method suggests it is promising for the development of a real-time SSVEP-based BCI., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Objective: Recently, significant advances have been made in the early diagnosis of Alzheimer's disease (AD) from electroencephalography (EEG). However, choosing suitable measures is a challenging task. Among other measures, frequency relative power (RP) and loss of complexity have been used with promising results. In the present study we investigate the early diagnosis of AD using synchrony measures and frequency RP on EEG signals, examining the changes found in different frequency ranges., Approach: We first explore the use of a single feature for computing the classification rate (CR), looking for the best frequency range. Then, we present a multiple feature classification system that outperforms all previous results using a feature selection strategy. These two approaches are tested in two different databases, one containing mild cognitive impairment (MCI) and healthy subjects (patients age: 71.9 ± 10.2, healthy subjects age: 71.7 ± 8.3), and the other containing Mild AD and healthy subjects (patients age: 77.6 ± 10.0; healthy subjects age: 69.4 ± 11.5)., Main Results: Using a single feature to compute CRs we achieve a performance of 78.33% for the MCI data set and of 97.56% for Mild AD. Results are clearly improved using the multiple feature classification, where a CR of 95% is found for the MCI data set using 11 features, and 100% for the Mild AD data set using four features., Significance: The new features selection method described in this work may be a reliable tool that could help to design a realistic system that does not require prior knowledge of a patient's status. With that aim, we explore the standardization of features for MCI and Mild AD data sets with promising results.

Background: It was proved that the human face stimulus were superior to the flash only stimulus in BCI system. However, human face stimulus may lead to copyright infringement problems and was hard to be edited according to the requirement of the BCI study. Recently, it was reported that facial expression changes could be done by changing a curve in a dummy face which could obtain good performance when it was applied to visual-based P300 BCI systems., New Method: In this paper, four different paradigms were presented, which were called dummy face pattern, human face pattern, inverted dummy face pattern and inverted human face pattern, to evaluate the performance of the dummy faces stimuli compared with the human faces stimuli., Comparison With Existing Method(s): The key point that determined the value of dummy faces in BCI systems were whether dummy faces stimuli could obtain as good performance as human faces stimuli. Online and offline results of four different paradigms would have been obtained and comparatively analyzed., Results: Online and offline results showed that there was no significant difference among dummy faces and human faces in ERPs, classification accuracy and information transfer rate when they were applied in BCI systems., Conclusions: Dummy faces stimuli could evoke large ERPs and obtain as high classification accuracy and information transfer rate as the human faces stimuli. Since dummy faces were easy to be edited and had no copyright infringement problems, it would be a good choice for optimizing the stimuli of BCI systems., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Despite recent advances, early diagnosis of Alzheimer's disease (AD) from electroencephalography (EEG) remains a difficult task. In this paper, we offer an added measure through which such early diagnoses can potentially be improved. One feature that has been used for discriminative classification is changes in EEG synchrony. So far, only the decrease of synchrony in the higher frequencies has been deeply analyzed. In this paper, we investigate the increase of synchrony found in narrow frequency ranges within the θ band. This particular increase of synchrony is used with the well-known decrease of synchrony in the α band to enhance detectable differences between AD patients and healthy subjects. We propose a new synchrony ratio that maximizes the differences between two populations. The ratio is tested using two different data sets, one of them containing mild cognitive impairment patients and healthy subjects, and another one, containing mild AD patients and healthy subjects. The results presented in this paper show that classification rate is improved, and the statistical difference between AD patients and healthy subjects is increased using the proposed ratio.

