Search

Purpose We sought to evaluate features of partial remission (PR) in children with type 1 diabetes mellitus (T1DM) using the insulin-dose adjusted A1c (IDAA1c) definition and to identify risk factors associated with nonremission. Methods Medical records of patients with newly diagnosed T1DM between January 1, 2008, and June 30, 2018, were retrospectively reviewed. Hemoglobin A1c (HbA1c) readings and insulin total daily doses (TDDs) of each patient at each follow-up visit were obtained with IDAA1c values calculated. PR was defined as an IDAA1c score of 9 points or less within 6 months of diagnosis. The trends of HbA1c and TDD within 2 years after diagnosis were compared between remitters and nonremitters. Factors that may predict the occurrence of PR were studied, with their relative risks of nonremission calculated. Results PR occurred in 26 patients (45.6%), including 8 girls and 18 boys, with a median duration of 8 months. The frequency of remission in male patients was significantly higher (P=0.002) and the relative risk of female sex with nonremission was 2.20 (95% confidence interval [CI], 1.24-3.91), which remained significant when adjusted by multivariate regression modeling. The initial HbA1c level at diagnosis was also significantly higher in the nonremission group (P=0.029), with a relative risk of 1.12 (95% CI, 1.01-1.25). Both HbA1c (P=0.012) and TDD (P=0.006) were significantly lower within 2 years after diagnosis among remitters than in nonremitters. TDD was significantly lower in male patients (P=0.029) during the same period, while there was no significant difference in HbA1c level between male and female patients (P=0.163). Conclusion Both the initial HbA1c level at diagnosis and sex were factors associated with the occurrence of PR. Female sex was an independent risk factor of nonremission, likely resulting from a higher insulin requirement in female T1DM patients.

Background: Obesity in pediatric and adolescent population has reached a universal pandemic. This study aimed to summarize the literature on the longest available outcome of bariatric surgery in morbidly obese adolescents. Methods :A systematic review was conducted to pool available data on the longest available (> 3 years) weight loss and comorbidity resolution outcome in adolescent bariatric surgery. Results: A total of 14 studies reporting the result of bariatric surgery after 3 years in 950 morbidly obese adolescents were included. Preoperative age and BMI ranged from 12 to 19 years and from 26 to 91 kg/m(2), respectively. Females were the predominant gender (72.8%). Laparoscopic roux-en-Y gastric bypass (n = 453) and adjustable gastric banding (n = 265) were the most common bariatric procedure performed. The number of patients at the latest follow-up was 677 (range from 2 to 23 years). On average, patients lost 13.3 kg/m(2) of their BMI. Among comorbidities, only diabetes mellitus resolved or improved dramatically. Of 108 readmissions, 91 led to reoperation. There was a weight regain

Representation and computation are the best tools we have for explaining intelligent behavior. In our program, we explore the space of representations present in the mind by constraining them to explain data at multiple levels of analysis, from behavioral patterns to neural activity. We argue that this integrated program assuages Brette's worries about the study of the neural code.

Structural aluminum alloys are used in marine applications where light weight and increased speed are paramount. The 5xxx series alloys are the ideal choice, providing an optimum combination of as-welded strength and general corrosion resistance. A particular concern is sensitization in service. Aluminum is considered sensitized when a nearly continuous network of β phase forms along the grain boundaries. The β phase is anodic to the Al matrix, and, when exposed to sea water and sufficient loading, provides a clear pathway to stress corrosion cracking (SCC). The degree of β-phase precipitation is driven by a combination of time and elevated temperature. For over a decade, SCC of Al superstructures has plagued Navy ships. To address this issue, relevant technologies have been adopted, adapted, and developed to combat this issue. More specifically, the technology areas involve the detection of sensitization, the mitigation of SCC, and the replacement of corrupt materials. The technologies discussed herein a...

As high-strength thinner-steel implementation in ship designs increase, dimensional management becomes critical to control construction costs and schedule in ship production. In the U.S. shipbuilding industry, improvements to shipbuilding facilities and processing technology have not kept pace with the rate of change in ship design. Additionally, new designs using thinner steels are subject to legacy weld sizing criteria possibly leading to inappropriately sized welds on lightweight materials. These two factors result in widespread overwelding, causing severe plate deformation in naval vessels during construction and nonvalue added labor to correct as needed for fit-up tolerances. Historically, shear and fatigue strength data has been focused on the larger welds and thicker steel plates typical of the state of the practice when these legacy weld sizing criteria were developed. In order to optimize weld design and production in modern, lightweight naval surface vessels, there is a need to develop more accurate data about the performance of precision fillet welds for thin steels.

