Search

Summary Objective This pragmatic, multicenter, open-label, randomized controlled trial (RCT) aimed to compare the effectiveness, safety, and cost–utility of a custom-made knee brace versus usual care over 1 year in medial knee osteoarthritis (OA). Design 120 patients with medial knee OA (VAS pain at rest >40/100), classified as Kellgren–Lawrence grade II-IV, were randomized into two groups: ODRA plus usual care (ODRA group) and usual care alone (UCA group). The primary effectiveness outcome was the change in VAS pain between M0 and M12. Secondary outcomes included changes over 1 year in KOOS (function) and OAKHQOL (quality of life) scores. Drug consumption, compliance, safety of the knee brace, and cost–utility over 1 year were also assessed. Results The ODRA group was associated with a higher improvement in: VAS pain (adjusted mean difference of −11.8; 95% CI: −21.1 to −2.5); all KOOS subscales (pain: +8.8; 95% CI: 1.4–16.2); other symptoms (+10.4; 95% CI: 2.7–18); function in activities of daily living (+9.2; 95% CI: 1.1–17.2); function in sports and leisure (+12.3; 95% CI: 4.3–20.3); quality of life (+9.9; 95% CI: 0.9–15.9), OAKHQOL subscales (pain: +14.8; 95% CI: 5.0–24.6); and physical activities (+8.2; 95% CI: 0.6–15.8), and with a significant decrease in analgesics consumption at M12 compared with the UCA group. Despite localized side-effects, observance was good at M12 (median: 5.3 h/day). The ODRA group had a more than 85% chance of being cost-effective for a willingness-to-pay threshold of €45 000 per QALY. Conclusions The ERGONOMIE RCT demonstrated significant clinical benefits of an unloader custom-made knee brace in terms of improvements in pain, function, and some aspects of quality of life over 1 year in medial knee OA, as well as its potential cost–utility from a societal perspective.

Isolated traumatic radial head dislocation is exceedingly rare in adults, usually diagnosed on an emergency basis, and reduced by external manoeuvres. If the diagnosis is not made immediately, external reduction is no longer feasible. Various options have been described for treating these chronic forms, including therapeutic abstention, radial head resection and annular ligamentoplasty combined, if appropriate, with osteotomy of the ulna. In patients with incapacitating symptoms, proposing a surgical option makes sense. Here, we describe the technique developed by PM Grammont, which combines ligamentoplasty and an oblique flat osteotomy of the ulna. We used this technique in a 31-year-old male with isolated anterior dislocation of the radial head of 3 months’ duration. One year after surgery, he had fully recovered range of motion in all planes. He returned to work 5 months after surgery. The promising clinical and radiological outcomes in our patient support the use of this technique in adults with chronic isolated radial head dislocation. Level of evidence IV.

Introduction: Knee osteoarthritis is the main indication for primary total knee arthroplasty (TKA). It is now accepted that cementless implantation of the femoral component provides equivalent results to cemented one, however, the optimal fixation method of the tibial component remains controversial. The purpose of this study was to compare the survivorship of cemented versus cementless tibial baseplate in primary total knee arthroplasty.Materials and methods: We carried out a retrospective, monocentric study, including 109 TKA (Zimmer®Natural Knee II ultra-congruent mobile-bearing) implanted between 2004 and 2010 for primary osteoarthritis, comparing 2 groups depending on tibial component fixation method, one cemented (n = 68) and one cementless (n = 41). Clinical (Knee Society Rating System (KSS), Hospital for Special Surgery (HSS) scores, range of motion) and radiodiological outcomes were assessed at last follow-up with a minimal follow-up of 5 years.Results: Mean follow-up were 8.14 [5.31–12.7] and 8.06 [5.22–12.02] years, respectively, in cemented and cementless groups. The tibial component survival rate was 100% [95CI: 91.4–100] in the cementless group and 97.1% [95CI: 89.78–99.42] in the cemented group (2 aseptic loosenings) (p = 0.27). Radiolucent lines were present in 31.7% (n = 13) of the cementless and 44.1% (n = 30) of the cemented baseplates (p = 0.2). The postoperative KSS knee score was higher in the cementless group (99 ± 3 vs. 97 ± 7.5;p = 0.02), but there was no significant difference in KSS function, global KSS and HSS scores. Mean range of flexion was 120 ± 10° in the cementless group and 122.5 ± 15° in the cemented group (p = 0.37). No significant differences were found on the radiographic data or on complications.Conclusion: In this study, the survival rate of the tibial component is not influenced by its fixation method at a mean follow-up of 8 years in osteoarthritis, which confirms the reliability of cementless fixation in primary TKA.

