Search

Sustainable land management is one of the key actions for the achievement of objectives set by the 2030 Agenda for Sustainable Development. In particular, land represents a fundamental resource to address issues of climate change, biodiversity preservation, maintaining ecosystem services, and at the same time ensuring shared prosperity and well-being. Therefore, it is necessary to activate strategies to monitor changes in land use and land cover in order to evaluate strategies for proper management. To do this, the new open source geospatial analysis tools and the increasing availability of remote sensed open data can allow the activation of methodologies for monitoring changes in land use and land cover in order to provide data usable in other research areas or, for example, to implement a decision support system for environmental sustainability. In this study, a GIS approach based on open remote sensing data has been used to perform a spatial analysis of land cover changes within the Basilicata region (Southern Italy) that is spatially expeditious yet accurate. The results showed a very evident land transformation with important repercussions on the environmental components. The ease of use of techniques makes this methodology replicable in other territory and can be used as a preliminary approach to sustainable development model.

Soil degradation is a phenomenon that describes the degradation of soil quality due to which agricultural land in particular is unproductive as a consequence of the loss of ability to produce crops and biomass. The causes are many but, especially in the inland areas of the Mediterranean regions, some dynamics related to agriculture have particularly influenced the grading process. Specifically, agricultural over exploitation with unsustainable practices and land abandonment are causing ecological alterations that require contextual analysis to assess the medium and long-term effects. The aim of this work is to investigate the role of some factors that make up the RUSLE index have in the detection and monitoring of potentially degraded areas. In particular, the areas cultivated with arable crops were chosen as the area to be analyzed, because the average annual rate of soil erosion (A factor in RUSLE equation) is high despite the presence of vegetation cover and shown evident problems due to the phenomenon of degradation. In order to identify the potential degraded areas, two factor of RUSLE index have been correlated: C factor that describes the vegetation cover of the soil and A factor which represent the amount of potential soil erosion. All methodologies have been applied in a rural area in the northern part of Basilicata Region (Italy) using GIS and remote sensing approaches, as allows the possibility to perform a series of a complex studies and can be efficiently implemented in environmental monitoring plans.

The processes of land transformation related to soil erosion and land degradation are complex phenomena that require an approach as detailed and multidisciplinary as possible. In some Mediterranean inland areas, these issues seem to be very connected to the dynamics of transformation and abandonment of agricultural areas. In order to carry out this preliminary investigation for the assessment of dynamics and relationships between processes and land cover, an approach based on GIS and remote sensing has been applied. The study started with implementation of the Revised Universal Soil Loss Equation (RUSLE) model to calculate soil erosion on a monthly and annual basis. The resulting data were then processed through a Getis-Ord local autocorrelation index in order to produce a persistent erosion map. All datasets created were correlated with the cover classes that need more attention, i.e., arable land and post-cultivation vegetation area. All the techniques and methodologies, have been applied in a rural area of the Basilicata Region (South Italy) using exclusively a Free and Open Source Software (FoSS) GIS approach as it guarantees the possibility to perform a series of complex analyses in a simple and effective way so that they can be implemented in environmental monitoring actions and plans.

European Commission in 2009 assessed that in the period 2015–2030 about 11% of agricultural land in the EU are under high potential risk of abandonment due to factors, which has strong and known environmental and socio-economic consequences. The diverse impacts of abandonment need to be addressed via a broader set of policy instruments to alleviate the negative effects or even - reverse the trends in the early stages of the process. The clear identification of abandoned agricultural land is fundamental for a correct mapping for the future management and monitoring of the territories. In this context, this study proposes an innovative method for the detection and mapping of abandoned arable land through the use of remote sensing techniques and geo-statistical analysis. The combined use of Sentinel 2 images and the Landsat constellation, the use of NDVI index and change detection analysis made it possible to identify the change in agricultural use and/or abandonment of land in the eastern part of the Basilicata region in the period 1990–2020. (Italy). All process has been developed integrating Remote Sensing and Geographic Information System (GIS), using open-source software.

