Search

Thermo-active structures are underground facilities that enable the exchange of thermal energy between the ground and the overlying buildings, thus providing renewable means of space heating and cooling. Although this technology is becoming increasingly popular, the behaviour of geotechnical structures under additional thermal loading is still not fully understood. This paper focuses on the use of underground tunnels as thermo-active structures and explains their behaviour through a series of finite-element analyses based on an existing case study of isothermal tunnels in London Clay. The bespoke finite-element code adopted – the Imperial College Finite Element Program (ICFEP) – is capable of simulating the fully coupled thermo-hydro-mechanical behaviour of porous materials. The complex coupled interactions between the tunnel and the surrounding soil are explored by comparing results from selected types of coupled and uncoupled simulations. It is demonstrated that: (a) the thermally induced deformation of the tunnel and the ground are more critical design aspects than the thermally induced forces in the tunnel lining, and (b) the modelling approach in terms of the type of analysis, as well as the assumed permeability of the tunnel lining, has a significant effect on the computed tunnel response and, hence, must be chosen carefully.

Ground source energy systems (GSES) utilise low enthalpy geothermal energy and have been recognised as an efficient means of providing low carbon space heating and cooling. This study focuses on GSES where the exchange of heat between the ground and the building is achieved by circulating a fluid through heat exchanger pipes. Although numerical analysis is a powerful tool for exploring the performance of such systems, simulating the highly advective flows inside the heat exchanger pipes can be problematic. This paper presents an efficient approach for modelling these systems using the finite element method (FEM). The pipes are discretised with line elements and the conductive-advective heat flux along them is solved using the Petrov-Galerkin FEM instead of the conventional Galerkin FEM. Following extensive numerical studies, a modelling approach for simulating heat exchanger pipes, which employs line elements and a special material with enhanced thermal properties, is developed. The modelling approach is then adopted in three-dimensional simulations of two thermal response tests, with an excellent match between the computed and measured temperatures being obtained.

A new Petrov-Galerkin finite element method for two-dimensional (2D) highly advective flows in porous media, which removes numerical oscillations and retains its precision compared to the conventional Galerkin finite element method, is presented. A new continuous weighting function for quadratic elements is proposed. Moreover, a numerical scheme is developed to ensure the weighting factors are accurately determined for 2D non-uniform flows and 2D distorted elements. Finally, a series of numerical examples are performed to demonstrate the capability of the approach. Comparison against existing methods in the simulation of a benchmark problem further verifies the robustness of the proposed method.

Thermo-active foundations utilise heat energy stored in the ground to provide a reliable and effective means of space heating and cooling. Previous studies have shown that the effects of temperature changes on their response are highly dependent on their interaction with the surrounding ground. Consequently, it is necessary to consider this interaction and include both the thermal and mechanical behaviour of the ground in design. This paper addresses this issue by performing state-of-the-art finite-element analyses using the Imperial College Finite Element Program, which is capable of simulating the fully coupled thermo-hydro-mechanical behaviour of porous materials. First, the Lambeth College pile test is analysed to demonstrate the capability of the adopted modelling approach to capture the observed response under thermo-mechanical loading. Subsequently, a detailed study is carried out, demonstrating the impact of capturing the fully coupled thermo-hydro-mechanical response of the ground, the use of appropriate boundary conditions and the uncertainty surrounding thermal ground properties. It is demonstrated that the modelling approach has a large impact on the computed results, and therefore potentially on the design of thermo-active piles. Conversely, the effects of thermal conductivity and permeability of the soil are shown not to influence the pile behaviour significantly.

© 2016 Elsevier Ltd.Ground source energy systems, such as open-loop systems, have been widely employed in recent years due to their economic and environmental benefits compared to conventional heating and cooling systems. Numerical modelling of such geothermal system requires solving a coupled thermo-hydraulic problem characterised by a convection-dominated heat transfer which can be challenging for the Galerkin finite element method (GFEM). This paper first presents the coupled thermo-hydraulic governing formulation as well as the coupled thermo-hydraulic boundary condition, which can be implemented into a finite element software. Subsequently, the stability condition of the adopted time marching scheme for coupled thermo-hydraulic analysis is established analytically. The behaviour of highly convective problems is then investigated via a series of analyses where convective heat transfer along a soil bar is simulated, with recommendations on the choice of an adequate discretisation with different boundary conditions being provided to avoid oscillatory solutions. Finally, the conclusions from the analytical and numerical studies are applied to the simulation of a boundary value problem involving an open-loop system, with the results showing good agreement with an approximate solution. The main objective of this paper is to demonstrate that the GFEM is capable of dealing with highly convective geotechnical problems.