Canonical correlation analysis (CCA) has been one of the most popular methods for frequency recognition in steady-state visual evoked potential (SSVEP)-based brain-computer interfaces (BCIs). Despite its efficiency, a potential problem is that using pre-constructed sine-cosine waves as the required reference signals in the CCA method often does not result in the optimal recognition accuracy due to their lack of features from the real electro-encephalo-gram (EEG) data. To address this problem, this study proposes a novel method based on multiset canonical correlation analysis (MsetCCA) to optimize the reference signals used in the CCA method for SSVEP frequency recognition. The MsetCCA method learns multiple linear transforms that implement joint spatial filtering to maximize the overall correlation among canonical variates, and hence extracts SSVEP common features from multiple sets of EEG data recorded at the same stimulus frequency. The optimized reference signals are formed by combination of the common features and completely based on training data. Experimental study with EEG data from 10 healthy subjects demonstrates that the MsetCCA method improves the recognition accuracy of SSVEP frequency in comparison with the CCA method and other two competing methods (multiway CCA (MwayCCA) and phase constrained CCA (PCCA)), especially for a small number of channels and a short time window length. The superiority indicates that the proposed MsetCCA method is a new promising candidate for frequency recognition in SSVEP-based BCIs.

Two main issues for event-related potential (ERP) classification in brain-computer interface (BCI) application are curse-of-dimensionality and bias-variance tradeoff, which may deteriorate classification performance, especially with insufficient training samples resulted from limited calibration time. This study introduces an aggregation of sparse linear discriminant analyses (ASLDA) to overcome these problems. In the ASLDA, multiple sparse discriminant vectors are learned from differently l1-regularized least-squares regressions by exploiting the equivalence between LDA and least-squares regression, and are subsequently aggregated to form an ensemble classifier, which could not only implement automatic feature selection for dimensionality reduction to alleviate curse-of-dimensionality, but also decrease the variance to improve generalization capacity for new test samples. Extensive investigation and comparison are carried out among the ASLDA, the ordinary LDA and other competing ERP classification algorithms, based on different three ERP datasets. Experimental results indicate that the ASLDA yields better overall performance for single-trial ERP classification when insufficient training samples are available. This suggests the proposed ASLDA is promising for ERP classification in small sample size scenario to improve the practicability of BCI.

Non-negative Canonical Polyadic decomposition (NCPD) and non-negative Tucker decomposition (NTD) were compared for extracting the multi-domain feature of visual mismatch negativity (vMMN), a small event-related potential (ERP), for the cognitive research. Since signal-to-noise ratio in vMMN is low, NTD outperformed NCPD. Moreover, we proposed an approach to select the multi-domain feature of an ERP among all extracted features and discussed determination of numbers of extracted components in NCPD and NTD regarding the ERP context.

Linear discriminant analysis (LDA) has been widely adopted to classify event-related potential (ERP) in brain-computer interface (BCI). Good classification performance of the ERP-based BCI usually requires sufficient data recordings for effective training of the LDA classifier, and hence a long system calibration time which however may depress the system practicability and cause the users resistance to the BCI system. In this study, we introduce a spatial-temporal discriminant analysis (STDA) to ERP classification. As a multiway extension of the LDA, the STDA method tries to maximize the discriminant information between target and nontarget classes through finding two projection matrices from spatial and temporal dimensions collaboratively, which reduces effectively the feature dimensionality in the discriminant analysis, and hence decreases significantly the number of required training samples. The proposed STDA method was validated with dataset II of the BCI Competition III and dataset recorded from our own experiments, and compared to the state-of-the-art algorithms for ERP classification. Online experiments were additionally implemented for the validation. The superior classification performance in using few training samples shows that the STDA is effective to reduce the system calibration time and improve the classification accuracy, thereby enhancing the practicability of ERP-based BCI.