This economic evaluation study examines the authors’ experience of prescribing tafamidis in terms of their cost and the insurance status of patients.

Simulation is an important alternative to evaluate cricothyrotomy, a rare life-saving procedure. This crossover study aimed to determine whether contextualization of a crisis scenario would impact the performance of a cricothyrotomy procedural task. Sixty-five anesthesia assistants and emergency medicine and anesthesia residents underwent a teaching session in surgical cricothyrotomy using one of two sets of cricothyrotomy kits: the Portex 6.0 and Melker 3.5 (n = 32) or the Portex 6.0 and Melker 5.0 (n = 33). Within six weeks following the session, the participants performed cricothyrotomies on a full-body patient mannequin simulator coupled with a porcine larynx (tissue-mannequin simulator) using the assigned two kits in a “cannot intubate, cannot ventilate” (CICV) contextualized scenario (CS) and in a CICV verbalized non-contextualized scenario (NCS). Each participant performed a total of four cricothyrotomies using the two kits in the two scenarios. The primary outcome measure was insertion time, and secondary outcome measures were severity of injuries and failure rate. Outcome measures were compared between scenarios for each kit. Mean (SD) insertion time for a successful cricothyrotomy was not significantly different between NCS and CS for the Melker 3.5 [83.0 (45.0) sec vs 63.3 (36.1) sec, respectively; P = 0.96; mean difference (MD), 19.7 sec; 95% confidence interval (CI), −1.9 to 41.3], the Melker 5.0 [86.5 (36.8) sec vs 107.1 (55.6) sec, respectively; P = 0.11; MD, −20.6 sec; 95% CI, −44.9 to 3.7], and the Portex 6.0 [59.5 (35.5) sec vs 59.0 (35.0) sec, respectively; P = 0.95; MD, 0.5 sec; 95% CI, −13.2 to 14.2]. Failure rate and severity of injuries, measured as mean average injury score for each kit, were also similar between scenarios. Contextualization of a crisis scenario did not affect the performance of a cricothyrotomy procedural task on a tissue-mannequin simulator. These findings may have implications when considering the feasibility and cost-effectiveness for assessing the performance of cricothyrotomy procedural tasks.

As high-strength thin-steel use in ship design increases, dimensional management becomes critical to control construction costs and schedule in ship production. In the U.S. shipbuilding industry, improvements to shipbuilding facilities and processing technology have not kept pace with the rate of change in ship design. Additionally, new designs using thinner steels are subject to legacy weld-sizing criteria, which may inappropriately size welds on lightweight materials. These two factors result in widespread overwelding, causing severe plate buckling in naval vessels during construction. The problem of overwelding has two distinct sources:the weld-sizing methods developed in the 1980s are still used in most shipbuilding specifications regardless of ship class. This prevents the incentive of application of latest technologies that can make strong, precision fillet welds for modern lightweight thin steel naval surface combatants; andshipyard welders tend to make welds even larger than design requirements to satisfy naval production specifications, which do not allow for any undersized welds. On average, production welds are 3 mm larger than design, which can more than double the heat input and distortion caused by welding. The approach to the solution of this overwelding problem will be described in detail in this article:develop appropriate weld-sizing criteria for thin plate structures; this can be facilitated by numerical modeling to ensure adequate static shear, tensile, bending, fatigue, and dynamic impact capacity of structural welds; andperform a robust designed experiment to establish confidence that small weld sizes can provide necessary performance and strength to meet the design service life of the vessel and provide data to NAVSEA technical warrant holders to support the implementation of an underweld tolerance for ship production to prevent overwelding.

