Search

Thermo-hydraulic characteristics of supercritical CO 2 (SCO 2) flows in horizontal tubes with half-wall heat-flux conditions are investigated numerically, which is a common practice such as applications in solar parabolic trough collectors, while the heat transfer performance and the underlying mechanisms have not been fully understood. In heated flows, buoyancy acts to inhibit heat transfer when the top half of the tube wall is heated, however, when the bottom half of the tube wall is heated, this inhibition is alleviated, and the synergy between the temperature gradient and velocity fields improves thanks to the secondary flow in the near-wall region at the bottom wall. As a result, the heat transfer coefficient is ∼95% higher (on average) than in the case when the top half of the tube wall is heated. When the bottom half of the tube wall is cooled, buoyancy is expected to enhance heat transfer, while the synergy between the temperature gradient and velocity fields is supressed by the secondary flow in the near-wall region at the bottom of the tube. Conversely, when the top half of the tube wall is cooled, the buoyancy effect inhibits heat transfer, while the synergy between the temperature gradient and velocity fields is improved by the secondary flow in the near-wall region at the top of the tube, which eventually leads to an increase of ∼21% (on average) in the heat transfer coefficient relative to the case when the bottom half of the tube wall is cooled. Finally, the heat transfer discrepancy due to different heat flux conditions revealed in this study are employed in a heat exchanger model, indicating that the thermal performance of this device can be increased by ∼6% through an appropriate arrangement of the hot and cold flows without additional costs. • Thermal-hydraulic features of horizontal flows of supercritical CO 2 are investigated numerically. • Heat transfer coefficient is ∼21% higher when top half wall is cooled than bottom half. • Heat transfer coefficient is ∼95% higher when bottom half wall is heated than top half. • Heat transfer is affected by buoyancy and can be explained using the field synergy principle. • Optimisation of a heat exchanger can be realised by arranging flows without additional consumption. [ABSTRACT FROM AUTHOR]

• Vertical supercritical CO 2 flows at heating conditions are investigated numerically • HTC increases by ∼37% on average in downward flows relative to upward flows • Heat transfer is significantly deteriorated upstream of t pc in upward flows • Multiple wall temperature peaks appear at high heat-flux and low mass-flux conditions • Buoyancy suppresses turbulence and promotes gas-like film formation in upward flows The thermo-hydraulic characteristics of heated supercritical CO 2 (SCO 2) flows are investigated numerically in a vertical pipe from first- and second-law perspectives, and the influence of the flow direction, mass flux and heat flux (both distribution and average value) are evaluated. Two mass flux (254 kg/(m2∙s) and 400 kg/(m2∙s)) and three average heat flux (30 kW/m2, 50 kW/m2 and 70 kW/m2) conditions are simulated at an inlet temperature of 288 K and a pressure of 8.0 MPa (corresponding pseudo-critical temperature of 308 K) in a 4-mm diameter pipe. The simulation results reveal that the heat transfer is enhanced and the irreversibility is reduced in downward flows relative to flows without gravity, whereas the heat transfer deteriorates and the irreversibility is increased in upward flows. Both higher heat fluxes and lower mass fluxes also further hinder heat transfer in the upward flows, and multiple peaks are observed in the axial wall temperature profile. Moreover, it is found that the heat-flux distribution has a significant effect on the heat transfer performance of upward flows; the heat transfer further deteriorates and the irreversibility is further increased when a linearly decreasing heat-flux distribution is applied to the wall, while the heat transfer deterioration is alleviated when a linearly increasing heat-flux distribution is used. An analysis of the heat transfer mechanism indicates that the turbulence production in the core region of the supercritical flow is suppressed, and the accumulation of gas-like fluid in the near-wall region is promoted by the buoyancy effect in upward flows, leading to severe heat transfer deterioration and a sharp increase in the wall temperature, which is similar to the critical heat-flux phenomenon in subcritical boiling. The present study provides insights into the heat transfer characteristics of SCO 2 flows, as well as practical guidance on the design and optimisation of relevant components and equipment. [ABSTRACT FROM AUTHOR]

The thermohydraulic characteristics of supercritical CO 2 flows in a vertical tube at cooling conditions are numerically investigated, and the influence of the heat-flux condition and of the flow direction are evaluated. Constant (i.e., uniform), linearly increasing and linearly decreasing heat-flux conditions are considered as three typical heat-flux distributions over the pipe length. The simulation results show that there exists a maximum heat transfer coefficient at all heat-flux conditions when the fluid bulk temperature is slightly higher than the pseudo-critical temperature, but also that the heat-flux condition has little effect on the peak value of the heat transfer coefficient. From the viewpoint of the second law of thermodynamics, the influence of the heat-flux condition on the local entropy generation can be attributed to the distributed matching between the heat flux and the difference between the wall temperature and the fluid bulk temperature, as a better matching is associated with a higher uniformity of the local entropy generation and reduced overall irreversibilities. Upward and downward flows are considered, along with flows without gravity as a baseline case for comparison purposes, with the field synergy principle employed to explain the different phenomena in these flows. The buoyancy effect laminarises the downward flows and raises the temperature gradient; hence, the heat transfer deteriorates and the irreversibility increases. In the upward flows, the buoyancy effect augments the turbulence and alleviates the variations in temperature and velocity in the core region, consequently reducing the irreversible loss and enhancing heat transfer. The present study provides insights into the mechanisms of supercritical CO 2 heat transfer characteristics as well as practical guidance on the design and optimisation of relevant components. • Thermohydraulic features of supercritical CO 2 vertical flows were studied at cooling conditions. • Local entropy generation relies on the matching between heat flux and temperature difference. • A better uniformly distribution of local irreversibility leads to a less overall irreversibility. • Heat transfer deteriorates and irreversibility increases in downward flows due to buoyancy effect. • Heat transfer strengths and irreversibility decreases in upward flows due to buoyancy effect. [ABSTRACT FROM AUTHOR]