Event-related potential (ERP)-based brain-computer interfacing (BCI) is an effective method of basic communication. However, collecting calibration data, and classifier training, detracts from the amount of time allocated for online communication. Decreasing calibration time can reduce preparation time thereby allowing for additional online use, potentially lower fatigue, and improved performance. Previous studies, using generic online training models which avoid offline calibration, afford more time for online spelling. Such studies have not examined the direct effects of the model on individual performance, and the training sequence exceeded the time reported here. The first goal of this work is to survey whether one generic model works for all subjects and the second goal is to show the performance of a generic model using an online training strategy when participants could use the generic model. The generic model was derived from 10 participant's data. An additional 11 participants were recruited for the current study. Seven of the participants were able to use the generic model during online training. Moreover, the generic model performed as well as models obtained from participant specific offline data with a mean training time of less than 2 min. However, four of the participants could not use this generic model, which shows that one generic mode is not generic for all subjects. More research on ERPs of subjects with different characteristics should be done, which would be helpful to build generic models for subject groups. This result shows a potential valuable direction for improving the BCI system., (Copyright © 2012 Elsevier B.V. All rights reserved.)

This study introduces a novel brain-computer interface (BCI) based on an oddball paradigm using stimuli of facial images with loss of configural face information (e.g., inversion of face). To the best of our knowledge, till now the configural processing of human faces has not been applied to BCI but widely studied in cognitive neuroscience research. Our experiments confirm that the face-sensitive event-related potential (ERP) components N170 and vertex positive potential (VPP) have reflected early structural encoding of faces and can be modulated by the configural processing of faces. With the proposed novel paradigm, we investigate the effects of ERP components N170, VPP and P300 on target detection for BCI. An eight-class BCI platform is developed to analyze ERPs and evaluate the target detection performance using linear discriminant analysis without complicated feature extraction processing. The online classification accuracy of 88.7% and information transfer rate of 38.7 bits min(-1) using stimuli of inverted faces with only single trial suggest that the proposed paradigm based on the configural processing of faces is very promising for visual stimuli-driven BCI applications.

Several clinical studies have reported that EEG synchrony is affected by Alzheimer's disease (AD). In this paper a frequency band analysis of AD EEG signals is presented, with the aim of improving the diagnosis of AD using EEG signals. In this paper, multiple synchrony measures are assessed through statistical tests (Mann-Whitney U test), including correlation, phase synchrony and Granger causality measures. Moreover, linear discriminant analysis (LDA) is conducted with those synchrony measures as features. For the data set at hand, the frequency range (5-6 Hz) yields the best accuracy for diagnosing AD, which lies within the classical theta band (4-8 Hz). The corresponding classification error is 4.88% for directed transfer function (DTF) Granger causality measure. Interestingly, results show that EEG of AD patients is more synchronous than in healthy subjects within the optimized range 5-6 Hz, which is in sharp contrast with the loss of synchrony in AD EEG reported in many earlier studies. This new finding may provide new insights about the neurophysiology of AD. Additional testing on larger AD datasets is required to verify the effectiveness of the proposed approach.

Steady-state visual evoked potentials (SSVEPs) can be used successfully for brain-computer interfaces (BCI) with multiple commands and high information transfer rates. In this study, we investigated a novel affective SSVEP paradigm using flickering video clips of emotional human faces, and evaluated their performance in an 8-command BCI controlling a robotic arm in near real-time. Single-trial affective SSVEP responses, estimated using a new phase-locking value variability and a wavelet energy variability measures, were significantly enhanced compared with blurred-face flicker and standard checkerboards. For multicommand SSVEP-based BCI, affective face-flicker boosted up the information transfer rates from 50 to 64 bits/min, while reducing user fatigue and enhancing visual attention and reliability. In the 5-12 Hz flicker frequency range, the strongest affective SSVEP responses were obtained at 10 Hz. These findings suggest new directions for SSVEP-based neural applications, including affective BCI and enhanced steady-state clinical probes.

