Search

Direct-current generators, especially those based on the Schottky contacts between conductive polymers and metal electrodes, are efficient in converting mechanical stimuli into electrical energy. In contrast to triboelectric and piezoelectric generators, direct-current generators readily produce direct-current outputs and high currents that are crucial for integrating multiple energy-harvesting units in large scale and driving some types of devices. We are focusing on the relationship between Schottky barrier height and performance, systematically investigating the effects of various conductive polymers and electrodes on the outputs by both theoretical simulation and experiments. Tailoring the Schottky barrier height between conductive polymers and metal electrodes is demonstrated a significant approach to design the new DC generators. The preparation method of electrochemical deposition endows the generators flexibility, the linear relationship of current/voltage output vs. strain applied on the generators, combined with the large outputs offer advantages for the generator to work as flexible sensors. Furthermore, a mechanosensation-active matrix array based on direct-current generator for the strain monitoring demonstrated its promising prospects in flexible electronics. The direct-current generators with improved performance could serve as a stream new blood for versatile sensory systems and human-machine interactive interfaces.

Traditional methods to measure blood pressure are intermittent and may fail to detect the critical blood pressure fluctuations. Continuous blood pressure monitoring offers important clinical value in predicting cardiovascular diseases. Invasive (i.e., artery cannulation) and noninvasive approaches (e.g., volume clamping, pressure sensor, ultrasound, and optical methods) have limitations that prevent their generalized use outside of controlled settings, and few account properly for changes in the properties of the arteries (e.g., after drug administration, aging). This article proposes a method that combines a skin-interfaced pressure sensor with a sensor of pulse wave velocity, to continuously, noninvasively, and accurately measure the blood pressure, in ways that eliminate drifts and other artifacts that can prevent accurate, longitudinal monitoring. A scaling law is established to show that, for a linearly proportional relationship between the blood pressure and sensor pressure, the coefficient of proportionality depends on the elastic moduli Eartery and Etissue of the artery and tissue, respectively, and the artery thickness hartery and radius Rartery via a single, dimensionless combination, Earteryhartery/(EtissueRartery), i.e., the normalized artery stiffness. This scheme determines the blood pressure in a manner that explicitly accounts for changes in the artery elastic modulus and thickness (e.g., due to the administration of drugs, aging).

A major experimental drought research project entitled “Mechanisms and Early Warning of Drought Disasters over Northern China” (DroughtEX_China) was launched by the Ministry of Science and Technology of China in 2015. The objective of DroughtEX_China is to investigate drought disaster mechanisms and provide early-warning information via multisource observations and multiscale modeling. Since the implementation of DroughtEX_China, a comprehensive V-shape in situ observation network has been established to integrate different observational experiment systems for different landscapes, including crops in northern China. In this article, we introduce the experimental area, observational network configuration, ground- and air-based observing/testing facilities, implementation scheme, and data management procedures and sharing policy. The preliminary observational and numerical experimental results show that the following are important processes for understanding and modeling drought disasters over arid and semiarid regions: 1) the soil water vapor–heat interactions that affect surface soil moisture variability, 2) the effect of intermittent turbulence on boundary layer energy exchange, 3) the drought–albedo feedback, and 4) the transition from stomatal to nonstomatal control of plant photosynthesis with increasing drought severity. A prototype of a drought monitoring and forecasting system developed from coupled hydroclimate prediction models and an integrated multisource drought information platform is also briefly introduced. DroughtEX_China lasted for four years (i.e., 2015–18) and its implementation now provides regional drought monitoring and forecasting, risk assessment information, and a multisource data-sharing platform for drought adaptation over northern China, contributing to the global drought information system (GDIS).

