Search

Background Headache is an adverse event of coronavirus 2019 (COVID-19) vaccination. Whether patients with history of headache suffer more from vaccination-induced headaches is unknown. We aimed to uncover if headache patients develop more headaches after COVID-19 mRNA vaccination than healthy controls. Methods We performed a questionnaire survey for nursing staff in our hospital from April to May 2021. Based on baseline characteristics, we divided the participants into migraine, non-migrainous headache, and healthy control, and examined the occurrence and features of headache after COVID-19 vaccinations. Results We included 171 participants (15.2% migraine and 24.6% non-migrainous headache). Headache incidence after vaccinations was significantly higher in the migraine (69.2%) and non-migrainous headache (71.4%) groups than in the healthy control (37.9%) group. The incidence of headaches was significantly higher after the second dose compared to the first (45.6% vs. 20.5%). Conclusion Migraineurs and non-migrainous headache participants developed more headaches compared to the healthy controls after COVID-19 vaccination.

Highlights • This is the first case of meningitis with pyometra in a patient undergoing CCRT for cervical cancer. • Intrauterine manipulation under an immunosuppressive situation can potentially cause severe infection. • When patients have fever and deterioration of the consciousness, meningitis should be included as a differential diagnosis., Locally advanced cervical cancer occasionally induces pyometra, but there have been no reports of meningitis where pyometra is the cause of infection. Here, we report a case of Listeria monocytogenes meningitis related to pyometra during concurrent chemoradiotherapy (CCRT) in a cervical cancer patient. The patient, a 77-year-old woman, was diagnosed with Stage IIB (FIGO 2018) cervical adenocarcinoma, and CCRT was initiated. Pyometra was exacerbated during CCRT, and after her first brachytherapy, she presented at our hospital with fever and decreased consciousness level. After admission to the Intensive Care Unit, the patient lost consciousness and experienced frequent seizures; tracheal intubation was required. Whole-body computed tomography revealed pyometra; therefore, transvaginal removal of the abscess was performed. Laboratory tests and vital signs indicated septic shock, and meropenem was administered. L. monocytogenes was detected in the abscess from the uterine cavity and the blood cultures on the third day of hospitalization. A lumbar puncture was performed on the same day to investigate whether the patient had meningitis. A FilmArray meningitis/encephalitis panel test of the spinal fluid revealed L. monocytogenes. After the diagnosis of meningitis with L. monocytogenes, ampicillin and gentamicin were started, and the blood test results gradually improved. Five months after the initial episode, her consciousness recovered, however she still received mechanical ventilatory support. L. monocytogenes infections can occur in patients undergoing chemotherapy, even without the use of steroids or immunosuppressive agents. In cases with pyometra, intrauterine manipulation can increase the risk of severe infection.

We demonstrate a logic gate based on interference of forward volume spin waves (FVSWs) propagating in a 54 nm thick, 100 μm wide yttrium iron garnet waveguide grown epitaxially on a garnet substrate. Two FVSWs injected by coplanar waveguides were made to interfere constructively and destructively by varying their phase difference, showing an XNOR logic function. The reflected and resonant waves generated at the edges of the waveguide were suppressed using spin wave absorbers. The observed isolation ratio was 19 dB for a magnetic field of ~2.80 kOe ( = 223 kA m−1) applied perpendicular to the film. The wavelength and device length were ~8.9 μm and ~53 μm, respectively. Further, the interference state of the SWs was analyzed using three-dimensional radio frequency simulations.

In the fifty years since the postulation of Moore’s Law, the increasing energy consumption in silicon electronics has motivated research into emerging devices. An attractive research direction is processing information via the phase of spin waves within magnonic-logic circuits, which function without charge transport and the accompanying heat generation. The functional completeness of magnonic logic circuits based on the majority function was recently proved. However, the performance of such logic circuits was rather poor due to the difficulty of controlling spin waves in the input junction of the waveguides. Here, we show how Snell’s law describes the propagation of spin waves in the junction of a Ψ-shaped magnonic majority gate composed of yttrium iron garnet with a partially metallized surface. Based on the analysis, we propose a magnonic counterpart of a core-cladding waveguide to control the wave propagation in the junction. This study has therefore experimentally demonstrated a fundamental building block of a magnonic logic circuit.

Magnonics is an emerging field dealing with ultralow power consumption logic circuits, in which the flow of spin waves, rather than electric charges, transmits and processes information. Waves, including spin waves, excel at encoding information via their phase using interference. This enables a number of inputs to be processed in one device, which offers the promise of multi-input multi-output logic gates. To realize such an integrated device, it is essential to demonstrate spin wave interferometers using spatially isotropic spin waves with high operational stability. However, spin wave reflection at the waveguide edge has previously limited the stability of interfering waves, precluding the use of isotropic spin waves, i.e., forward volume waves. Here, a spin wave absorber is demonstrated comprising a yttrium iron garnet waveguide partially covered by gold. This device is shown experimentally to be a robust spin wave interferometer using the forward volume mode, with a large ON/OFF isolation value of 13.7 dB even in magnetic fields over 30 Oe.

Currently, hemodialysis is not adequate as a renal replacement therapy because it provides intermittent treatment and does not provide the metabolic function of renal tubules. The next generation of artificial kidney should replace intermittent hemodialysis with continuous hemofiltration and provide the full metabolic function of renal tubules. The current decade has witnessed the development of bioartificial kidneys using artificial membranes and renal tubular epithelial cells. Active transport and metabolic functions were confirmed in the confluent monolayers of tubular cells on artificial membranes. Bioartificial kidneys have succeeded in improving the prognosis of patients with multiple organ dysfunction, presumably by lowering plasma cytokine levels in patients. For successful treatment of chronic renal failure using bioartificial kidneys, it is necessary to overcome some technical hurdles such as improving the antithrombogenic properties of the surface of artificial membranes and prolonging the function of renal tubule cells on an artificial membrane. Transfection of functional protein genes into renal tubule cells enables bioartificial tubule devices to increase their transport capacity and metabolic functions such as digoxin secretion and water transport. The development of wearable roller pumps is also essential for the clinical application of a continuous treatment system.