The apparent slip effects of laminar water flow in smooth hydrophobic microchannels and patterned hydrophobic microchannels were investigated. A series of experiments were performed to demonstrate the drag reductions for laminar water flow in hydrophobic microchannels. These microchannels were fabricated from silicon wafers using photolithography and were coated with hydrophobic octadecyltrichlorosilane (OTS). To generate a larger drag reduction, the patterned hydrophobic microchannels were fabricated to allow the liquid to flow over a region of trapped air in the cavity between the microridges. With the geometrical dimensions used, pressure drop reductions ranging from 10 to 30 % were found in the smooth microchannels and patterned microchannels. The pressure drop reduction was shown to increase with increasing microridge spacing and decreasing microchannel width. Using micro-particle image velocimetry (PIV), we measured an apparent slip velocity at the wall of approximately 8 % of the centerline velocity, yielding a slip length of approximately 2 μm in the smooth hydrophobic microchannel. Theoretically, the analytical solution derived for three-dimensional flow in a rectangular duct is presented to predict the slip velocity and slip length at the wall based on the pressure drop measurement. These results are in agreement with the experimental data obtained using micro-PIV.

The Construction Industry Review Report has highlighted the recent spate of non-compliant construction incidents in Hong Kong, which has prompted widespread public concern on the quality of construction projects. Whilst public housing has received special attention due to extensive coverage in the media, the quality of private housing has seldom been put under the spotlight, thereby raising the question as to whether private sector works are of better quality than public sector works.Faced with this question and the increasing drive towards benchmarking in the construction industry, it appears that an objective measure of quality is necessary, both for providing feedback to designers and for raising the quality standards of construction works. Being inspired by the benefits brought about by the CONQUAS system in Singapore, the Housing Authority in Hong Kong had developed and implemented the PASS system for benchmarking workmanship quality in the public housing sector since 1990. As yet, there has ...

The records of 141 consecutive patients with proven tuberculosis (TB) were reviewed to examine for changes in their serum proteins, erythrocyte sedimentation rate (ESR) and tuberculin skin test reactivity. Hypoalbuminaernia was present in 73% of patients and hyperglobulinaentia was seen in 92% of patients. ESR showed a negative correlation with the serum albumin level but a positive correlation with the serum globulin level. In the case of pulmonary TB, ESR was higher in patients with radiologically more extensive disease. Tuberculin reactivity was reduced in patients who were older, those with more severe Iiypoalbuininaemia and those with disseminated TB.

Aim: (i) To determine the ability of general practitioners (GPs) and paediatricians to correctly identify children as overweight or obese by visual cues alone; (ii) to describe the current management practices of overweight and obese children by these practitioners; and (iii) to compare these with National Health and Medical Research Council (NHMRC) Clinical Practice Guidelines. Methods: Forty-four GPs and 29 paediatricians participated in the study. Respondents completed a questionnaire based on a series of body images, rating the size of the child as acceptable weight, overweight or obese and indicating the likelihood of carrying out a series of management options. Results: There was considerable variation in ability to rate images correctly with the total number of correct responses being 72% and 68%, respectively, for GPs and paediatricians. There were statistically significant differences in management between GPs and paediatricians in terms of conducting appropriate anthropometry and screening for co-morbidities, with paediatricians performing closer to the NHMRC Clinical Practice Guidelines. Conclusion: GPs and paediatricians have the opportunity to screen children for overweight and obesity during their everyday practice. Accurate determination of weight status cannot be performed by visualisation alone and all children should have height and weight measured and correctly interpreted. Some areas of current GP and paediatrician management of overweight and obese children fall short of the NHMRC clinical guidelines and areas for improvement are highlighted in this paper.

• We tested the hypothesis that the increased permeability in the pulmonary microcirculation seen with endotoxin is caused by the release of oxygen radicals from activated neutrophils. We first compared the pulmonary injury in sheep caused by low-dose endotoxin with that produced by phorbol myristate acetate, an agent that selectively causes the release of oxygen radicals from neutrophils. We then determined the degree of lung tissue lipid peroxidation, a reflection of direct oxygen radical damage after endotoxin and phorbol myristate acetate. Both agents produced a nearly identical increase in protein permeability; however, peroxidation was only evident with phorbol myristate acetate. Higher doses of endotoxin did result in increased lung peroxidation as well as a more severe physiologic injury. We can conclude that oxygen radical release, most likely from neutrophils, occurs with endotoxin. However, the permeability injury may not be the direct result of increased lipid peroxidation, as increased permeability can be seen without measurable increases in this parameter. ( Arch Surg 1984;119:77-82)