Many clinical studies have shown that electroencephalograms (EEG) of Alzheimer patients (AD) often have an abnormal power spectrum. In this paper a frequency band analysis of AD EEG signals is presented, with the aim of improving the diagnosis of AD from EEG signals. Relative power in different EEG frequency bands is used as features to distinguish between AD patients and healthy control subjects. Many different frequency bands between 4 and 30 Hz are systematically tested, besides the traditional frequency bands, e.g., theta band (4-8 Hz). The discriminative power of the resulting spectral features is assessed through statistical tests (Mann-Whitney U test). Moreover, linear discriminant analysis is conducted with those spectral features. The optimized frequency ranges (4-7 Hz, 8-15 Hz, 19-24 Hz) yield substantially better classification performance than the traditional frequency bands (4-8 Hz, 8-12 Hz, 12-30 Hz); the frequency band 4-7 Hz is the optimal frequency range for detecting AD, which is similar to the classical theta band. The frequency bands were also optimized as features through leave-one-out crossvalidation, resulting in error-free classification. The optimized frequency bands may improve existing EEG based diagnostic tools for AD. Additional testing on larger AD datasets is required to verify the effectiveness of the proposed approach.

An auditory modality brain computer interface (BCI) is a novel and interesting paradigm in neurotechnology applications. The paper presents a concept of auditory steady state responses (ASSR) utilization for the novel BCI paradigm. Two EEG feature extraction approaches based on a bandpass filtering and an AR spectrum estimation are tested together with two classification schemes in order to validate the proposed auditory BCI paradigm. The resulting good classification scores of users intentional choices, of attending or not to the presented stimuli, support the hypothesis of the ASSR stimuli validity for a solid BCI paradigm.

This study pursues the optimization of the brain responses to small reversing patterns in a Steady-State Visual Evoked Potentials (SSVEP) paradigm, which could be used to maximize the efficiency of applications such as Brain-Computer Interfaces (BCI). We investigated the SSVEP frequency response for 32 frequencies (5-84 Hz), and the time dynamics of the brain response at 8, 14 and 28 Hz, to aid the definition of the optimal neurophysiological parameters and to outline the onset-delay and other limitations of SSVEP stimuli in applications such as our previously described four-command BCI system. Our results showed that the 5.6-15.3 Hz pattern reversal stimulation evoked the strongest responses, peaking at 12 Hz, and exhibiting weaker local maxima at 28 and 42 Hz. After stimulation onset, the long-term SSVEP response was highly non-stationary and the dynamics, including the first peak, was frequency-dependent. The evaluation of the performance of a frequency-optimized eight-command BCI system with dynamic neurofeedback showed a mean success rate of 98%, and a time delay of 3.4s. Robust BCI performance was achieved by all subjects even when using numerous small patterns clustered very close to each other and moving rapidly in 2D space. These results emphasize the need for SSVEP applications to optimize not only the analysis algorithms but also the stimuli in order to maximize the brain responses they rely on., ((c) 2009 Elsevier Ireland Ltd. All rights reserved.)

In this paper we present a method for continuous EEG classification, where we employ nonnegative tensor factorization (NTF) to determine discriminative spectral features and use the Viterbi algorithm to continuously classify multiple mental tasks. This is an extension of our previous work on the use of nonnegative matrix factorization (NMF) for EEG classification. Numerical experiments with two data sets in BCI competition, confirm the useful behavior of the method for continuous EEG classification.

In this paper, we use a two-stage sparse factorization approach for blindly estimating the channel parameters and then estimating source components for electroencephalogram (EEG) signals. EEG signals are assumed to be linear mixtures of source components, artifacts, etc. Therefore, a raw EEG data matrix can be factored into the product of two matrices, one of which represents the mixing matrix and the other the source component matrix. Furthermore, the components are sparse in the time-frequency domain, i.e., the factorization is a sparse factorization in the time frequency domain. It is a challenging task to estimate the mixing matrix. Our extensive analysis and computational results, which were based on many sets of EEG data, not only provide firm evidences supporting the above assumption, but also prompt us to propose a new algorithm for estimating the mixing matrix. After the mixing matrix is estimated, the source components are estimated in the time frequency domain using a linear programming method. In an example of the potential applications of our approach, we analyzed the EEG data that was obtained from a modified Sternberg memory experiment. Two almost uncorrelated components obtained by applying the sparse factorization method were selected for phase synchronization analysis. Several interesting findings were obtained, especially that memory-related synchronization and desynchronization appear in the alpha band, and that the strength of alpha band synchronization is related to memory performance.

