Search

With the increasing demand for large signal bandwidth in communication systems, the complexity of the behavioral model of power amplifier (PA) will also increase. In this paper, a modified weighted magnitude‐selective model based on magnitude‐selective affine (MSA) function based model and weighted memory polynomial model is proposed to ensure low complexity and good modeling performance under broadband signal excitation. This model is constructed by using the power‐dependent weighted function instead of the sum of multiple MSA functions in MSA. It can not only be used to solve the nonlinearity of PA excited by large bandwidth signal but also reducing the model coefficients without affecting the modeling performance makes the digital predistortion of large bandwidth signals more simple and effective. In this paper, a 100 MHz broadband signal is used for simulation and experiment on a wideband PA. The results show that for the same performance the WMA model required approximately 80% less coefficients. [ABSTRACT FROM AUTHOR]

In this article, a novel method to design broadband linear power amplifier (BL‐PA) is presented. By adding the image parts for harmonics and intermodulation products (HIMPs), a suboptimal solution of efficiency and linearity in continuous frequencies can be achieved at a broadband to improve the efficiency and linearity performance of the BL‐PA. For verification, a BL‐PA operating 3.2‐3.8GHz is designed and the performances are assessed in multi modes. [ABSTRACT FROM AUTHOR]

In this paper, an extended Chebyshev function is proposed to adapt the matching condition of the power amplifier (PA) by introducing a new factor. A set of impedance functions can be directly calculated along with the variation of a new variable, and the first element extracted from the functions is distributed in a wide range. In addition, the impedance function whose first element is the closest to the output capacitance of the transistor can be easily read out and selected as the original matching network. The fundamental impedance of the selected function will be reached a good matching state, and the impedances out of band will be on the edge of Smith chart. To achieve better performances, the real frequency technique is applied to adjust the harmonic impedances preventing it from falling into the low-efficiency region. Two PAs with a relative bandwidth of 34% and 75% are implemented to validate the proposed approach. [ABSTRACT FROM PUBLISHER]

This paper presents a modified Doherty configuration with extended bandwidth. The narrow band feature of the conventional Doherty amplifier is discussed in the view of the broadband matching. To extend the bandwidth, the post-matching architecture is employed in the proposed design. Meanwhile, broadband low-order impedance inverters are adopted to replace the quarter-wavelength transmission lines. Low-pass filter topologies are used to realize both the post matching network and the impedance inverters. A modified Doherty Power amplifier was designed and fabricated based on commercial GaN HEMT devices to validate the broadband characteristics of this configuration. The 6-dB backoff efficiencies of 47%–57% are obtained from 1.7 to 2.6 GHz (41.9% fractional bandwidth) and the measured maximum output power ranges from 44.9 to 46.3 dBm in the designed band. In particular, more than 40% efficiencies are measured at 10-dB backoff throughout the operation band. [ABSTRACT FROM PUBLISHER]

A 0.4–2.3 GHz broadband power amplifier (PA) extended continuous class-F design technology is proposed in this paper. Traditional continuous class-F PA performs in high-efficiency only in one octave bandwidth. With the increasing development of wireless communication, the PA is in demand to cover the mainstream communication standards’ working frequencies from 0.4 GHz to 2.2 GHz. In order to achieve this objective, the bandwidths of class-F and continuous class-F PA are analysed and discussed by Fourier series. Also, two criteria, which could reduce the continuous class-F PA’s implementation complexity, are presented and explained to investigate the overlapping area of the transistor’s current and voltage waveforms. The proposed PA design technology is based on the continuous class-F design method and divides the bandwidth into two parts: the first part covers the bandwidth from 1.3 GHz to 2.3 GHz, where the impedances are designed by the continuous class-F method; the other part covers the bandwidth from 0.4 GHz to 1.3 GHz, where the impedance to guarantee PA to be in high-efficiency over this bandwidth is selected and controlled. The improved particle swarm optimisation is employed for realising the multi-impedances of output and input network. A PA based on a commercial 10 W GaN high electron mobility transistor is designed and fabricated to verify the proposed design method. The simulation and measurement results show that the proposed PA could deliver 40–76% power added efficiency and more than 11 dB power gain with more than 40 dBm output power over the bandwidth from 0.4–2.3 GHz. [ABSTRACT FROM PUBLISHER]

In this article, a method for design automation high-efficiency power amplifiers (PAs) based on an optimization-oriented is proposed. The advantages of using particle swarm optimization to design PAs in electronic design automatic tools are analyzed, and then, simulated annealing is combined to form simulated annealing particle swarm optimization (SA-PSO). In this article, the perfectly inelastic collision used in conventional PSO is replaced by the perfectly elastic collision to improve the searching ability through reducing kinetic energy consumption. A stepped fitness function is defined to avoid the performance pit at a single-frequency point, and the concept “missing and returning” is introduced to solve the nonconvergence problem in simulation. Based on the improved SA-PSO algorithm, a broadband 10 W and a triband 6-W PA are designed. The broadband 10-W PA achieves an average drain efficiency (DE) of 62.5% and an output power of 41.2 dBm in the 0.8–3-GHz frequency band, respectively; the triband 6-W PA achieves an average of 57.4%/47.9%/47.3% DE and 37.7-/38.3-/37.4 dBm output power in 3.35–3.55-/5.75–5.95-/7.65–7.95-GHz frequency bands, respectively, while the gains of most stopbands reach less than 0 dB. With digital predistortion technology, the adjacent channel power ratio (ACPR) can reach less than −45 dBc. [ABSTRACT FROM AUTHOR]