This paper proposes a simple technique for minimizing computational effort when modelling practical problems which typically involve several non-linear soil materials with different plasticity parameters and joint elements. The technique is applicable to analyses performed using the pseudo-viscoplastic algorithm for solving non-linear problems. The applicability of the analysis is then evaluated by comparing the authors’ calculated results with published field observations. The paper demonstrates that significant computational savings can be achieved by optimizing the viscoplasticity parameters. It is also demonstrated that the method of analysis adopted provides encouraging agreement with observed field behaviour.

A bioartificial tubule device was applied for the treatment of 10 acute renal failure and multiple organ failure patients by Humes et al. A bioartificial kidney for chronic renal failure patients, however, has never been applied. In order to develop a bioartificial kidney for preventing and treating long-term complications of maintenance dialysis patients, we have to overcome difficulties such as antithrombogenic issue of hemofilters and development of long functioning tubule devices in the context of economical and easy treatment. Continuous hemofilters should modify with an antithrombogenic material on the inner surfaces of membranes to get more hemocompatible characteristics. We are developing an antithrombogenic continuous hemofilter coating with methacryloyloxyethyl phosphorylcholine polymer which will mimic phospholipid layers of human cell membrane on the inner surface of a hemofilter. The transportability of H2O, Na+, and glucose of bioartificial tubule devices using polysulfone hollow fiber modules and porcine proximal tubular epithelial cells LLC-PK1 were evaluated using two kinds of circuits of different medium inside and outside of the cell-attached hollow fiber membrane. Transport of H2O, Na+, and glucose were significantly increased when 2.5 g/dL of albumin was added, and plateaued on the eight day and then decreased thereafter until the 13th day. Transfection of a specific gene into human tubular epithelial cells might be required to keep contact inhibition in order to maintain a confluent monolayer for longer duration.

We have developed a system of laser-pump and synchrotron radiation probe microdiffraction to investigate the phase-change process on a nanosecond time scale of Ge2Sb2Te5 film embedded in multi-layer structures, which corresponds to real optical recording media. The measurements were achieved by combining (i) the pump-laser system with a pulse width of 300 ps, (ii) a highly brilliant focused microbeam with wide peak-energy width (ΔE∕E ~ 2%) made by focusing helical undulator radiation without monochromatization, and (iii) a precise sample rotation stage to make repetitive measurements. We successfully detected a very weak time-resolved diffraction signal by using this system from 100-nm-thick Ge2Sb2Te5 phase-change layers. This enabled us to find the dependence of the crystal-amorphous phase change process of the Ge2Sb2Te5 layers on laser power.

Spin-wave logic operation in a ferromagnetic thin film was investigated by using a three-antenna device. Binary output 1/0 signals were realized with the constructive and destructive spin-wave interference signals. It was found that the configuration of the RF antenna determines the phase of the input spin wave, which provides a control method of logic operation in spin-wave devices.

Microwave-assisted recording on a 500-Gbpsi-class perpendicular medium was experimentally demonstrated at room temperature. Magnetization reversal under a radio-frequency magnetic field was measured by an electrically shorted coplanar waveguide, which enabled us to evaluate the change in the medium's ferromagnetic resonance spectrum. A frequency-dependent reduction in the switching field was clearly observed in response to a microwave impulse 50 ns in duration. A significant reduction of up to 30% in the coercive field was achieved by applying a microwave impulse with an amplitude of 25 dBm and a frequency of 15 GHz.

Spin wave attenuation in the layered left perpendicularFeNi/Ptright perpendicular(6)/FeNi thin films was investigated by the time-domain electrical measurement. The spin-wave waveform was detected with an asymmetric coplanar strip transmission line, as an induced voltage flowing into a fast oscilloscope. We report that the amplitude of a spin-wave packet was systematically changed by controlling the thickness of a platinum layer, up to a maximum change of 50%. The virtues of spin wave, ultrafast propagation velocity and non-reciprocal emission, are preserved in this manner. This means that the Pt layer can manipulate an arbitral power-level of spin-wave input signal (reliable attenuator).

A single vortex-core switching in a ferromagnetic disk is detected in real time by using a three-terminal device with the tunneling magnetoresistance junction. We show that the device works as a vortex core memory cell, where reading and writing can be done in an all-electrical way: binary data corresponding to the core direction can be read out electrically as the amplitude of the output, while the data can be written electrically by applying a pulsed current.

If the ground along an underground pipeline route consists of cohesionless soils likely to liquefy under the influence of seismic shocks, a pipeline buried in such soils may float to the surface of the ground water. In order to investigate the effectiveness of four types of stabilizing techniques of underground pipelines against liquefaction, we performed big size shaking table test. This paper gives a detailed explanation for the observed data and describes the effectiveness of stabilizing techniques.

Designing a offshore pipeline for installation in an area subjected to earthquake activity requires an investigation of potential effects of seismic shocks. If the seabed or the filling material along a pipeline route consists of cohesionless soils likely to liquefy under the influence of seismic shocks, a pipeline buried in such soils may lose stability and float to the surface of the seabed. This paper describes the effectiveness of three types of stabilization techniques, 1) Anchoring the pipeline, 2) Increasing the weight of the pipeline, and 3) New stabilization technique which has been proposed by the authors. In order to simulate the behavior of pipeline under liquefaction, we used finite element model which was proposed by Minami, Kiyomiya and Tsuchida.