International audience; PURPOSE: The gold standard for intramedullary nailing (IMN) in humeral shaft fracture treatment is bipolar interlocking. The aim of this study was to compare clinical and radiographic outcomes in two cohorts of patients treated with IMN with or without distal interlocking. We hypothesized that there was no significant difference between isolated proximal interlocking and bipolar interlocking in terms of consolidation and clinical results.METHODS: One hundred twenty-one acute humeral shaft fractures were retrospectively included in group WDI (without distal interlocking screw, n=74) or in group DI (with distal interlocking screw, n=47). One hundred six patients (87.60%) could be verified by an X-ray, and 63 (52.07%) could be examined clinically. Fracture union at 6months was the primary outcome, and the second was the final clinical outcome for shoulder and elbow after at least 6months of follow-up. Pain, operating time, and radiation time were also analyzed.RESULTS: The two groups were not significantly different for population, fractures, or immobilization duration. No significant difference was found for bone union (WDI 89.06% vs DI 83.33%, p=0.51), shoulder or elbow functional outcomes, or pain. However, there were significant differences in advantage to the WDI group for operating time (WDI 63.09±21.30min vs DI 87.96±30.11min, p

Complications following arthroscopy of the elbow for the treatment of lateral epicondylitis are essentially related to the anterior arthroscopic approach. The principal aims of this study were to describe and evaluate the mixed arthroscopic and endoscopic surgical technique using posterolateral approaches exclusively. This was a retrospective study of consecutive patients operated on between 2005 and 2014 for lateral epicondylitis following more than 6 months of ineffective medical treatment. The exploration was arthroscopic via a distal posterolateral portal. The extensor carpi radialis brevis was disinserted via a proximal extra-articular posterolateral endoscopic portal. The postoperative clinical follow-up included subjective (visual analog scale, Nirschl) and objective (Mayo Clinic Elbow Performance Score) evaluations of pain, the time to return to work, the level of satisfaction, complications, and failures. Thirty-seven patients underwent the procedure, including 3 lost to follow-up. Mean±SD follow-up was 32.8±24.7 months. Mean±SD visual analog scale scores were 0.8±0.8 at rest, 2.4±1.3 during everyday activities, and 3.1±1.5 during effort. Mean±SD Mayo Clinic Elbow Evaluation Score was 10.1±1.0 of 12 and mean±SD Mayo Clinic Elbow Performance Score was 91.9±12.5 of 100. Mean±SD Nirschl score was 67.5±9.6 of 80. Mean±SD time to return to work was 2.0±2.6 months. The level of satisfaction was 94.1%. The failure rate was 2.9%, with no neurological lesions. With equivalent or even better results than those already published, this surgical procedure enables the treatment of lateral epicondylitis via posterolateral portals alone, thus avoiding the complications inherent to anterior and medial arthroscopic approaches. [ Orthopedics . 2019; 42(6):e521–e527.]

Background UniSpacer™ type implants were part of the therapeutic armamentarium for medial tibio-femoral osteoarthritis before they were taken off the market in 2011. UniSpacer™ is a mobile interpositional self-centring implant that replicates the shape of the meniscus. It requires no bone cuts or component fixation. The objective of this follow-up note is to provide data on the 10-year outcomes in a cohort investigated previously in a study published in 2011. This study provides a re-evaluation of implant survival 5 years after the first analysis, as well as information on patient satisfaction and functional outcomes. Hypothesis UniSpacer™ survival remains stable after 5 additional years and provides satisfactory functional outcomes. Material and methods We included the same patients operated on from 2003 to 2009, namely, with 17 UniSpacer™ implants in 16 patients. The operative technique was the same in all patients. At last follow-up, the patients attended a visit designed specifically to allow a clinical evaluation (IKS score, revision, forgotten implant) and new radiographic imaging of the treated knee. Results Mean follow-up of this retrospective study of a prospective database was 118 ± 25 months. Of the 17 implants, 9 (53%), in 8 patients, were still in place. Six (37.5%) patients underwent early revision arthroplasty (between 6 months and 4 years). One patient was lost to follow-up and another had died. The mean global IKS knee score was 76 ± 15 and the mean IKS function score was 80 ± 25. The global IKS score at last follow-up was 157 ± 39. Mean range of flexion was 119 ± 20°. Of the 8 patients (9 implants) who still had their implants at last follow-up, 5 (56%) reported forgetting their implant. No revisions were performed between 4 and 10 years of follow-up. Discussion The ten-year survival was limited (53%). Clinical outcomes were satisfactory in the patients who still had their implants. The low cost and simplicity of insertion may make this implant a reasonable alternative for patients with contraindications to very major surgery. Level of evidence IV.