Soil erosion in fired areas is one of the main environmental problem involves degrading the quality of the soil and reducing the productivity of the affected lands. The aim of this work is to implement a procedure that analyzes the change detection of the potential soil eroded in a burned area, and discriminate the amount of potential soil loss. As part of the MESARIP project (in agreement with the Regional Civil Protection) in order to implement the analyses of soil erosion pre and post fire event, using Sentinel 2 data and with the RUSLE (Revised Universal Soil Loss Equation) method in a GIS open source environment, a graphical model has been developed. The application of the RUSLE requires a series of consequential spatial analysis elaborations and, according to this scheme, the model has been developed with the Graphical Modeler. QGIS contains in a single environment a multiplicity of tools and algorithms native to other open source GIS software, such as, for example, SAGA GIS and GRASS GIS. The user interface is very simple and requires basic and thematic input data such as DEM, MASK areas or vegetation indices etc. The advantages in the construction of the model can be identified in the standardization of map algebra operations and also in the speed of execution of the steps. Currently the model has been tested in some burned areas in 2019 located in the northern part of the Apulia Region and will be tested in operational mode during the 2020 summer season.

Soil consumption represent an important indicator of soil management, in last few years the European States have been promoted the use and installation of renewable energy sources, with a consequent soil consumption increase. The aim of this work is to implement a procedure that analyzes the change detection of the soil consumption and discriminate those related to soil consumption due to installation of renewable energy sources from that due to built-up areas. The select test site is the Municipality of Melfi (Southern Italy) because is highly significant because is characterized by fragmented and various environments. The increase of urbanization is due to the growth of built-up areas and the exponential development of renewable sources installation. The work herein presented concerns an application study on these processes with the images of Sentinel-2 satellite. In order to produce a synthetic map of soil consumption, the Sentinel-2 images were classified using a supervised classification. A first map of soil consumption was obtained divided the area characterized by urbanization from the area with the presence of the renewable energy sources. Eolic class have been subdivided and reclassified, divided the relevant street from the turbine pad. Eolic class have been reclassified discriminate the relevant street from the turbine pad and subdivided into other subclasses referred to the power wind turbines, in order to quantify the soil consumption related to each one. All processes have been processes developed integrating Remote Sensing and Geographic Information System (GIS), using open source software.

In this paper, we present and discuss the preliminary tools we devised for the automatic recognition of burnt areas and burn severity developed in the framework of the EU-funded SERV_FORFIRE project. The project is focused on the set up of operational services for fire monitoring and mitigation specifically devised for decision-makers and planning authorities. The main objectives of SERV_FORFIRE are: (i) to create a bridge between observations, model development, operational products, information translation and user uptake, and (ii) to contribute to creating an international collaborative community made up of researchers and decision-makers and planning authorities. For the purpose of this study, investigations into a fire burnt area were conducted in the south of Italy from a fire that occurred on 10 August 2017, affecting both the protected natural site of Pignola (Potenza, South of Italy) and agricultural lands. Sentinel 2 data were processed to identify and map different burnt areas and burn severity levels. Local Index for Statistical Analyses LISA were used to overcome the limits of fixed threshold values and to devise an automatic approach that is easier to re-apply to diverse ecosystems and geographic regions. The validation was assessed using 15 random plots selected from in situ analyses performed extensively in the investigated burnt area. The field survey showed a success rate of around 95%, whereas the commission and omission errors were around 3% of and 2%, respectively. Overall, our findings indicate that the use of Sentinel 2 data allows the development of standardized burn severity maps to evaluate fire effects and address post-fire management activities that support planning, decision-making, and mitigation strategies.

This article is focused on the FIRESAT methodology developed for and funded by the Protezione Civile of the Basilicata Region. The fire monitoring system is based on satellite free of charge data and developed for the dynamic estimation of vegetation fire susceptibility and fire impact in forest and non-forestry ecosystems. The purpose of this fire risk system is the timely (daily) and detailed (from 1 km down to 30 m) monitoring of the vegetation and meteorological conditions which can affect the proneness of vegetation to fire. FIRESAT provides operational monitoring tools for a systematic forest fire management from risk estimation to fire severity mapping, including the estimation of fire damage on hydro-geological risk and vegetation fire resilience.