Piezoelectric microsystems are of use in areas such as mechanical sensing, energy conversion and robotics. The systems typically have a planar structure, but transforming them into complex three-dimensional (3D) frameworks could enhance and extend their various modes of operation. Here, we report a controlled, nonlinear buckling process to convert lithographically defined two-dimensional patterns of electrodes and thin films of piezoelectric polymers into sophisticated 3D piezoelectric microsystems. To illustrate the engineering versatility of the approach, we create more than twenty different 3D geometries. With these structures, we then demonstrate applications in energy harvesting with tailored mechanical properties and root-mean-square voltages ranging from 2 mV to 790 mV, in multifunctional sensors for robotic prosthetic interfaces with improved responsivity (for example, anisotropic responses and sensitivity of 60 mV N−1 for normal force), and in bio-integrated devices with in vivo operational capabilities. The 3D geometries, especially those with ultralow stiffnesses or asymmetric layouts, yield unique mechanical attributes and levels of functionality that would be difficult or impossible to achieve with conventional two-dimensional designs. Nonlinear buckling processes can be used to transform thin films of piezoelectric polymers into sophisticated 3D piezoelectric microsystems with applications in energy harvesting, multifunctional sensing and bio-integrated devices.

Significance Wireless electronics for monitoring of skin hydration in a quantitative fashion have broad relevance to our understanding of dermatological health and skin structure in both clinical and home settings. Here, we present a miniaturized, long-range automated system that adheres gently to the skin to yield quantitative recordings of skin water content for both epidermis and dermis. This system supports capabilities in characterizing skin barrier, assessing severity of skin diseases, and evaluating cosmetic and medication efficacy, with high levels of repeatability and insensitivity to ambient. Benchtop and pilot studies on patients with skin diseases highlight key features of these devices and their potential for broad utility in clinical research and in home settings to guide the management of disorders of the skin., Precise, quantitative measurements of the hydration status of skin can yield important insights into dermatological health and skin structure and function, with additional relevance to essential processes of thermoregulation and other features of basic physiology. Existing tools for determining skin water content exploit surrogate electrical assessments performed with bulky, rigid, and expensive instruments that are difficult to use in a repeatable manner. Recent alternatives exploit thermal measurements using soft wireless devices that adhere gently and noninvasively to the surface of the skin, but with limited operating range (∼1 cm) and high sensitivity to subtle environmental fluctuations. This paper introduces a set of ideas and technologies that overcome these drawbacks to enable high-speed, robust, long-range automated measurements of thermal transport properties via a miniaturized, multisensor module controlled by a long-range (∼10 m) Bluetooth Low Energy system on a chip, with a graphical user interface to standard smartphones. Soft contact to the surface of the skin, with almost zero user burden, yields recordings that can be quantitatively connected to hydration levels of both the epidermis and dermis, using computational modeling techniques, with high levels of repeatability and insensitivity to ambient fluctuations in temperature. Systematic studies of polymers in layered configurations similar to those of human skin, of porcine skin with known levels of hydration, and of human subjects with benchmarks against clinical devices validate the measurement approach and associated sensor hardware. The results support capabilities in characterizing skin barrier function, assessing severity of skin diseases, and evaluating cosmetic and medication efficacy, for use in the clinic or in the home.

Introduction: The microbiota is recognized for its impact on both human health and disease. The human microbiota is made up of trillions of cells, including bacteria, viruses, and fungi. The largest population of microbes reside in the gut, prompting research for better understanding of the impact of gastrointestinal microbiota in different diseases. Evidence from numerous studies has pointed out the role of commensal microbes as key determinants of cancer pathogenesis. Moreover, gut microbiota may play an important role in chemoresistance; consequently, this knowledge might be important for novel strategies to improve anticancer treatment efficacy. Areas covered: We describe the role of microbiota in different gastrointestinal cancer types (esophageal, gastric, colorectal, hepatocellular and pancreatic-biliary tract cancers). Moreover, we analyzed the impact of the microbiota on resistance to anticancer therapies, and, lastly, we focused on possibilities of microbiota modulation to enhance anticancer therapy efficacy. Expert opinion: Increasing evidence shows that gut microbiota might influence resistance to anticancer treatment, including conventional chemotherapy, immunotherapy, radiotherapy, and surgery. Therefore, a better knowledge of gut microbiota and its interactions with anticancer drugs will enable us to develop novel anticancer treatment strategies and subsequently improve the cancer patients’ outcome.