Objectives: Arthroscopic adaptation of the Trillat procedure has become a part of the armamentarium for anterior shoulder instability. As the first team to have described a surgical technique, we present the results of our first 100 patients. Methods: This is a cohort study on a prospective database, descriptive of patients who had undergone surgery for chronic anterior shoulder instability between March 2011 the date our technique was developed, and October 2019. Patients were clinically and radiologically evaluated preoperatively (standard radiographs, CT scan) and postoperatively (standard radiographs) at 1, 3, 6 and 12 months and by CT scan 6 months postoperatively to evaluate the consolidation of the coracoid fracture and subscapularis muscle trophicity. Functional results were evaluated by Constant, SSV, Walch/Duplay and Rowe scores and recurrences of accidents due to instability and complications were collated. Results: 100 patients, mean follow-up of 25 months (6-96), mean age, 29 years (15-73), 71% sportspeople, mean age at first episode, 20 years (7-59), 20% hyperlaxity. 67% notches, 22% bony Bankart, 15% glenoid wear and 2% rotator cuff tear. The surgical technique was identical, there were 3 operators, average operating time was 50 min (26-145), 70% were ambulatory, there were 13 fractures and no conversion to an open technique. At the last follow-up there were 3 recurrences of luxation and 4 recurrences of subluxation and in 4 cases failure to recover muscle tone was noted. 95% of the sportspersons resumed their activity, 81% at the previous level. One year postoperatively, the Walsh-Duplay score was 88 (40-100) and the Rowe score was 92 (40-100). There were 4 cases of pseudoarthrosis, 3 of which were due to a technical defect, 2 coracoid fractures, 1 case of resolving sepsis and no neurological complications. There was no damage to the subscapularis. 97% of the patients were satisfied or very satisfied. Conclusion: This is the largest available series on the arthroscopic Trillat procedure. The results are identical to those in the preliminary series and as good as those for the reference techniques. Failures and complications were few and often the result of technical errors. The recovery of muscle tone in the limb on which surgery was performed seemed to influence the effectiveness of stabilization.

International audience; The Trillat procedure performed as open surgery to treat anterior shoulder instability has been proven effective in preventing recurrences and restoring range of motion. An arthroscopically assisted variant of the Trillat procedure is described here, together with the preliminary clinical results in 18 patients treated between 2011 and 2014. After a mean follow-up of 24.7±9.8 months, the clinical outcomes were very satisfactory, with a Walch-Duplay score of 81.5±18.0, a Rowe score of 83.6±16.0, and 94% of satisfied or very satisfied patients. Mean operative time was 55±13min. No recurrences were recorded. As an easily performed procedure that provides good clinical outcomes, the arthroscopically assisted Trillat procedure is a simple and reproducible alternative to arthroscopic Latarjet procedure, which is still reserved for highly experienced surgical teams.

International audience; PURPOSE:In practice, obesity leads to poor functional outcomes after total hip arthroplasty (THA). However, in clinical research, the influence of body mass index (BMI) on the gait recovery and kinematics for THA is not well documented. The purpose of this study was to assess the influence of BMI on gait parameters pre-operatively and six months after THA for hip osteoarthritis (OA) patients.METHODS:We included 76 THA for hip OA: non-obese group (G1): 49 (BMI

International audience; Treatment of acetabular fracture is complex, requiring adapted and often extensive surgical approaches. We describe a modified iliofemoral approach, with the particularity of including iliac crest osteotomy sparing abdominal muscles to allow direct control of reduction while respecting the abdominal muscles, creating a workspace as close to the fracture as possible, without involving the inguinal canal or femoral vascular-neural bundle. In 15 complex fractures, the technique provided 13 excellent or good reductions and 13 excellent or good results according to the Matta criteria. This approach can be combined with others, such as a posterior approach, thus providing an alternative to the ilioinguinal approach in the treatment of complex acetabular fracture.

