Search

Developing BEPS models which predict energy usage to a high degree of accuracy can be extremely time consuming. As a result, assumptions are often made regarding the input data required. Making these assumptions without introducing a significant amount of uncertainty to the model can be difficult, and requires experience. Even so, rules of thumb from one geographic region are not automatically transferrable to other regions. This paper develops a methodology which can be used to determine useful guidelines for defining the most influential input data for an accurate BEPS model. Differential sensitivity analysis is carried out on parametric data gathered from five archetype dwelling models. The sensitivity analysis results are used in order to form a guideline minimum set of accurately defined input data. Although the guidelines formed apply specifically to Irish residential dwellings, the methodology and processes used in defining the guidelines is highly repeatable. The guideline minimum data set was applied to practical examples in order to be validated. Existing buildings were modelled, and only the parameters within the minimum data set are accurately defined. All building models predict annual energy usage to within 10% of actual measured data, with seasonal energy profiles well-matching. [ABSTRACT FROM AUTHOR]

The present paper introduces an iterative methodology to progressively reduce building simulation model complexity with the aim of identifying potential trade-offs between computational requirements (i.e., model complexity) and energy estimation accuracy. Different levels of model complexity are analysed, from commercial building energy simulation tools to low order calibrated thermal networks models. Experimental data from a residential building in Germany were collected and used to validate two detailed white-box models and a simplified white-box model. The validation process was performed in terms of internal temperature profiles and building thermal energy demand predictions. Synthetic profiles were generated from the validated models and used for calibrating high order models. A reduction (trimming) procedure was applied to reduce the model complexity using an energy performance criterion prior to model trimming. The proposed methodology has the advantage of keeping the physical structure of the original RC model, thus enabling the use of the trimmed lumped parameter building model for other applications. The analysis showed that it is possible to reduce the model complexity by half, while keeping the accuracy above 90% for the targeted building. [ABSTRACT FROM AUTHOR]

The paper is concerned with the development and evaluation of control algorithms for the implementation of demand response strategies in a smart-grid enabled all-electric residential building. The dwelling is equipped with a 12 kW heat pump, a 0.8 m 3 water storage tank, a 6 kW photovoltaic (PV) array, solar thermal collectors for domestic hot water heating and an electric vehicle. The building, located in Ireland, is fully instrumented. An EnergyPlus building simulation model of the dwelling was developed and calibrated using monitored data from the building. The developed model is used to assess the effectiveness of demand response strategies using different time-of-use electricity tariffs in conjunction with zone thermal control. A reduction in generation cost (−22.5%), electricity end-use expenditure (−4.9%) and carbon emission (−7.6%), were estimated when DR measures were implemented and compared with a baseline system. Furthermore, when the zone control features were enabled, the efficiency of the control improved significantly giving, an overall annual economic saving of 16.5% for the residential energy cost. The analysis also identified an annual reduction of consumer electricity consumption of up to 15.9%, lower carbon emissions of 27% and facilitated greater utilisation of electricity generated by grid-scale renewable resources, resulting in a reduction of generation costs for the utility of up to 45.3%. [ABSTRACT FROM AUTHOR]