Search

A high-speed backlight system was adopted to investigate the evolution process of the inside-out-gas (IOG) effervescent atomizer and subsequent influence on spray morphology. The results show that bubble flow and annular flow are the most obvious flow patterns when the liquid flow rate is 20 g/s. During the transition from bubble to annular flow, slug flow occurred at gas–liquid mass ratio (GLR) of 3.2%. The annular flow was observed when the GLR further increased to 6.4%. In particular, when the mixing chamber is in a large bubble flow, an annular flow can still be formed at the orifice for the small exit diameter. For the annular flow, a relatively stable spray cone angle was observed. On the contrary, the slug flow has a greater oscillation for the spray cone angle. It was found that bubble flow in the orifice has little effect on atomization effect. For the spray cone angle, the oscillation in the slug flow is larger. Furthermore, the effects of GLR and liquid injection pressure drop are carefully considered in the empirical formula fitting compared to the widely used empirical formula. The empirical formula of the discharge coefficient of the effervescent atomizer is fitted, which provides fast data support for engineering applications. [ABSTRACT FROM AUTHOR]