International audience; Introduction Morphological studies of the humerus have shown that the position of the bicipital groove varies with the individual and the retroversion of the humeral head. Depending on the authors, these two parameters are independent or associated. This study evaluated the relationship between the humeral head axis and its retroversion and the bicipital groove relative to the humeral biepicondylar line.Materials and methods Seventy cadaveric humeri were scanned to obtain 3D reconstructions. Views of the 3D reconstruction from above showed the bicondylar line, the bicipital groove and the humeral head on a single image. After measuring the humeral retroversion angle and the bicipital groove angle relative to the bicondylar line, we assessed the relationship between these two angles with Pearson's correlation coefficient.Results Pearson's correlation coefficient indicated a significant linear correlation between the angle of the groove and the angle of humeral retroversion based on the 70 cadaveric humeral bones (the p-value was 7.5(10) (7), the correlation coefficient was -0.5515, and the 95% confidence interval was (-0.6962; -0.3636)). Our study thus demonstrates that the less lateralized the bicipital groove is, the greater the humeral retroversion will be.Conclusion We demonstrated a linear relationship between humeral head retroversion and bicipital groove lateralization. Within our reliability interval, this relationship can be used in clinical practice to evaluate retroversion without resorting to CT of the entire humerus.

International audience; Osteonecrosis of the femoral head affects mainly young patients with high functional needs this increases the risk of dislocation. Dual mobility cups known for low rate of dislocation and high mobility range seems indicated. We evaluate functional efficiency, survival and dislocation rate of dual mobility cup for total hip arthroplasty for osteonecrosis in young patients. Monocentric retrospective clinical study, from 2000 to 2008. With a clinical analysis in pre-operative and over ten years of follow-up of one cohort of patients under 55 years old with an indication of THA for ONFH. The judgement criteria was: clinical scores at the maximal follow-up, the dislocation rate, and the cumulate survival rate over ten years follow-up. Forty THA in 31 patients, nine bilateral cases, 23 males and eight females with average age of 44 (+/- 4) years old. In pre-operative: PMA 11 (+/- 3.3), HHS 50,8 (+/- 15.5). At the final follow-up of 129.8 (+/- 33.8) months: PMA (17.4 +/- 1.12), HHS (95.7 +/- 6.9), no dislocation. We had 11 deaths on average at 95.2 +/- 47.3 months. The cumulate survival rate over ten years follow-up is 100% without revisions or long-term dislocation. Analysis concludes to very significant functional improvement without any dislocation despite the young population with high level of activity. Thus, dual mobility cups is a reliable choice preventing dislocation with a very good survival rate without premature wear, preserving mobility and activity.

International audience; Purpose In the literature, there are several techniques for measuring the glenoidal version of the scapula. The superiority of the scannographic measurement over the standard radiologic measures seems evident. The main problems are the evaluation and the reproducibility of these methods, which are dependent on the quality of the CT scan and the orientation of its sections. We pinpoint a simple method of the "scapular triangle", the reliability of which deserves special consideration. The aim of this study is to report a simple and reproducible computed tomography method to measure the glenoidal version.Methods Thrity-one shoulder CT scans, performed on patients attending the emergency department of the University Hospital of Dijon between January 2012 and April 2013 for shoulder trauma, were evaluated retrospectively. The CT scan must include the entire body of scapula to allow measurements to be made with both methods: the conventional method of Friedman and our new method of the "scapular triangle". Two independent operators performed inter-observer and intra-observer reproducibility. We compared both techniques with Pearson's test.Result Pearson's test showed a trend line according to a linear correlation between the two methods with a p value of 7.791(-10) and a correlation coefficient of 0.85 with the 95 % confidence interval (0.7213; 0.929).Conclusion The method of the "scapular triangle" is easily applicable on most sections of the CT scan of scapula whether or not it takes the whole body. It is more reliable and reproducible and could be used by any radiologist.

International audience; PURPOSE: We assumed that the combination of dual-mobility total hip arthroplasty (THA) using the minimally-invasive Röttinger anterolateral approach could guarantee hip stability with faster functional recovery. We objectively analyzed functional improvement after dual-mobility THA by quantitative gait analysis.METHODS: We compared the results achieved following two different surgical approaches: Röttinger's versus Moore's approach (posterolateral approach). We included 70 patients in an open prospective single-centre study: 38 by Rottinger's approach (age = 67yo) and 32 by Moores's approach (age = 68yo). Clinical and biomechanical analysis (kinematic and kinetic parameters of the hip) were conducted at the pre-operative period and at six months post-op RESULTS: We found a significant improvement in all clinical scores and all biomechanical parameters but no difference was found between the two approaches. However, the study showed marked clinical, biomechanical and functional improvements for patients treated with dual-mobility THA for osteoarthritis without complete hip recovery compared with a control group.CONCLUSIONS: The combination of the Röttinger approach with a dual-mobility cup remains a valid choice for primary THA without functional advantage at midterm.