Our purpose was, in general, to determine the effect of a body burn on the pulmonary response to endotoxemia and, specifically, to determine whether increased thromboxane (TxA2) production by the burn wound was responsible for the accentuated lung injury. Thirty-two unanesthetized sheep with lung and soft tissue lymph fistulae were studied. Twelve sheep were given a sublethal dose of intravenous E. coli endotoxin (2 micrograms/kg). A characteristic two-phase injury was noted as evidenced by early pulmonary hypertension and hypoxia and later increased lung permeability. TxA2 was significantly increased in lung lymph as well as aortic plasma relative to venous plasma, indicating the lung to be the source. Twelve of 12 sheep survived. Five of 13 sheep died from endotoxemia when given 3-5 days after a 25% total body surface (TBS) burn and five of seven died with endotoxin (2 micrograms/kg) and a 50% burn. Physiologic parameters were at preburn levels before endotoxin. Animals died both during the early phase from hypoxia and the later phase due, in large part, to increasing pulmonary dysfunction. Absolute levels of TxA2 were not increased in the postburn animals, nor was there a clear release of TxA2 from burn tissue to explain the accentuated response. Prostacyclin levels were, however, less elevated in postburn animals in response to endotoxin, thereby altering the TxA2/PGI2 ratio in favor of TxA2. However, a cause and effect relationship between the increased lung injury and TxA2 remains undetermined. Lymph flow or lymph protein content was not altered in burn tissue in response to endotoxin.

Our purpose was to determine whether peripheral soft tissues produce and release prostanoids in response to local sepsis, and whether this mediator release can produce pulmonary dysfunction. Escherichia coli endotoxin (2 micrograms/kg in 100 mL of saline) was injected below the hide of the flank in seven unanesthetized sheep. In three additional sheep, ibuprofen (12.5 mg/kg of body weight) was injected with the endotoxin. Thromboxane B2 and 6-keto-PGF1 alpha (prostacyclin) levels were measured in tissue lymph draining the flank, lung lymph, pulmonary artery (Ppa), and aortic plasma. One hour after endotoxin administration, mean PaO2 decreased from 90 to 74 mm Hg and Ppa increased from 22 to 35 mm Hg. Lung lymph flow (QL) increased only 50% with QL being protein poor. No increase in lung or peripheral soft-tissue vascular permeability was noted. Tissue lymph (TxB2) increased from 220 +/- 114 to greater than 10,000 pg/mL with levels in Ppa plasma increasing from 300 +/- 128 to 595 +/- 124 pg/mL and aortic plasma from 270 +/- 141 to 410 +/- 104 pg/mL. Lung lymph TxB2 paralleled aortic values. Peak levels of 6-keto-PGF1 alpha in systemic lymph exceeded 2,000 pg/mL while levels in lung lymph remained relatively constant. The pulmonary injury and the increase in TxB2 was prevented by ibuprofen. We conclude that the response of soft tissue to local endotoxin is to release thromboxane in quantities sufficient to raise plasma levels and to produce hypoxia and pulmonary hypertension. The lung dysfunction is not produced by an increase in lung water or vascular permeability.

The release of oxygen radicals, in particular the hydroxyl radical, from sequestered neutrophils produces acute lung injury after a number of insults. Our purpose was to determine whether hydroxyl radical, OH., is responsible for the lung injury from endotoxin characterized by (1) pulmonary leukostasis, (2) increased thromboxane production leading to pulmonary hypertension and hypoxia, and (3) increased protein permeability. This hypothesis was tested by infusion of a selective OH. scavenger, dimethyl thiourea (0.75 gm/kg), into unanesthetized sheep before endotoxin and comparison of the response to that seen with endotoxin alone. Pulmonary vascular integrity was measured by the use of lung lymph flow, QL, and lymph protein transport. Thromboxane A2 was measured as TxB2 and prostacyclin as 6-keto-PGF1 alpha. We found no difference in the degree of leukopenia and hypoxia after endotoxin or the levels of TxB2, 6-keto-PGF1 alpha, and pulmonary hypertension with dimethyl thiourea, compared with endotoxin alone. The permeability injury was also identical, with a twofold to threefold increase in protein-rich lymph seen in both groups. It appears that OH. does not play a major causative role in either phase of endotoxin lung injury.