Smartphone-compatible, wireless, battery-free hydration sensors can monitor skin diseases in any environment., Present-day dermatological diagnostic tools are expensive, time-consuming, require substantial operational expertise, and typically probe only the superficial layers of skin (~15 μm). We introduce a soft, battery-free, noninvasive, reusable skin hydration sensor (SHS) adherable to most of the body surface. The platform measures volumetric water content (up to ~1 mm in depth) and wirelessly transmits data to any near-field communication–compatible smartphone. The SHS is readily manufacturable, comprises unique powering and encapsulation strategies, and achieves high measurement precision (±5% volumetric water content) and resolution (±0.015°C skin surface temperature). Validation on n = 16 healthy/normal human participants reveals an average skin water content of ~63% across multiple body locations. Pilot studies on patients with atopic dermatitis (AD), psoriasis, urticaria, xerosis cutis, and rosacea highlight the diagnostic capability of the SHS (PAD = 0.0034) and its ability to study impact of topical treatments on skin diseases.

Hydrocephalus is a common disorder caused by the buildup of cerebrospinal fluid (CSF) in the brain. Treatment typically involves the surgical implantation of a pressure-regulated silicone tube assembly, known as a shunt. Unfortunately, shunts have extremely high failure rates and diagnosing shunt malfunction is challenging due to a combination of vague symptoms and a lack of a convenient means to monitor flow. Here, we introduce a wireless, wearable device that enables precise measurements of CSF flow, continuously or intermittently, in hospitals, laboratories or even in home settings. The technology exploits measurements of thermal transport through near-surface layers of skin to assess flow, with a soft, flexible, and skin-conformal device that can be constructed using commercially available components. Systematic benchtop studies and numerical simulations highlight all of the key considerations. Measurements on 7 patients establish high levels of functionality, with data that reveal time dependent changes in flow associated with positional and inertial effects on the body. Taken together, the results suggest a significant advance in monitoring capabilities for patients with shunted hydrocephalus, with potential for practical use across a range of settings and circumstances, and additional utility for research purposes in studies of CSF hydrodynamics.

Three-dimensional (3D) serpentine mesostructures assembled by mechanics-guided, deterministic 3D assembly have potential applications in energy harvesting, mechanical sensing, and soft robotics. One limitation is that the serpentine structures are required to have sufficient bending stiffness such that they can overcome the adhesion with the underlying substrate to fully buckle into the 3D shape (global buckling). This note introduces the use of cellular substrate in place of conventional homogeneous substrate to reduce the adhesion energy and therefore ease the above limitation. A theoretical model based on energetic analysis suggests that cellular substrates significantly enlarge the design space of global buckling. Numerical examples show that the enlarged design space enables 3D serpentine structures with reduced maximum strains and resonant frequencies, which offers more possibilities for their potential applications.

Flexible, large-area tactile sensors capable of simultaneously measuring in real time both the normal pressure and the tangential shear stress have many important applications, including those in artificial skin for uses in robotics, medicine and rehabilitation. Previously reported sensors exhibit responses to pressure and shear stress that are coupled, mainly due to nonlinearities, in ways that can be difficult to separate. A recently developed sensor based on techniques in mechanics-guided, deterministic three-dimensional (3D) assembly provides a route to decouple these responses such that the pressure and the shear stress can be determined explicitly and linearly from the change in resistance of multiple strain gauges integrated at carefully selected locations on the 3D structure. A clear understanding of the mechanics of this 3D structure-based sensor is essential for its optimization and application. Here analytic models, validated by finite element analysis, are presented for the deformation of such structures under pressure and shear stress. Analytic solutions in concise forms are derived for a buckled wavy ribbon encapsulated in a soft elastomer, which reveal the effect of the geometry and material parameters on the sensitivity, therefore establishing design guidelines for these devices.

Sensors that reproduce the complex characteristics of cutaneous receptors in the skin have important potential in the context of artificial systems for controlled interactions with the physical environment. Multimodal responses with high sensitivity and wide dynamic range are essential for many such applications. This report introduces a simple, three-dimensional type of microelectromechanical sensor that incorporates monocrystalline silicon nanomembranes as piezoresistive elements in a configuration that enables separate, simultaneous measurements of multiple mechanical stimuli, such as normal force, shear force, and bending, along with temperature. The technology provides high sensitivity measurements with millisecond response times, as supported by quantitative simulations. The fabrication and assembly processes allow scalable production of interconnected arrays of such devices with capabilities in spatiotemporal mapping. Integration with wireless data recording and transmission electronics allows operation with standard consumer devices.