Electroencephalogram (EEG) related to fast eye movement (saccade), has been the subject of application oriented research by our group toward developing a brain-computer interface (BCI). Our goal is to develop novel BCI based on eye movements system employing EEG signals online. Most of the analysis of the saccade-related EEG data has been performed using ensemble averaging approaches. However, ensemble averaging is not suitable for BCI. In order to process raw EEG data in real time, we performed saccade-related EEG experiments and processed data by using the non-conventional fast ICA with reference signal (FICAR). The FICAR algorithm can extract desired independent components (IC) which have strong correlation against a reference signal. Visually guided saccade tasks and auditory guided saccade tasks were performed and the EEG signal generated in the saccade was recorded. The EEG processing was performed in three stages: PCA preprocessing and noise reduction, extraction of the desired IC using Wiener filter with reference signal, and post-processing using higher order statistics fast ICA based on maximization of kurtosis. Form the experimental results and analysis we found that using FICAR it is possible to extract form raw EEG data the saccade-related ICs and to predict saccade in advance by about 10 [ms] before real movements of eyes occurs. For single trail EEG data we have successfully extracted the desire ICs with recognition rate about 70%. In next steps, saccade-related EEG signals and saccade-related ICs in visually and auditory guided saccade task are compared in the point of the latency between starting time of a saccade and time when a saccade-related EEG signal or an IC has maximum value and in the point of the peak scale where a saccade-related EEG signal or an IC has maximum value. As results, peak time when saccade-related ICs have maximum amplitude is earlier than peak time when saccade-related EEG signals have maximum amplitude. This is very important advantage for developing our BCI. However, S/N ratio in being processed by FICAR is not improved comparing S/N ratio in being processed by ensemble averaging.

Eye movements and blinks may produce unusual voltage changes that propagates from the eyeball through the head as volume conductor up to the scalp electrodes, generating severe electroencephalographic artifacts. Several methods are now available to correct the distortion induced by these events on the EEG, having different advantages and drawbacks. The main focus of this work is to quantify the performance of the removal of EOG artifact due to the application of the independent component analysis (ICA) methodology. The precise quantification of the effects of artifact removal by ICA is possible by using a simulation setup, with a realistic head model, that it is able to mimic the occurrence of an eye blink. The electrical activity generated by the simulated eyeblink were propagated through the realistic head model and superimposed to a clean segment of EEG. Then, artifact removal was performed by using the ICA approach. Ocular artifact removal was evaluated in different operative conditions, characterized by different signal to noise ratio and number of electrodes. The error measures used were the relative error and the correlation coefficient between the clear, original EEG segment and those obtained after the application of the ICA procedure.

Background: motor imagery (MI) is a mental representation of motor behavior. The MI-based brain computer interfaces (BCIs) can provide communication for the physically impaired. The performance of MI-based BCI mainly depends on the subject’s ability to self-modulate electroencephalogram signals. Proper training can help naive subjects learn to modulate brain activity proficiently. However, training subjects typically involve abstract motor tasks and are time-consuming. Methods: to improve the performance of naive subjects during motor imagery, a novel paradigm was presented that would guide naive subjects to modulate brain activity effectively. In this new paradigm, pictures of the left or right hand were used as cues for subjects to finish the motor imagery task. Fourteen healthy subjects (11 male, aged 22–25 years, and mean 23.6±1.16) participated in this study. The task was to imagine writing a Chinese character. Specifically, subjects could imagine hand movements corresponding to the sequence of writing strokes in the Chinese character. This paradigm was meant to find an effective and familiar action for most Chinese people, to provide them with a specific, extensively practiced task and help them modulate brain activity. Results: results showed that the writing task paradigm yielded significantly better performance than the traditional arrow paradigm (p < 0.001). Questionnaire replies indicated that most subjects thought that the new paradigm was easier. Conclusion: the proposed new motor imagery paradigm could guide subjects to help them modulate brain activity effectively. Results showed that there were significant improvements using new paradigm, both in classification accuracy and usability. [ABSTRACT FROM AUTHOR]