In this article, we report the case of a patient with a symptomatic accessory soleus muscle with an atypical clinical presentation. As the existence of this accessory muscle went unrecognized for a long time, various diagnoses of the patient's condition were made. Initially, the patient was treated for muscle strain and compartment syndrome, but the second MRI revealed the accessory muscle and led to appropriate diagnosis and surgical treatment.

SummaryOsteoid osteoma is a common benign bone tumor affecting the young adult with typical clinical and radiographic presentation in its most common locations. However, when arising in unusual intra-articular locations, diagnosis may appear confusing and lead to delayed management. We present the case of a 24-year-old man with intra-articular osteoid osteoma of the hip involving the posteroinferior quarter of the femoral head. This unusual location was at the origin of unexplained pain and delayed diagnosis made 18months after the onset of symptoms since the initial magnetic resonance imaging (MRI) examination could not identify the lesion whereas it was detected on bone scintigraphy and thin slice CT imaging. Due to the complex location providing difficult access for radioguided techniques, an open surgical management was suggested and performed through a limited posterolateral approach with no hip dislocation, after identification of the circumflex pedicle. Following complete surgical excision of the tumor, the diagnosis could be confirmed after histopathologic analysis. No recurrence was observed.

The increased use of the reverse prosthesis over the last 10 years is due to a large series of publications using the reverse prosthesis developed by Paul Grammont. However, there is no article reporting the story of the concepts developed by Grammont. The purposes of this review are to describe the principles developed by Grammont, the chronology of development, and the biomechanical concepts and studies that led to the current design of the reverse prosthesis. We selectively reviewed literature and provide personal observations. From phylogenetic observations, Grammont developed the principle of functional surgery applied to the rotator cuff tears. To increase the deltoid lever arm, he imagined two possibilities: the lateralization of the acromion, which facilitates the action of the rotator cuff, and the medialization of the center of rotation, which has been developed to respond to situations of rotator cuff deficiency. Grammont proposed the use of an acromiohumeral prosthesis, which was quickly abandoned due to problems of acromial loosening. Finally, Grammont used the principle of reverse prosthesis developed in the 1970s, but made a major change by medializing the center of rotation in a nonanatomic location. In 1985, Grammont validated the concept by an experimental study and the first model using a cemented sphere was implanted. The development of the modern reverse prosthesis is the result of the intellectual and experimental work conducted by Grammont and his team for 20 years. Knowledge of this history is essential to envision future developments.

We provide a link to the original description of the “delta” reverse shoulder arthroplasty published in 1993 by Paul Grammont and Emmanuel Baulot. While many surgeons view “anatomic reconstruction” as essential for virtually all operations, Grammont recognized that not all reconstructions needed to be anatomic and in fact some problems with so-called anatomic reconstructions could be solved by developing nonanatomic approaches. Through careful reasoning and intuition, Grammont and Baulot suggested placing the ball of the shoulder on the glenoid and the concave matching surface on the humerus in patients with an absent rotator cuff (essentially rendering any anatomic reconstruction “nonanatomic” when the cuff function could not be normally restored). They argued the deltoid muscle could compensate for an absent rotator cuff if four conditions were present: (1) a lever arm effective from the start of movement; (2) a fixed center of rotation; (3) inherent stability; (4) maintenance of adequate external rotation. The result of their reasoning was the Delta Shoulder Prosthesis, the prototype of all other modern reverse shoulder arthroplasty designs. They briefly reported 14 patients with 2-year followup, finding acceptably restored function in 13. (Editor’s Note: The original article had no Abstract; this Abstract was therefore written to provide readers a summary.) The Classic article is © 1993 and is reprinted from Grammont PM, Baulot E. Delta Shoulder Prosthesis for Rotator Cuff Rupture. Orthopedics. 1993;16:65–68 available at http://www.orthosupersite.com/view.aspx?rid=84164. An accompanying biographical sketch of Paul Grammont is available at DOI 10.1007/s11999-011-1959-y.