Thermoelectric coils for energy harvesting are fabricated in miniature flexible devices., With accelerating trends in miniaturization of semiconductor devices, techniques for energy harvesting become increasingly important, especially in wearable technologies and sensors for the internet of things. Although thermoelectric systems have many attractive attributes in this context, maintaining large temperature differences across the device terminals and achieving low–thermal impedance interfaces to the surrounding environment become increasingly difficult to achieve as the characteristic dimensions decrease. Here, we propose and demonstrate an architectural solution to this problem, where thin-film active materials integrate into compliant, open three-dimensional (3D) forms. This approach not only enables efficient thermal impedance matching but also multiplies the heat flow through the harvester, thereby increasing the efficiencies for power conversion. Interconnected arrays of 3D thermoelectric coils built using microscale ribbons of monocrystalline silicon as the active material demonstrate these concepts. Quantitative measurements and simulations establish the basic operating principles and the key design features. The results suggest a scalable strategy for deploying hard thermoelectric thin-film materials in harvesters that can integrate effectively with soft materials systems, including those of the human body.

Needles for percutaneous biopsies of tumour tissue can be guided by ultrasound or computed tomography. However, despite best imaging practices and operator experience, high rates of inadequate tissue sampling, especially for small lesions, are common. Here, we introduce a needle-shaped ultrathin piezoelectric microsystem that can be injected or mounted directly onto conventional biopsy needles and used to distinguish abnormal tissue during the capture of biopsy samples, through quantitative real-time measurements of variations in tissue modulus. Using well-characterized synthetic soft materials, explanted tissues and animal models, we establish experimentally and theoretically the fundamental operating principles of the microsystem, as well as key considerations in materials choices and device designs. Through systematic tests on human livers with cancerous lesions, we demonstrate that the piezoelectric microsystem provides quantitative agreement with magnetic resonance elastography, the clinical gold standard for the measurement of tissue modulus. The piezoelectric microsystem provides a foundation for the design of tools for the rapid, modulus-based characterization of tissues.

Precise, quantitative measurements of the thermal properties of human skin can yield insights into thermoregulatory function, hydration, blood perfusion, wound healing, and other parameters of clinical interest. The need for wired power supply systems and data communication hardware limits, however, practical applicability of existing devices designed for measurements of this type. Here, a set of advanced materials, mechanics designs, integration schemes, and wireless circuits is reported as the basis for wireless, battery-free sensors that softly interface to the skin to enable precise measurements of its temperature and thermal transport properties. Calibration processes connect these parameters to the hydration state of the skin, the dynamics of near-surface flow through blood vessels and implanted catheters, and to recovery processes following trauma. Systematic engineering studies yield quantitative metrics in precision and reliability in real-world conditions. Evaluations on five human subjects demonstrate the capabilities in measurements of skin hydration and injury, including examples of continuous wear and monitoring over a period of 1 week, without disrupting natural daily activities.

Vavilov (1935) described China as the earliest and largest independent centre of origin of cultivated plants. Gansu Province occupies the geographic centre of China. With an area of 454,000 km2, latitudes ranging from 32°3′N to 42°57′N and elevations varying from 500 to 6200 m, the province has an extremely diverse climate and topography. Stretching 1653 km along the ancient Silk Road, Gansu also has a long history of agriculture (6000 years) and for centuries was exposed to dynamic cultural exchanges between the East and the West. The unique combination of these conditions allowed rapeseed to be introduced from Europe and the Middle East, to evolve over a long time of cultivation and to diversify to adapt to many types of ecological conditions and cropping systems in Gansu. Currently, rich genetic resources exist in Gansu for Brassica rapa, B. juncea, B. chinensis and Eruca sativa. Eight landraces are described to demonstrate the diversity of rapeseed genetic resources in Gansu. It is generally recognized that B. chinensis originated in China. Information provided in this paper suggests that Gansu and its adjacent regions could also be a centre of diversity for B. rapa and B. juncea.