The paper reports our research aiming at utilization of human interactive communication modeling principles in application to a novel interaction paradigm designed for brain-computer/machine-interfacing (BCI/BMI) technologies as well as for socially aware intelligent environments or communication support systems. Automatic procedures for human affective responses or emotional states estimation are still a hot topic of contemporary research. We propose to utilize human brain and bodily physiological responses for affective/emotional as well as communicative interactivity estimation, which potentially could be used in the future for human-machine/environment interaction design. As a test platform for such an intelligent human-machine communication application, an emotional stimuli paradigm was chosen to evaluate brain responses to various affective stimuli in an emotional empathy mode. Videos with moving faces expressing various emotional displays as well as speech stimuli with similarly emotionally articulated sentences are presented to the subjects in order to further analyze different affective responses. From information processing point of view, several challenges with multimodal signal conditioning and stimuli dynamic response extraction in time frequency domain are addressed. Emotions play an important role in human daily life and human-to-human communication. This is why involvement of affective stimuli principles to human-machine communication or machine-mediated communication with utilization of multichannel neurophysiological and periphery physiological signals monitoring techniques, allowing real-time subjective brain responses evaluation, is discussed. We present our preliminary results and discuss potential applications of brain/body affective responses estimation for future interactive/smart environments. [ABSTRACT FROM AUTHOR]

Human brains exhibit a possibility to control directly the intelligent computing applications in form of brain computer/machine interfacing (BCI/BMI) technologies. Neurophysiological signals and especially electroencephalogram (EEG) are the forms of brain electrical activity which can be easily captured and utilized for BCI/BMI applications. Those signals are unfortunately usually very highly contaminated by external noise caused by the presence of different devices in the environment creating electromagnetic interference. In this paper, we first decompose each of the recorded channels, in multichannel EEG recording environment, into intrinsic mode functions (IMF) which are a result of empirical mode decomposition (EMD) extended to multichannel analysis. We present novel and interesting results on human mental and cognitive states estimation based on analysis of the above-mentioned stimuli-related IMF components. The IMF components are further clustered for their spectral similarity in order to identify only those carrying responses to present stimuli to the subjects. The resulting targets only reconstruction allows us to identify when and to which stimuli intelligent application user is tuning at a time. [ABSTRACT FROM AUTHOR]

Background: oscillatory activity, which can be separated in background and oscillatory burst pattern activities, is supposed to be representative of local synchronies of neural assemblies. Oscillatory burst events should consequently play a specific functional role, distinct from background EEG activity -- especially for cognitive tasks (e.g. working memory tasks), binding mechanisms and perceptual dynamics (e.g. visual binding), or in clinical contexts (e.g. effects of brain disorders). However extracting oscillatory events in single trials, with a reliable and consistent method, is not a simple task. Results: in this work we propose a user-friendly stand-alone toolbox, which models in a reasonable time a bump time-frequency model from the wavelet representations of a set of signals. The software is provided with a Matlab toolbox which can compute wavelet representations before calling automatically the stand-alone application. Conclusion: The tool is publicly available as a freeware at the address: http:// www.bsp.brain.riken.jp/bumptoolbox/toolbox_home.html [ABSTRACT FROM AUTHOR]

Presents information on a study which used third-order correlations (TOC) in developing a filtering technique to reduce noise corrupting brain evoked potentials (EP). Background on EP; Simulation and experimental results; Conclusion.